Pull arm64 fixes from Catalin Marinas: - In copy_highpage(), only reset the tag of the destination pointer if KASAN_HW_TAGS is enabled so that user-space MTE does not interfere with KASAN_SW_TAGS (which relies on top-byte-ignore). - Remove warning if SME is detected without SVE, the kernel can cope with such configuration (though none in the field currently). - In cfi_handler(), pass the ESR_EL1 value to die() for consistency with other die() callers. - Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP on arm64 since the pte manipulation from the generic vmemmap_remap_pte() does not follow the required ARM break-before-make sequence (clear the pte, flush the TLBs, set the new pte). It may be re-enabled once this sequence is sorted. - Fix possible memory leak in the arm64 ACPI code if the SMCCC version and conduit checks fail. - Forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE since gcc ignores -falign-functions=N with -Os. - Don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN as no randomisation would actually take place. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kaslr: don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN arm64: ftrace: forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE arm64: acpi: Fix possible memory leak of ffh_ctxt arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP arm64: pass ESR_ELx to die() of cfi_handler arm64/fpsimd: Remove warning for SME without SVE arm64: Reset KASAN tag in copy_highpage with HW tags only
Support for SME without SVE is architecturally valid and has now been tested well enough so let's remove the warning message that is displayed at boot. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230209-arm64-sme-no-sve-v1-1-74eb3df2f878@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull arm64 updates from Catalin Marinas: - Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore - Include TPIDR2 in the signal context and add the corresponding kselftests - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64 - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values) - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone - Further arm64 sysreg conversion and some fixes - arm64 kselftest fixes and improvements - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation - Pseudo-NMI code generation optimisations - Minor fixes for SME and TPIDR2 handling - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits) arm64: fix .idmap.text assertion for large kernels kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context arm64: kprobes: Drop ID map text from kprobes blacklist perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 arm64/sme: Fix __finalise_el2 SMEver check drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable arm64/signal: Only read new data when parsing the ZT context arm64/signal: Only read new data when parsing the ZA context arm64/signal: Only read new data when parsing the SVE context arm64/signal: Avoid rereading context frame sizes arm64/signal: Make interface for restore_fpsimd_context() consistent arm64/signal: Remove redundant size validation from parse_user_sigframe() arm64/signal: Don't redundantly verify FPSIMD magic arm64/cpufeature: Use helper macros to specify hwcaps arm64/cpufeature: Always use symbolic name for feature value in hwcaps arm64/sysreg: Initial unsigned annotations for ID registers arm64/sysreg: Initial annotation of signed ID registers ...
