commit 6c7a5dce22b3f3cc44be098e2837fa6797edb8b8 upstream.

Fix potential races in kvm_psci_vcpu_on() by taking the kvm->lock
mutex.  In general, it's a bad idea to allow more than one PSCI_CPU_ON
to process the same target VCPU at the same time.  One such problem
that may arise is that one PSCI_CPU_ON could be resetting the target
vcpu, which fills the entire sys_regs array with a temporary value
including the MPIDR register, while another looks up the VCPU based
on the MPIDR value, resulting in no target VCPU found.  Resolves both
races found with the kvm-unit-tests/arm/psci unit test.

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Reported-by: Levente Kurusa <lkurusa@redhat.com>
Suggested-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e058632670b709145730a134acc3f83f392f7aa7 upstream.

The following commit:

  commit 815dd18788fe0d41899f51b91d0560279cf16b0d
  Author: Bart Van Assche <bart.vanassche@sandisk.com>
  Date:   Fri Jan 20 13:04:04 2017 -0800

      treewide: Consolidate get_dma_ops() implementations

rearranges get_dma_ops in a way that xen_dma_ops are not returned when
running on Xen anymore, dev->dma_ops is returned instead (see
arch/arm/include/asm/dma-mapping.h:get_arch_dma_ops and
include/linux/dma-mapping.h:get_dma_ops).

Fix the problem by storing dev->dma_ops in dev_archdata, and setting
dev->dma_ops to xen_dma_ops. This way, xen_dma_ops is returned naturally
by get_dma_ops. The Xen code can retrieve the original dev->dma_ops from
dev_archdata when needed. It also allows us to remove __generic_dma_ops
from common headers.

Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Julien Grall <julien.grall@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
CC: linux@armlinux.org.uk
CC: catalin.marinas@arm.com
CC: will.deacon@arm.com
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: Julien Grall <julien.grall@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull ARM SoC fixes from Olof Johansson:
 "Again, a batch that's been sitting a couple of weeks, mostly because
  I anticipated a bit more material but it didn't show up -- which is
  good.

  These are all your garden variety fixes for ARM platforms.

  The most visible issue fixed here is probably the SMP reset issue on
  OMAP, the rest are minor stuff"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: allwinner: a64: add pmu0 regs for USB PHY
  ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer
  reset: add exported __reset_control_get, return NULL if optional
  ARM: orion5x: only call into phylib when available
  ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend
  ARM: dts: ti: fix PCI bus dtc warnings
  ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY
  ARM: dts: OMAP3: Fix MFG ID EEPROM
  ARM: sun8i: a33: add operating-points-v2 property to all nodes
  ARM: sun8i: a33: remove highest OPP to fix CPU crashes

Regression fix for omap interconnect code for deferred probe.
Without this fix we can get PM related warnings for devices that
use deferred probe. If necessary, this fix can wait for the
v4.12 merge window no problem.

* tag 'omap-for-v4.11/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer
  ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend
  ARM: dts: ti: fix PCI bus dtc warnings
  ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY
  ARM: dts: OMAP3: Fix MFG ID EEPROM

Signed-off-by: Olof Johansson <olof@lixom.net>

Pull ARM fixes from Russell King:
 "A number of ARM fixes:

   - prevent oopses caused by dma_get_sgtable() and declared DMA
     coherent memory

   - fix boot failure on nommu caused by ID_PFR1 access

   - a number of kprobes fixes from Jon Medhurst and Masami Hiramatsu"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8665/1: nommu: access ID_PFR1 only if CPUID scheme
  ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory
  arm: kprobes: Align stack to 8-bytes in test code
  arm: kprobes: Fix the return address of multiple kretprobes
  arm: kprobes: Skip single-stepping in recursing path if possible
  arm: kprobes: Allow to handle reentered kprobe on single-stepping

mvebu fixes for 4.11 (part 1)

Fix build of the board code for orion5x when some parts are configured
as module.

* tag 'mvebu-fixes-4.11-1' of git://git.infradead.org/linux-mvebu:
  ARM: orion5x: only call into phylib when available

Signed-off-by: Olof Johansson <olof@lixom.net>

Allwinner fixes for 4.11, bis

Two fixes for the recent A33 cpufreq support, and one to fix a missing
register in the A64 USB PHY node.

* tag 'sunxi-fixes-for-4.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: allwinner: a64: add pmu0 regs for USB PHY
  ARM: sun8i: a33: add operating-points-v2 property to all nodes
  ARM: sun8i: a33: remove highest OPP to fix CPU crashes

Signed-off-by: Olof Johansson <olof@lixom.net>

From: Christoffer Dall <cdall@linaro.org>

KVM/ARM Fixes for v4.11-rc6

Fixes include:
 - Fix a problem with GICv3 userspace save/restore
 - Clarify GICv2 userspace save/restore ABI
 - Be more careful in clearing GIC LRs
 - Add missing synchronization primitive to our MMU handling code

Starting from commit 5de85b9d57ab ("PM / runtime: Re-init runtime PM
states at probe error and driver unbind") pm_runtime core now changes
device runtime_status back to after RPM_SUSPENDED after a probe defer.
Certain OMAP devices make use of "ti,no-idle-on-init" flag which causes
omap_device_enable to be called during the BUS_NOTIFY_ADD_DEVICE event
during probe, along with pm_runtime_set_active.

This call to pm_runtime_set_active typically will prevent a call to
pm_runtime_get in a driver probe function from re-enabling the
omap_device. However, in the case of a probe defer that happens before
the driver probe function is able to run, such as a missing pinctrl
states defer, pm_runtime_reinit will set the device as RPM_SUSPENDED and
then once driver probe is actually able to run, pm_runtime_get will see
the device as suspended and call through to the omap_device layer,
attempting to enable the already enabled omap_device and causing errors
like this:

omap-gpmc 50000000.gpmc: omap_device: omap_device_enable() called from
invalid state 1
omap-gpmc 50000000.gpmc: use pm_runtime_put_sync_suspend() in driver?

We can avoid this error by making sure the pm_runtime status of a device
matches the omap_device state before a probe attempt. By extending the
omap_device bus notifier to act on the BUS_NOTIFY_BIND_DRIVER event we
can check if a device is enabled in omap_device but with a pm_runtime
status of RPM_SUSPENDED and once again mark the device as RPM_ACTIVE to
avoid a second incorrect call to omap_device_enable.

Fixes: 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe
error and driver unbind")
Tested-by: Franklin S Cooper Jr. <fcooper@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>