linux-stable.git/arch/arm, branch linux-3.13.y Linux kernel stable tree ARM: 7941/2: Fix incorrect FDT initrd parameter override 2014-03-31T17:05:15+00:00 Ben Peddell klightspeed@killerwolves.net 2014-01-13T22:25:18+00:00 9c050c7fa1603f8e3010918f8204cd69cec4fd94 commit 4c235cb9e35407bdb4a2debeef4dc8721e8f91f2 upstream. Commit 65939301acdb (arm: set initrd_start/initrd_end for fdt scan) caused the FDT initrd_start and initrd_end to override the phys_initrd_start and phys_initrd_size set by the initrd= kernel parameter. With this patch initrd_start and initrd_end will be overridden if phys_initrd_start and phys_initrd_size are set by the kernel initrd= parameter. Fixes: 65939301acdb (arm: set initrd_start/initrd_end for fdt scan) Signed-off-by: Ben Peddell <klightspeed@killerwolves.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4c235cb9e35407bdb4a2debeef4dc8721e8f91f2 upstream.

Commit 65939301acdb (arm: set initrd_start/initrd_end for fdt scan)
caused the FDT initrd_start and initrd_end to override the
phys_initrd_start and phys_initrd_size set by the initrd= kernel
parameter.  With this patch initrd_start and initrd_end will be
overridden if phys_initrd_start and phys_initrd_size are set by the
kernel initrd= parameter.

Fixes: 65939301acdb (arm: set initrd_start/initrd_end for fdt scan)

Signed-off-by: Ben Peddell <klightspeed@killerwolves.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: 7991/1: sa1100: fix compile problem on Collie 2014-03-24T04:44:07+00:00 Linus Walleij linus.walleij@linaro.org 2014-02-25T21:41:41+00:00 ac0b124ab251e33d17c7b8179e6966949e6ef570 commit 052450fdc55894a39fbae93d9bbe43947956f663 upstream. Due to a problem in the MFD Kconfig it was not possible to compile the UCB battery driver for the Collie SA1100 system, in turn making it impossible to compile in the battery driver. (See patch "mfd: include all drivers in subsystem menu".) After fixing the MFD Kconfig (separate patch) a compile error appears in the Collie battery driver due to the <mach/collie.h> implicitly requiring <mach/hardware.h> through <linux/gpio.h> via <mach/gpio.h> prior to commit 40ca061b "ARM: 7841/1: sa1100: remove complex GPIO interface". Fix this up by including the required header into <mach/collie.h>. Cc: Andrea Adami <andrea.adami@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 052450fdc55894a39fbae93d9bbe43947956f663 upstream.

Due to a problem in the MFD Kconfig it was not possible to
compile the UCB battery driver for the Collie SA1100 system,
in turn making it impossible to compile in the battery driver.
(See patch "mfd: include all drivers in subsystem menu".)

After fixing the MFD Kconfig (separate patch) a compile error
appears in the Collie battery driver due to the <mach/collie.h>
implicitly requiring <mach/hardware.h> through <linux/gpio.h>
via <mach/gpio.h> prior to commit
40ca061b "ARM: 7841/1: sa1100: remove complex GPIO interface".

Fix this up by including the required header into
<mach/collie.h>.

Cc: Andrea Adami <andrea.adami@gmail.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: fix noMMU kallsyms symbol filtering 2014-03-24T04:44:07+00:00 Russell King rmk+kernel@arm.linux.org.uk 2014-02-26T19:40:46+00:00 efc489ecfa3cdb6fa01a7d4d21c136a7aaee54f3 commit 006fa2599bf0daf107cbb7a8a99fcfb9a998a169 upstream. With noMMU, CONFIG_PAGE_OFFSET was not being set correctly. As there's no MMU, PAGE_OFFSET should be equal to PHYS_OFFSET in all cases. This commit makes that explicit. Since we do this, we don't need to mess around in asm/memory.h with ifdefs to sort this out, so let's get rid of that, and there's no point offering the "Memory split" option for noMMU as that's meaningless there. Fixes: b9b32bf70f2f ("ARM: use linker magic for vectors and vector stubs") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 006fa2599bf0daf107cbb7a8a99fcfb9a998a169 upstream.

With noMMU, CONFIG_PAGE_OFFSET was not being set correctly.  As there's
no MMU, PAGE_OFFSET should be equal to PHYS_OFFSET in all cases.  This
commit makes that explicit.

Since we do this, we don't need to mess around in asm/memory.h with
ifdefs to sort this out, so let's get rid of that, and there's no point
offering the "Memory split" option for noMMU as that's meaningless
there.

