linux-stable.git/arch/arm, branch v3.0.28

ARM: 7345/1: errata: update workaround for A9 erratum #743622

2012-03-12T17:32:59+00:00

commit efbc74ace95338484f8d732037b99c7c77098fce upstream.

Erratum #743622 affects all r2 variants of the Cortex-A9 processor, so
ensure that the workaround is applied regardless of the revision.

Reported-by: Russell King 
Signed-off-by: Will Deacon 
Signed-off-by: Russell King 
Signed-off-by: Greg Kroah-Hartman

OMAPDSS: HDMI: PHY burnout fix

2012-03-12T17:32:59+00:00

commit c49d005b6cc8491fad5b24f82805be2d6bcbd3dd upstream.

A hardware bug in the OMAP4 HDMI PHY causes physical damage to the board
if the HDMI PHY is kept powered on when the cable is not connected.

This patch solves the problem by adding hot-plug-detection into the HDMI
IP driver. This is not a real HPD support in the sense that nobody else
than the IP driver gets to know about the HPD events, but is only meant
to fix the HW bug.

The strategy is simple: If the display device is turned off by the user,
the PHY power is set to OFF. When the display device is turned on by the
user, the PHY power is set either to LDOON or TXON, depending on whether
the HDMI cable is connected.

The reason to avoid PHY OFF when the display device is on, but the cable
is disconnected, is that when the PHY is turned OFF, the HDMI IP is not
"ticking" and thus the DISPC does not receive pixel clock from the HDMI
IP. This would, for example, prevent any VSYNCs from happening, and
would thus affect the users of omapdss. By using LDOON when the cable is
disconnected we'll avoid the HW bug, but keep the HDMI working as usual
from the user's point of view.

Signed-off-by: Tomi Valkeinen 
Signed-off-by: Greg Kroah-Hartman

OMAP: 4430SDP/Panda: add HDMI HPD gpio

2012-03-12T17:32:59+00:00

commit aa74274b464d4aa24703963ac89a0ee942d5d267 upstream.

Both Panda and 4430SDP use GPIO 63 as HDMI hot-plug-detect. Configure
this GPIO in the board files.

Signed-off-by: Tomi Valkeinen 
Acked-by: Tony Lindgren 
Signed-off-by: Greg Kroah-Hartman

OMAP: 4430SDP/Panda: setup HDMI GPIO muxes

2012-03-12T17:32:59+00:00

commit 78a1ad8f12db70b8b0a4548b90704de08ee216ce upstream.

The HDMI GPIO pins LS_OE and CT_CP_HPD are not currently configured.
This patch configures them as output pins.

Signed-off-by: Tomi Valkeinen 
Acked-by: Tony Lindgren 
Signed-off-by: Greg Kroah-Hartman

OMAPDSS: remove wrong HDMI HPD muxing

2012-03-12T17:32:59+00:00

commit 7bb122d155f742fe2d79849090c825be7b4a247e upstream.

"hdmi_hpd" pin is muxed to INPUT and PULLUP, but the pin is not
currently used, and in the future when it is used, the pin is used as a
GPIO and is board specific, not an OMAP4 wide thing.

So remove the muxing for now.

Signed-off-by: Tomi Valkeinen 
Acked-by: Tony Lindgren 
Signed-off-by: Greg Kroah-Hartman

OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD

2012-03-12T17:32:59+00:00

commit 3932a32fcf5393f8be70ac99dc718ad7ad0a415b upstream.

The GPIO 60 on 4430sdp and Panda is not HPD GPIO, as currently marked in
the board files, but CT_CP_HPD, which is used to enable/disable HPD
functionality.

This patch renames the GPIO.

Signed-off-by: Tomi Valkeinen 
Acked-by: Tony Lindgren 
Signed-off-by: Greg Kroah-Hartman

OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios

2012-03-12T17:32:59+00:00

commit 575753e3bea3b67eef8e454fb87f719e3f7da599 upstream.

Instead of freeing the GPIOs individually, use gpio_free_array().

Signed-off-by: Tomi Valkeinen 
Acked-by: Tony Lindgren 
Signed-off-by: Greg Kroah-Hartman

OMAP: DSS2: HDMI: use default dividers

2012-03-12T17:32:58+00:00

commit 8d88767a4377171752c22ac39bcb2b505eb751da upstream.

Use default regn and regm2 dividers in the hdmi driver if the board file
does not define them.

Cc: Mythri P K 
Acked-by: Tony Lindgren 
Signed-off-by: Tomi Valkeinen 
Signed-off-by: Greg Kroah-Hartman

ARM: orion: Fix Orion5x GPIO regression from MPP cleanup

2012-03-12T17:32:58+00:00

commit b06540371063f0f07aafc1d1ac5e974da85c973c upstream.

Patchset "ARM: orion: Refactor the MPP code common in the orion
platform" broke at least Orion5x based platforms. These platforms have
pins configured as GPIO when the selector is not 0x0. However the
common code assumes the selector is always 0x0 for a GPIO lines. It
then ignores the GPIO bits in the MPP definitions, resulting in that
Orion5x machines cannot correctly configure there GPIO lines.

The Fix removes the assumption that the selector is always 0x0.
In order that none GPIO configurations are correctly blocked,
Kirkwood and mv78xx0 MPP definitions are corrected to only set the
GPIO bits for GPIO configurations.

This third version, which does not contain any whitespace changes,
and is rebased on v3.3-rc2.

Signed-off-by: Andrew Lunn 
Acked-by: Nicolas Pitre 
Signed-off-by: Olof Johansson

ARM: orion: Fix USB phy for orion5x.

2012-03-12T17:32:58+00:00

commit 72053353583230952c4b187e110e9da00dfc3afb upstream.

The patch "ARM: orion: Consolidate USB platform setup code.", commit
4fcd3f374a928081d391cd9a570afe3b2c692fdc broke USB on TS-7800 and
other orion5x boards, because the wrong type of PHY was being passed
to the EHCI driver in the platform data. Orion5x needs EHCI_PHY_ORION
and all the others want EHCI_PHY_NA.

Allow the mach- code to tell the generic plat-orion code which USB PHY
enum to place into the platform data.

Version 2: Rebase to v3.3-rc2.

Reported-by: Ambroz Bizjak 
Signed-off-by: Andrew Lunn 
Tested-by: Ambroz Bizjak 
Acked-by: Nicolas Pitre 
Signed-off-by: Olof Johansson 
Signed-off-by: Greg Kroah-Hartman