* arm64/for-next/perf: perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable perf: arm_spe: Support new SPEv1.2/v8.7 'not taken' event perf: arm_spe: Use new PMSIDR_EL1 register enums perf: arm_spe: Drop BIT() and use FIELD_GET/PREP accessors arm64/sysreg: Convert SPE registers to automatic generation arm64: Drop SYS_ from SPE register defines perf: arm_spe: Use feature numbering for PMSEVFR_EL1 defines perf/marvell: Add ACPI support to TAD uncore driver perf/marvell: Add ACPI support to DDR uncore driver perf/arm-cmn: Reset DTM_PMU_CONFIG at probe drivers/perf: hisi: Extract initialization of "cpa_pmu->pmu" drivers/perf: hisi: Simplify the parameters of hisi_pmu_init() drivers/perf: hisi: Advertise the PERF_PMU_CAP_NO_EXCLUDE capability * for-next/sysreg: : arm64 sysreg and cpufeature fixes/updates KVM: arm64: Use symbolic definition for ISR_EL1.A arm64/sysreg: Add definition of ISR_EL1 arm64/sysreg: Add definition for ICC_NMIAR1_EL1 arm64/cpufeature: Remove 4 bit assumption in ARM64_FEATURE_MASK() arm64/sysreg: Fix errors in 32 bit enumeration values arm64/cpufeature: Fix field sign for DIT hwcap detection * for-next/sme: : SME-related updates arm64/sme: Optimise SME exit on syscall entry arm64/sme: Don't use streaming mode to probe the maximum SME VL arm64/ptrace: Use system_supports_tpidr2() to check for TPIDR2 support * for-next/kselftest: (23 commits) : arm64 kselftest fixes and improvements kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context kselftest/arm64: Fix enumeration of systems without 128 bit SME for SSVE+ZA kselftest/arm64: Fix enumeration of systems without 128 bit SME kselftest/arm64: Don't require FA64 for streaming SVE tests kselftest/arm64: Limit the maximum VL we try to set via ptrace kselftest/arm64: Correct buffer size for SME ZA storage kselftest/arm64: Remove the local NUM_VL definition kselftest/arm64: Verify simultaneous SSVE and ZA context generation kselftest/arm64: Verify that SSVE signal context has SVE_SIG_FLAG_SM set kselftest/arm64: Remove spurious comment from MTE test Makefile kselftest/arm64: Support build of MTE tests with clang kselftest/arm64: Initialise current at build time in signal tests kselftest/arm64: Don't pass headers to the compiler as source kselftest/arm64: Remove redundant _start labels from FP tests kselftest/arm64: Fix .pushsection for strings in FP tests kselftest/arm64: Run BTI selftests on systems without BTI kselftest/arm64: Fix test numbering when skipping tests kselftest/arm64: Skip non-power of 2 SVE vector lengths in fp-stress kselftest/arm64: Only enumerate power of two VLs in syscall-abi ... * for-next/misc: : Miscellaneous arm64 updates arm64/mm: Intercept pfn changes in set_pte_at() Documentation: arm64: correct spelling arm64: traps: attempt to dump all instructions arm64: Apply dynamic shadow call stack patching in two passes arm64: el2_setup.h: fix spelling typo in comments arm64: Kconfig: fix spelling arm64: cpufeature: Use kstrtobool() instead of strtobool() arm64: Avoid repeated AA64MMFR1_EL1 register read on pagefault path arm64: make ARCH_FORCE_MAX_ORDER selectable * for-next/sme2: (23 commits) : Support for arm64 SME 2 and 2.1 arm64/sme: Fix __finalise_el2 SMEver check kselftest/arm64: Remove redundant _start labels from zt-test kselftest/arm64: Add coverage of SME 2 and 2.1 hwcaps kselftest/arm64: Add coverage of the ZT ptrace regset kselftest/arm64: Add SME2 coverage to syscall-abi kselftest/arm64: Add test coverage for ZT register signal frames kselftest/arm64: Teach the generic signal context validation about ZT kselftest/arm64: Enumerate SME2 in the signal test utility code kselftest/arm64: Cover ZT in the FP stress test kselftest/arm64: Add a stress test program for ZT0 arm64/sme: Add hwcaps for SME 2 and 2.1 features arm64/sme: Implement ZT0 ptrace support arm64/sme: Implement signal handling for ZT arm64/sme: Implement context switching for ZT0 arm64/sme: Provide storage for ZT0 arm64/sme: Add basic enumeration for SME2 arm64/sme: Enable host kernel to access ZT0 arm64/sme: Manually encode ZT0 load and store instructions arm64/esr: Document ISS for ZT0 being disabled arm64/sme: Document SME 2 and SME 2.1 ABI ... * for-next/tpidr2: : Include TPIDR2 in the signal context kselftest/arm64: Add test case for TPIDR2 signal frame records kselftest/arm64: Add TPIDR2 to the set of known signal context records arm64/signal: Include TPIDR2 in the signal context arm64/sme: Document ABI for TPIDR2 signal information * for-next/scs: : arm64: harden shadow call stack pointer handling arm64: Stash shadow stack pointer in the task struct on interrupt arm64: