Second Round of Renesas ARM Based SoC Fixes for v5.3

* RZ/G2M based HiHope main board
  - Re-enabled accidently disabled SDHI3 (eMMC) support

* tag 'renesas-fixes2-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: renesas: hihope-common: Fix eMMC status

Link: https://lore.kernel.org/r/cover.1567675986.git.horms+renesas@verge.net.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Renesas ARM Based SoC Fixes for v5.3

* R-Car D3 (r8a77995) based Draak Board
  - Correct backlight regulator name in device tree

* tag 'renesas-fixes-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: renesas: r8a77995: draak: Fix backlight regulator name

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

SDHI3 got accidentally disabled while adding USB 2.0 support,
this patch fixes it.

Fixes: 734d277f412a ("arm64: dts: renesas: hihope-common: Add USB 2.0 support")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Pull ARM SoC fixes from Arnd Bergmann:
 "The majority of the fixes this time are for OMAP hardware, here is a
  breakdown of the significant changes:

  Various device tree bug fixes:
   - TI am57xx boards need a voltage level fix to avoid damaging SD
     cards
   - vf610-bk4 fails to detect its flash due to an incorrect description
   - meson-g12a USB phy configuration fails
   - meson-g12b reboot should not power off the SD card
   - Some corrections for apparently harmless differences from the
     documentation.

  Regression fixes:
   - ams-delta FIQ interrupts broke in 5.3
   - TI am3/am4 mmc controllers broke in 5.2

  The logic_pio driver (used on some Huawei ARM servers) got a few bug
  fixes for reliability.

  And a couple of compile-time warning fixes"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
  soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST
  soc: ti: pm33xx: Make two symbols static
  soc: ti: pm33xx: Fix static checker warnings
  ARM: OMAP: dma: Mark expected switch fall-throughs
  ARM: dts: Fix incomplete dts data for am3 and am4 mmc
  bus: ti-sysc: Simplify cleanup upon failures in sysc_probe()
  ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack
  ARM: dts: dra74x: Fix iodelay configuration for mmc3
  ARM: dts: am335x: Fix UARTs length
  ARM: OMAP2+: Fix omap4 errata warning on other SoCs
  bus: hisi_lpc: Add .remove method to avoid driver unbind crash
  bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free
  lib: logic_pio: Add logic_pio_unregister_range()
  lib: logic_pio: Avoid possible overlap for unregistering regions
  lib: logic_pio: Fix RCU usage
  arm64: dts: amlogic: odroid-n2: keep SD card regulator always on
  arm64: dts: meson-g12a-sei510: enable IR controller
  arm64: dts: meson-g12a: add missing dwc2 phy-names
  ARM: dts: vf610-bk4: Fix qspi node description
  ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7
  ...

Pull arm64 fixes from Catalin Marinas:

 - Don't taint the kernel if CPUs have different sets of page sizes
   supported (other than the one in use).

 - Issue I-cache maintenance for module ftrace trampoline.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: ftrace: Ensure module ftrace trampoline is coherent with I-side
  arm64: cpufeature: Don't treat granule sizes as strict

The initial support for dynamic ftrace trampolines in modules made use
of an indirect branch which loaded its target from the beginning of
a special section (e71a4e1bebaf7 ("arm64: ftrace: add support for far
branches to dynamic ftrace")). Since no instructions were being patched,
no cache maintenance was needed. However, later in be0f272bfc83 ("arm64:
ftrace: emit ftrace-mod.o contents through code") this code was reworked
to output the trampoline instructions directly into the PLT entry but,
unfortunately, the necessary cache maintenance was overlooked.

Add a call to __flush_icache_range() after writing the new trampoline
instructions but before patching in the branch to the trampoline.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: James Morse <james.morse@arm.com>
Cc: <stable@vger.kernel.org>
Fixes: be0f272bfc83 ("arm64: ftrace: emit ftrace-mod.o contents through code")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arm64: dts: Amlogic fixes for v5.3-rc
- a few small DT fixes for g12a/g12b platforms

* tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: amlogic: odroid-n2: keep SD card regulator always on
  arm64: dts: meson-g12a-sei510: enable IR controller
  arm64: dts: meson-g12a: add missing dwc2 phy-names

If a CPU doesn't support the page size for which the kernel is
configured, then we will complain and refuse to bring it online. For
secondary CPUs (and the boot CPU on a system booting with EFI), we will
also print an error identifying the mismatch.

Consequently, the only time that the cpufeature code can detect a
granule size mismatch is for a granule other than the one that is
currently being used. Although we would rather such systems didn't
exist, we've unfortunately lost that battle and Kevin reports that
on his amlogic S922X (odroid-n2 board) we end up warning and taining
with defconfig because 16k pages are not supported by all of the CPUs.

In such a situation, we don't actually care about the feature mismatch,
particularly now that KVM only exposes the sanitised view of the CPU
registers (commit 93390c0a1b20 - "arm64: KVM: Hide unsupported AArch64
CPU features from guests"). Treat the granule fields as non-strict and
let Kevin run without a tainted kernel.

Cc: Marc Zyngier <maz@kernel.org>
Reported-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
[catalin.marinas@arm.com: changelog updated with KVM sanitised regs commit]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

All the way back to introducing dma_common_mmap we've defaulted to mark
the pages as uncached.  But this is wrong for DMA coherent devices.
Later on DMA_ATTR_WRITE_COMBINE also got incorrect treatment as that
flag is only treated special on the alloc side for non-coherent devices.

Introduce a new dma_pgprot helper that deals with the check for coherent
devices so that only the remapping cases ever reach arch_dma_mmap_pgprot
and we thus ensure no aliasing of page attributes happens, which makes
the powerpc version of arch_dma_mmap_pgprot obsolete and simplifies the
remaining ones.

Note that this means arch_dma_mmap_pgprot is a bit misnamed now, but
we'll phase it out soon.

Fixes: 64ccc9c033c6 ("common: dma-mapping: add support for generic dma_mmap_* calls")
Reported-by: Shawn Anastasio <shawn@anastas.io>
Reported-by: Gavin Li <git@thegavinli.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64

Pull kvm fixes from Paolo Bonzini:
 "Bugfixes (arm and x86) and cleanups"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  selftests: kvm: Adding config fragments
  KVM: selftests: Update gitignore file for latest changes
  kvm: remove unnecessary PageReserved check
  KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable
  KVM: arm: Don't write junk to CP15 registers on reset
  KVM: arm64: Don't write junk to sysregs on reset
  KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block
  x86: kvm: remove useless calls to kvm_para_available
  KVM: no need to check return value of debugfs_create functions
  KVM: remove kvm_arch_has_vcpu_debugfs()
  KVM: Fix leak vCPU's VMCS value into other pCPU
  KVM: Check preempted_in_kernel for involuntary preemption
  KVM: LAPIC: Don't need to wakeup vCPU twice afer timer fire
  arm64: KVM: hyp: debug-sr: Mark expected switch fall-through
  KVM: arm64: Update kvm_arm_exception_class and esr_class_str for new EC
  KVM: arm: vgic-v3: Mark expected switch fall-through
  arm64: KVM: regmap: Fix unexpected switch fall-through
  KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter index