linux-stable.git/arch/arm, branch linux-6.3.y

ARM: dts: lan966x: kontron-d10: fix SPI CS

2023-07-11T17:39:44+00:00

[ Upstream commit fcb79ee3f0b15ed15f35eca5f24e952fdced9c61 ]

The pinctrl node was missing which change the pin mux to GPIO mode.
Add it so we don't have to rely on the bootloader to set the correct
mode.

Fixes: 79d83b3a458e ("ARM: dts: lan966x: add basic Kontron KSwitch D10 support")
Signed-off-by: Michael Walle 
Signed-off-by: Claudiu Beznea 
Link: https://lore.kernel.org/r/20230616-feature-d10-dt-cleanups-v1-2-50dd0452b8fe@kernel.org
Signed-off-by: Sasha Levin

ARM: dts: lan966x: kontron-d10: fix board reset

2023-07-11T17:39:44+00:00

[ Upstream commit bfcd5714f6424c03e385e0e9296dcd69855cfea7 ]

The pinctrl node was missing which change the pin mux to GPIO mode. Add
it.

Fixes: 79d83b3a458e ("ARM: dts: lan966x: add basic Kontron KSwitch D10 support")
Signed-off-by: Michael Walle 
[claudiu.beznea: moved pinctrl-* bindings after compatible]
Signed-off-by: Claudiu Beznea 
Link: https://lore.kernel.org/r/20230616-feature-d10-dt-cleanups-v1-1-50dd0452b8fe@kernel.org
Signed-off-by: Sasha Levin

ARM: dts: BCM5301X: fix duplex-full => full-duplex

2023-07-11T17:39:40+00:00

[ Upstream commit fd274b733bfdde3ca72f0fa2a37f032f3a8c402c ]

this typo was found by the dtbs_check
| ports:port@5:fixed-link: 'oneOf' conditional failed,
|  {'speed': [[1000]], 'duplex-full': True} is not of type 'array'
| 'duplex-full' does not match any of the regexes: 'pinctrl-[0-]..."

this should have been full-duplex;

Fixes: 935327a73553 ("ARM: dts: BCM5301X: Add DT for Meraki MR26")
Fixes: ec88a9c344d9 ("ARM: BCM5301X: Add DT for Meraki MR32")
Signed-off-by: Christian Lamparter 
Link: https://lore.kernel.org/r/50522f45566951a9eabd22820647924cc6b4a264.1686238550.git.chunkeey@gmail.com
Signed-off-by: Florian Fainelli 
Signed-off-by: Sasha Levin

ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx

2023-07-11T17:39:40+00:00

[ Upstream commit 076c74c592cabe4a47537fe5205b5b678bed010d ]

Use "dai-format" to configure DAI audio format as specified in
audio-graph-port.yaml bindings.

Fixes: 144d1ba70548 ("ARM: dts: stm32: Adapt STM32MP157 DK boards to stm32 DT diversity")
Signed-off-by: Olivier Moysan 
Signed-off-by: Alexandre Torgue 
Signed-off-by: Sasha Levin

ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2

2023-07-11T17:39:40+00:00

[ Upstream commit e3f2778b1b6ced649bffdc7cbb05b80bb92f2108 ]

The audio routing flow is not correct, the flow should be from source
(second element in the pair) to sink (first element in the pair). The
flow now is from "HP_OUT" to "Playback", where "Playback" is source
and "HP_OUT" is sink, i.e. the direction is swapped and there is no
direct link between the two either.

Fill in the correct routing, where "HP_OUT" supplies the "Headphone Jack",
"Line In Jack" supplies "LINE_IN" input, "Microphone Jack" supplies "MIC_IN"
input and "Mic Bias" supplies "Microphone Jack".

Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut 
Signed-off-by: Alexandre Torgue 
Signed-off-by: Sasha Levin

ARM: dts: iwg20d-q7-common: Fix backlight pwm specifier

2023-07-11T17:39:39+00:00

[ Upstream commit 0501fdec106a291c43b3c1b525cf22ab4c24b2d8 ]

make dtbs_check:

    arch/arm/boot/dts/renesas/r8a7743-iwg20d-q7.dtb: backlight: pwms: [[58, 0, 5000000], [0]] is too long
	    From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
    arch/arm/boot/dts/renesas/r8a7743-iwg20d-q7-dbcm-ca.dtb: backlight: pwms: [[67, 0, 5000000], [0]] is too long
	    From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
    arch/arm/boot/dts/renesas/r8a7744-iwg20d-q7-dbcm-ca.dtb: backlight: pwms: [[67, 0, 5000000], [0]] is too long
	    From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
    arch/arm/boot/dts/renesas/r8a7744-iwg20d-q7.dtb: backlight: pwms: [[58, 0, 5000000], [0]] is too long
	    From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml

PWM specifiers referring to R-Car PWM Timer Controllers should contain
only two cells.

Fix this by dropping the bogus third cell.

Fixes: 6f89dd9e9325d05b ("ARM: dts: iwg20d-q7-common: Add LCD support")
Signed-off-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/r/6e5c3167424a43faf8c1fa68d9667b3d87dc86d8.1684855911.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin

ARM: dts: meson8: correct uart_B and uart_C clock references

2023-07-11T17:39:39+00:00

[ Upstream commit 98b503c7fb13a17a47d8ebf15fa8f7c10118e75c ]

On Meson8 uart_B and uart_C do not work, because they are relying on
incorrect clocks. Change the references of pclk to the correct CLKID
(UART1 for uart_B and UART2 for uart_C), to allow use of the two uarts.

This was originally reported by Hans-Frieder Vogt for Meson8b [0], but
the same bug is also present in meson8.dtsi

[0] https://lore.kernel.org/linux-amlogic/trinity-bf20bcb9-790b-4ab9-99e3-0831ef8257f4-1680878185420@3c-app-gmx-bap55/

Fixes: 57007bfb5469 ("ARM: dts: meson8: Fix the UART device-tree schema validation")
Reported-by: Hans-Frieder Vogt  # for meson8b.dtsi
Signed-off-by: Martin Blumenstingl 
Link: https://lore.kernel.org/r/20230516203029.1031174-1-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong 
Signed-off-by: Sasha Levin

ARM: dts: qcom: apq8074-dragonboard: Set DMA as remotely controlled

2023-07-11T17:39:38+00:00

[ Upstream commit e60c230588d88036f974cec7e93361e2c4f62226 ]

Add the qcom,controlled-remotely property for the blsp2_bam
controller node. This board requires this, otherwise the board stalls
during the boot for some reason (most probably because TZ mishandles the
protection error and keeps on looping somewhere inside).

Fixes: 62bc81792223 dts: msm8974: Add blsp2_bam dma node
Signed-off-by: Dmitry Baryshkov 
Reviewed-by: Konrad Dybcio 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20230507190735.2333145-3-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin

ARM: dts: stm32: Shorten the AV96 HDMI sound card name

2023-07-11T17:39:38+00:00

[ Upstream commit 0cf765e598712addec34d0208cc1418c151fefb2 ]

Fix the following error in kernel log due to too long sound card name:
"
asoc-audio-graph-card sound: ASoC: driver name too long 'STM32MP1-AV96-HDMI' -> 'STM32MP1-AV96-H'
"

Fixes: e027da342772 ("ARM: dts: stm32: Add bindings for audio on AV96")
Signed-off-by: Marek Vasut 
Signed-off-by: Alexandre Torgue 
Signed-off-by: Sasha Levin

ARM: omap2: fix missing tick_broadcast() prototype

2023-07-11T17:39:38+00:00

[ Upstream commit 861bc1d2886d47bd57a2cbf2cda87fdbe3eb9d08 ]

omap2 contains a hack to define tick_broadcast() on non-SMP
configurations in place of the normal SMP definition. This one
causes a warning because of a missing prototype:

arch/arm/mach-omap2/board-generic.c:44:6: error: no previous prototype for 'tick_broadcast'

Make sure to always include the header with the declaration.

Fixes: d86ad463d670 ("ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs")
Acked-by: Aaro Koskinen 
Link: https://lore.kernel.org/r/20230516153109.514251-9-arnd@kernel.org
Signed-off-by: Arnd Bergmann 
Signed-off-by: Sasha Levin