linux-stable.git/arch/arm, branch v3.18.91

ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory

2017-12-25T13:20:08+00:00

[ Upstream commit 916a008b4b8ecc02fbd035cfb133773dba1ff3d7 ]

dma_get_sgtable() tries to create a scatterlist table containing valid
struct page pointers for the coherent memory allocation passed in to it.

However, memory can be declared via dma_declare_coherent_memory(), or
via other reservation schemes which means that coherent memory is not
guaranteed to be backed by struct pages.  In such cases, the resulting
scatterlist table contains pointers to invalid pages, which causes
kernel oops later.

This patch adds detection of such memory, and refuses to create a
scatterlist table for such memory.

Reported-by: Shuah Khan 
Signed-off-by: Russell King 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend

2017-12-25T13:20:08+00:00

[ Upstream commit 9bcf53f34a2c1cebc45cc12e273dcd5f51fbc099 ]

mmc2 used for wl12xx was missing the keep-power-in suspend
parameter. As a result the board couldn't reach suspend state.

Signed-off-by: Eyal Reizer 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: ti: fix PCI bus dtc warnings

2017-12-25T13:20:07+00:00

[ Upstream commit 7d79f6098d82f8c09914d7799bc96891ad9c3baf ]

dtc recently added PCI bus checks. Fix these warnings.

Signed-off-by: Rob Herring 
Cc: "Benoît Cousson" 
Cc: Tony Lindgren 
Cc: linux-omap@vger.kernel.org
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one

2017-12-16T09:32:31+00:00

commit 5553b142be11e794ebc0805950b2e8313f93d718 upstream.

VTTBR_BADDR_MASK is used to sanity check the size and alignment of the
VTTBR address. It seems to currently be off by one, thereby only
allowing up to 39-bit addresses (instead of 40-bit) and also
insufficiently checking the alignment. This patch fixes it.

This patch is the 32bit pendent of Kristina's arm64 fix, and
she deserves the actual kudos for pinpointing that one.

Fixes: f7ed45be3ba52 ("KVM: ARM: World-switch implementation")
Reported-by: Kristina Martsenko 
Reviewed-by: Christoffer Dall 
Signed-off-by: Marc Zyngier 
Signed-off-by: Christoffer Dall 
Signed-off-by: Greg Kroah-Hartman

arm: KVM: Survive unknown traps from guests

2017-12-16T09:32:29+00:00

[ Upstream commit f050fe7a9164945dd1c28be05bf00e8cfb082ccf ]

Currently we BUG() if we see a HSR.EC value we don't recognise. As
configurable disables/enables are added to the architecture (controlled
by RES1/RES0 bits respectively), with associated synchronous exceptions,
it may be possible for a guest to trigger exceptions with classes that
we don't recognise.

While we can't service these exceptions in a manner useful to the guest,
we can avoid bringing down the host. Per ARM DDI 0406C.c, all currently
unallocated HSR EC encodings are reserved, and per ARM DDI
0487A.k_iss10775, page G6-4395, EC values within the range 0x00 - 0x2c
are reserved for future use with synchronous exceptions, and EC values
within the range 0x2d - 0x3f may be used for either synchronous or
asynchronous exceptions.

The patch makes KVM handle any unknown EC by injecting an UNDEFINED
exception into the guest, with a corresponding (ratelimited) warning in
the host dmesg. We could later improve on this with with a new (opt-in)
exit to the host userspace.

Cc: Dave Martin 
Cc: Suzuki K Poulose 
Reviewed-by: Christoffer Dall 
Signed-off-by: Mark Rutland 
Signed-off-by: Marc Zyngier 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: OMAP1: DMA: Correct the number of logical channels

2017-12-09T17:29:47+00:00

[ Upstream commit 657279778af54f35e54b07b6687918f254a2992c ]

OMAP1510, OMAP5910 and OMAP310 have only 9 logical channels.
OMAP1610, OMAP5912, OMAP1710, OMAP730, and OMAP850 have 16 logical channels
available.

The wired 17 for the lch_count must have been used to cover the 16 + 1
dedicated LCD channel, in reality we can only use 9 or 16 channels.

The d->chan_count is not used by the omap-dma stack, so we can skip the
setup. chan_count was configured to the number of logical channels and not
the actual number of physical channels anyways.

Signed-off-by: Peter Ujfalusi 
Acked-by: Aaro Koskinen 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: 8721/1: mm: dump: check hardware RO bit for LPAE

2017-11-30T08:35:49+00:00

commit 3b0c0c922ff4be275a8beb87ce5657d16f355b54 upstream.

When CONFIG_ARM_LPAE is set, the PMD dump relies on the software
read-only bit to determine whether a page is writable. This
concealed a bug which left the kernel text section writable
(AP2=0) while marked read-only in the software bit.

In a kernel with the AP2 bug, the dump looks like this:

    ---[ Kernel Mapping ]---
    0xc0000000-0xc0200000           2M RW NX SHD
    0xc0200000-0xc0600000           4M ro x  SHD
    0xc0600000-0xc0800000           2M ro NX SHD
    0xc0800000-0xc4800000          64M RW NX SHD

The fix is to check that the software and hardware bits are both
set before displaying "ro". The dump then shows the true perms:

    ---[ Kernel Mapping ]---
    0xc0000000-0xc0200000           2M RW NX SHD
    0xc0200000-0xc0600000           4M RW x  SHD
    0xc0600000-0xc0800000           2M RW NX SHD
    0xc0800000-0xc4800000          64M RW NX SHD

Fixes: ded947798469 ("ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE")
Signed-off-by: Philip Derrin 
Tested-by: Neil Dick 
Reviewed-by: Kees Cook 
Signed-off-by: Russell King 
Signed-off-by: Greg Kroah-Hartman

ARM: OMAP2+: Fix init for multiple quirks for the same SoC

2017-11-21T08:01:04+00:00

[ Upstream commit 6e613ebf4405fc09e2a8c16ed193b47f80a3cbed ]

It's possible that there are multiple quirks that need to be initialized
for the same SoC. Fix the issue by not returning on the first match.

Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Revert "ARM: dts: imx53-qsb-common: fix FEC pinmux config"

2017-11-18T10:06:30+00:00

This reverts commit 2eb85ef18c6570e8a59643cd8d5a66122461b1fc which is
commit 8b649e426336d7d4800ff9c82858328f4215ba01 upstream.

Turns out not to be a good idea in the stable kernels for now as Patrick
writes:
	As discussed for 4.4 stable queue this patch might break
	existing machines, if they use a different pinmux configuration
	with their own bootloader.

Reported-by: Patrick Brünn 
Cc: Shawn Guo 
Cc: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: 8720/1: ensure dump_instr() checks addr_limit

2017-11-15T09:04:13+00:00

commit b9dd05c7002ee0ca8b676428b2268c26399b5e31 upstream.

When CONFIG_DEBUG_USER is enabled, it's possible for a user to
deliberately trigger dump_instr() with a chosen kernel address.

Let's avoid problems resulting from this by using get_user() rather than
__get_user(), ensuring that we don't erroneously access kernel memory.

So that we can use the same code to dump user instructions and kernel
instructions, the common dumping code is factored out to __dump_instr(),
with the fs manipulated appropriately in dump_instr() around calls to
this.

Signed-off-by: Mark Rutland 
Signed-off-by: Russell King 
Signed-off-by: Greg Kroah-Hartman