Fixes: b9b32bf70f2f ("ARM: use linker magic for vectors and vector stubs")
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: tegra: only run PL310 init on systems with one 2014-03-07T06:06:09+00:00 Stephen Warren swarren@nvidia.com 2014-02-18T23:51:58+00:00 f6a19e4c5295259631f21c063dd92d616a724a11 commit 8859685785bfafadf9bc922dd3a2278e59886947 upstream. Fix tegra_init_cache() to check whether the system has a PL310 cache before touching the PL310 registers. This prevents access to non-existent registers on Tegra114 and later. Note for stable kernels: In <= v3.12, the file to patch is arch/arm/mach-tegra/common.c. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8859685785bfafadf9bc922dd3a2278e59886947 upstream.

Fix tegra_init_cache() to check whether the system has a PL310 cache
before touching the PL310 registers. This prevents access to non-existent
registers on Tegra114 and later.

Note for stable kernels:
In <= v3.12, the file to patch is arch/arm/mach-tegra/common.c.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: imx6: build pm-imx6q.c independently of CONFIG_PM 2014-03-07T06:06:09+00:00 Shawn Guo shawn.guo@linaro.org 2014-02-18T02:35:05+00:00 d15c4c3c6ed195480bb8ae6b3e48b8eb596a65ac commit 28a9f3b078c545064dcf4b46d2c6917554d1642e upstream. When building a kernel image with only CONFIG_CPU_IDLE but no CONFIG_PM, we will get the following link error. LD init/built-in.o arch/arm/mach-imx/built-in.o: In function `imx6q_enter_wait': platform-spi_imx.c:(.text+0x25c0): undefined reference to `imx6q_set_lpm' platform-spi_imx.c:(.text+0x25d4): undefined reference to `imx6q_set_lpm' arch/arm/mach-imx/built-in.o: In function `imx6q_cpuidle_init': platform-spi_imx.c:(.init.text+0x75d4): undefined reference to `imx6q_set_chicken_bit' make[1]: *** [vmlinux] Error 1 Since pm-imx6q.c has been a collection of library functions that access CCM low-power registers used by not only suspend but also cpuidle and other drivers, let's build pm-imx6q.c independently of CONFIG_PM to fix above error. Reported-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 28a9f3b078c545064dcf4b46d2c6917554d1642e upstream.

When building a kernel image with only CONFIG_CPU_IDLE but no CONFIG_PM,
we will get the following link error.

  LD      init/built-in.o
arch/arm/mach-imx/built-in.o: In function `imx6q_enter_wait':
platform-spi_imx.c:(.text+0x25c0): undefined reference to `imx6q_set_lpm'
platform-spi_imx.c:(.text+0x25d4): undefined reference to `imx6q_set_lpm'
arch/arm/mach-imx/built-in.o: In function `imx6q_cpuidle_init':
platform-spi_imx.c:(.init.text+0x75d4): undefined reference to `imx6q_set_chicken_bit'
make[1]: *** [vmlinux] Error 1

Since pm-imx6q.c has been a collection of library functions that access
CCM low-power registers used by not only suspend but also cpuidle and
other drivers, let's build pm-imx6q.c independently of CONFIG_PM to fix
above error.

Reported-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module 2014-03-07T06:06:08+00:00 Pekon Gupta pekon@ti.com 2014-01-28T06:12:41+00:00 2e5b5c42692d5448be5c7dbb8701d75c0fcd7f3b commit 980386d2d6d49e0b42f48550853ef1ad6aa5d79a upstream. Fixes: commit 75d3625e0e86b2d8d77b4e9c6f685fd7ea0d5a96 ARM: OMAP2+: gpmc: add DT bindings for OneNAND OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and register them platform_device for ONENAND driver to probe later. However this does not happen if generic MTD_ONENAND framework is built as module (CONFIG_MTD_ONENAND=m). Therefore, when MTD/ONENAND and MTD/ONENAND/OMAP2 modules are loaded, they are unable to find any matching platform_device and remain un-binded. This causes on board ONENAND flash to remain un-detected. This patch causes GPMC controller to parse DT nodes when CONFIG_MTD_ONENAND=y || CONFIG_MTD_ONENAND=m Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 980386d2d6d49e0b42f48550853ef1ad6aa5d79a upstream.

Fixes: commit 75d3625e0e86b2d8d77b4e9c6f685fd7ea0d5a96
       ARM: OMAP2+: gpmc: add DT bindings for OneNAND

OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and
register them platform_device for ONENAND driver to probe later. However this does
not happen if generic MTD_ONENAND framework is built as module (CONFIG_MTD_ONENAND=m).

Therefore, when MTD/ONENAND and MTD/ONENAND/OMAP2 modules are loaded, they are unable
to find any matching platform_device and remain un-binded. This causes on board
ONENAND flash to remain un-detected.

