commit 6aaf49b495b446ff6eec0ac983f781ca0dc56a73 upstream.

The decision to rebuild .S_shipped is made based on the relative
timestamps of .S_shipped and .pl files but git makes this essentially
random. This means that the perl script might run anyway (usually at
most once per checkout), defeating the whole purpose of _shipped.

Fix by skipping the rule unless explicit make variables are provided:
REGENERATE_ARM_CRYPTO or REGENERATE_ARM64_CRYPTO.

This can produce nasty occasional build failures downstream, for example
for toolchains with broken perl. The solution is minimally intrusive to
make it easier to push into stable.

Another report on a similar issue here: https://lkml.org/lkml/2018/3/8/1379

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are are a couple of last-minute fixes for 4.16, mostly for
  regressions. As usual, the majory are device tree changes:

   - USB 3 support on rk3399 didn't work and is being reverted for now

   - One fix for an old suspend/resume bug on rk3399

   - A few regulator related fixes on Banana Pi M2, and on imx7d-sdb

   - A boot regression fix for all Aspeed SoCs failing to find their
     memory

   - One more dtc warning fix

  The other changes are:

   - A few updates to the MAINTAINERS file

   - A revert for an incorrect orion5x cleanup

   - Two power management fixes for OMAP"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP: Fix SRAM W+X mapping
  ARM: dts: aspeed: Add default memory node
  mailmap: Update email address for Gregory CLEMENT
  ARM: davinci: fix the GPIO lookup for omapl138-hawk
  MAINTAINERS: Update Tegra IOMMU maintainer
  ARM: dts: imx7d-sdb: Fix regulator-usb-otg2-vbus node name
  ARM: ux500: Fix PMU IRQ regression
  ARM: dts: rockchip: Add missing #sound-dai-cells on rk3288
  Revert "arm64: dts: rockchip: add usb3-phy otg-port support for rk3399"
  arm64: dts: rockchip: Fix rk3399-gru-* s2r (pinctrl hogs, wifi reset)
  ARM: OMAP: Fix dmtimer init for omap1
  MAINTAINERS: update email address for Maxime Ripard
  ARM: dts: sun6i: a31s: bpi-m2: add missing regulators
  ARM: dts: sun6i: a31s: bpi-m2: improve pmic properties

Pull ARM fixes from Russell King:
 "A small number of small fixes for ARM, mostly for some build issues.

  One fix for a regression caused by the cpu hotplug conversion from a
  few kernel versions ago"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8750/1: deflate_xip_data.sh: minor fixes
  ARM: 8748/1: mm: Define vdso_start, vdso_end as array
  ARM: 8747/1: make CONFIG_DEBUG_WX depend on MMU
  ARM: 8746/1: vfp: Go back to clearing vfp_current_hw_state[]

Pull "Allwinner Fixes for 4.16" from Maxime Ripard:

The first and second patches fix the regulator support for the Bananapi M2
board.

The last one updates my email address in MAINTAINERS.

* tag 'sunxi-fixes-for-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  MAINTAINERS: update email address for Maxime Ripard
  ARM: dts: sun6i: a31s: bpi-m2: add missing regulators
  ARM: dts: sun6i: a31s: bpi-m2: improve pmic properties

Pull "Two fixes for omap variants for v4.16-rc cycle" from Tony Lindgren:

Fix insecure W+X mapping warning for SRAM for omaps that
don't yet use drivers/misc/*sram*.c code. An earlier attempt
at fixing this turned out to cause problems with PM on omap3,
this version works with PM on omap3.

Also fix dmtimer probe for omap16xx devices that was noticed
with the pending dmtimer move to drivers. It seems this has
been broken for a while and is a non-critical for booting.
It is needed for PM on omap16xx though.

* tag 'omap-for-v4.16/sram-fix-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: Fix SRAM W+X mapping
  ARM: OMAP: Fix dmtimer init for omap1

Send nm complaints about broken pipe (when sed exits early) to /dev/null.
All errors should be printed to stderr.
Don't trap on normal exit so the trap can return an error code.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Define vdso_start, vdso_end as array to avoid compile-time analysis error
for the case of built with CONFIG_FORTIFY_SOURCE.

and, since vdso_start, vdso_end are used in vdso.c only,
move extern-declaration from vdso.h to vdso.c.

If kernel is built with CONFIG_FORTIFY_SOURCE,
compile-time error happens at this code.
- if (memcmp(&vdso_start, "177ELF", 4))

The size of "&vdso_start" is recognized as 1 byte, but n is 4,
So that compile-time error is reported.

Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jinbum Park <jinb.park7@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Without CONFIG_MMU, this results in a build failure:

./arch/arm/include/asm/memory.h:92:23: error: initializer element is not constant
 #define VECTORS_BASE  vectors_base
arch/arm/mm/dump.c:32:4: note: in expansion of macro 'VECTORS_BASE'
  { VECTORS_BASE, "Vectors" },

arch/arm/mm/dump.c:71:11: error: 'L_PTE_USER' undeclared here (not in a function); did you mean 'VTIME_USER'?
   .mask = L_PTE_USER,
           ^~~~~~~~~~

Obviously the feature only makes sense with an MMU, so let's add the
dependency here.

Fixes: a8e53c151fe7 ("ARM: 8737/1: mm: dump: add checking for writable and executable")
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Commit 384b38b66947 ("ARM: 7873/1: vfp: clear vfp_current_hw_state
for dying cpu") fixed the cpu dying notifier by clearing
vfp_current_hw_state[]. However commit e5b61bafe704 ("arm: Convert VFP
hotplug notifiers to state machine") incorrectly used the original
vfp_force_reload() function in the cpu dying notifier.

Fix it by going back to clearing vfp_current_hw_state[].

Fixes: e5b61bafe704 ("arm: Convert VFP hotplug notifiers to state machine")
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Kohji Okuno <okuno.kohji@jp.panasonic.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

We are still using custom SRAM code for some SoCs and are not marking
the PM code mapped to SRAM as read-only and executable after we're
done. With CONFIG_DEBUG_WX=y, we will get "Found insecure W+X mapping
at address" warning.

Let's fix this issue the same way as commit 728bbe75c82f ("misc: sram:
Introduce support code for protect-exec sram type") is doing for
drivers/misc/sram-exec.c.

On omap3, we need to restore SRAM when returning from off mode after
idle, so init time configuration is not enough.

And as we no longer have users for omap_sram_push_address() we can
make it static while at it.

Note that eventually we should be using sram-exec.c for all SoCs.

Cc: stable@vger.kernel.org	# v4.12+
Cc: Dave Gerlach <d-gerlach@ti.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>