This patch causes GPMC controller to parse DT nodes when
CONFIG_MTD_ONENAND=y || CONFIG_MTD_ONENAND=m

Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module 2014-03-07T06:06:08+00:00 Pekon Gupta pekon@ti.com 2014-01-28T06:12:40+00:00 9990998222fecea3e0b7940d2df53a022d7b8df7 commit 6b187b21c92b6e2c7e8ef0b450181c37a3f31681 upstream. Fixes: commit bc6b1e7b86f5d8e4a6fc1c0189e64bba4077efe0 ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and register them platform_device for NAND driver to probe later. However this does not happen if generic MTD_NAND framework is built as module (CONFIG_MTD_NAND=m). Therefore, when MTD/NAND and MTD/NAND/OMAP2 modules are loaded, they are unable to find any matching platform_device and remain un-binded. This causes on board NAND flash to remain un-detected. This patch causes GPMC controller to parse DT nodes when CONFIG_MTD_NAND=y || CONFIG_MTD_NAND=m Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6b187b21c92b6e2c7e8ef0b450181c37a3f31681 upstream.

Fixes: commit bc6b1e7b86f5d8e4a6fc1c0189e64bba4077efe0
       ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND

OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and
register them platform_device for NAND driver to probe later. However this does
not happen if generic MTD_NAND framework is built as module (CONFIG_MTD_NAND=m).

Therefore, when MTD/NAND and MTD/NAND/OMAP2 modules are loaded, they are unable
to find any matching platform_device and remain un-binded. This causes on board
NAND flash to remain un-detected.

This patch causes GPMC controller to parse DT nodes when
CONFIG_MTD_NAND=y || CONFIG_MTD_NAND=m

Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: 7957/1: add DSB after icache flush in __flush_icache_all() 2014-03-07T06:06:08+00:00 Vinayak Kale vkale@apm.com 2014-02-12T06:30:01+00:00 a0d5d1bdaaf41a11bee6b4d5609177341334e430 commit 39544ac9df20f73e49fc6b9ac19ff533388c82c0 upstream. Add DSB after icache flush to complete the cache maintenance operation. Signed-off-by: Vinayak Kale <vkale@apm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 39544ac9df20f73e49fc6b9ac19ff533388c82c0 upstream.

Add DSB after icache flush to complete the cache maintenance operation.

Signed-off-by: Vinayak Kale <vkale@apm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: 7955/1: spinlock: ensure we have a compiler barrier before sev 2014-03-07T06:06:08+00:00 Will Deacon will.deacon@arm.com 2014-02-07T18:12:32+00:00 12f9e108a514f3d4878e26c0bec74142efe718b5 commit 7c8746a9eb287642deaad0e7c2cdf482dce5e4be upstream. When unlocking a spinlock, we require the following, strictly ordered sequence of events: <barrier> /* dmb */ <unlock> <barrier> /* dsb */ <sev> Whilst the code does indeed reflect this in terms of the architecture, the final <barrier> + <sev> have been contracted into a single inline asm without a "memory" clobber, therefore the compiler is at liberty to reorder the unlock to the end of the above sequence. In such a case, a waiting CPU may be woken up before the lock has been unlocked, leading to extremely poor performance. This patch reworks the dsb_sev() function to make use of the dsb() macro and ensure ordering against the unlock. Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7c8746a9eb287642deaad0e7c2cdf482dce5e4be upstream.

When unlocking a spinlock, we require the following, strictly ordered
sequence of events:

	<barrier>	/* dmb */
	<unlock>
	<barrier>	/* dsb */
	<sev>

Whilst the code does indeed reflect this in terms of the architecture,
the final <barrier> + <sev> have been contracted into a single inline
asm without a "memory" clobber, therefore the compiler is at liberty to
reorder the unlock to the end of the above sequence. In such a case,
a waiting CPU may be woken up before the lock has been unlocked, leading
to extremely poor performance.

This patch reworks the dsb_sev() function to make use of the dsb()
macro and ensure ordering against the unlock.

Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: 7953/1: mm: ensure TLB invalidation is complete before enabling MMU 2014-03-07T06:06:08+00:00 Will Deacon will.deacon@arm.com 2014-02-07T18:12:20+00:00 670c8af93264647d5399a68951cb253e2dc67b19 commit bae0ca2bc550d1ec6a118fb8f2696f18c4da3d8e upstream. During __v{6,7}_setup, we invalidate the TLBs since we are about to enable the MMU on return to head.S. Unfortunately, without a subsequent dsb instruction, the invalidation is not guaranteed to have completed by the time we write to the sctlr, potentially exposing us to junk/stale translations cached in the TLB. This patch reworks the init functions so that the dsb used to ensure completion of cache/predictor maintenance is also used to ensure completion of the TLB invalidation. Reported-by: Albin Tonnerre <Albin.Tonnerre@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bae0ca2bc550d1ec6a118fb8f2696f18c4da3d8e upstream.

During __v{6,7}_setup, we invalidate the TLBs since we are about to
enable the MMU on return to head.S. Unfortunately, without a subsequent
dsb instruction, the invalidation is not guaranteed to have completed by
the time we write to the sctlr, potentially exposing us to junk/stale
translations cached in the TLB.

This patch reworks the init functions so that the dsb used to ensure
completion of cache/predictor maintenance is also used to ensure
completion of the TLB invalidation.

Reported-by: Albin Tonnerre <Albin.Tonnerre@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>