Always load shadow stack pointer directly from the task struct * for-next/compat-hwcap: : arm64: Expose compat ARMv8 AArch32 features (HWCAPs) arm64: Add compat hwcap SSBS arm64: Add compat hwcap SB arm64: Add compat hwcap I8MM arm64: Add compat hwcap ASIMDBF16 arm64: Add compat hwcap ASIMDFHM arm64: Add compat hwcap ASIMDDP arm64: Add compat hwcap FPHP and ASIMDHP * for-next/ftrace: : Add arm64 support for DYNAMICE_FTRACE_WITH_CALL_OPS arm64: avoid executing padding bytes during kexec / hibernation arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS arm64: ftrace: Update stale comment arm64: patching: Add aarch64_insn_write_literal_u64() arm64: insn: Add helpers for BTI arm64: Extend support for CONFIG_FUNCTION_ALIGNMENT ACPI: Don't build ACPICA with '-Os' Compiler attributes: GCC cold function alignment workarounds ftrace: Add DYNAMIC_FTRACE_WITH_CALL_OPS * for-next/efi-boot-mmu-on: : Permit arm64 EFI boot with MMU and caches on arm64: kprobes: Drop ID map text from kprobes blacklist arm64: head: Switch endianness before populating the ID map efi: arm64: enter with MMU and caches enabled arm64: head: Clean the ID map and the HYP text to the PoC if needed arm64: head: avoid cache invalidation when entering with the MMU on arm64: head: record the MMU state at primary entry arm64: kernel: move identity map out of .text mapping arm64: head: Move all finalise_el2 calls to after __enable_mmu * for-next/ptrauth: : arm64 pointer authentication cleanup arm64: pauth: don't sign leaf functions arm64: unify asm-arch manipulation * for-next/pseudo-nmi: : Pseudo-NMI code generation optimisations arm64: irqflags: use alternative branches for pseudo-NMI logic arm64: add ARM64_HAS_GIC_PRIO_RELAXED_SYNC cpucap arm64: make ARM64_HAS_GIC_PRIO_MASKING depend on ARM64_HAS_GIC_CPUIF_SYSREGS arm64: rename ARM64_HAS_IRQ_PRIO_MASKING to ARM64_HAS_GIC_PRIO_MASKING arm64: rename ARM64_HAS_SYSREG_GIC_CPUIF to ARM64_HAS_GIC_CPUIF_SYSREGS
When the system supports SME2 the ZT0 register must be context switched as part of the floating point state. This register is stored immediately after ZA in memory and is only accessible when PSTATE.ZA is set so we handle it in the same functions we use to save and restore ZA. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20221208-arm64-sme2-v4-10-f2fa0aef982f@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add basic feature detection for SME2, detecting that the feature is present and disabling traps for ZT0. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20221208-arm64-sme2-v4-8-f2fa0aef982f@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In preparation for adding support for storage for ZT0 to the thread_struct rename za_state to sme_state. Since ZT0 is accessible when PSTATE.ZA is set just like ZA itself we will extend the allocation done for ZA to cover it, avoiding the need to further expand task_struct for non-SME tasks. No functional changes. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20221208-arm64-sme2-v4-1-f2fa0aef982f@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
During development the architecture added the RDSVL instruction which means we do not need to enter streaming mode to enumerate the SME VLs, use it when we probe the maximum supported VL. Other users were already updated. No functional change. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20221223-arm64-sme-probe-max-v1-1-cbde68f67ad0@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When refactoring fpsimd_load() to support keeping SVE enabled over syscalls
support for systems with SME but not SVE was broken. The code that selects
between loading regular FPSIMD and SVE states was guarded by using
system_supports_sve() but is also needed to handle the streaming SVE state
in SME only systems where that check will be false. Fix this by also
checking for system_supports_sme().
Fixes: a0136be443d5 ("arm64/fpsimd: Load FP state based on recorded data type")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221223-arm64-fix-sme-only-v1-1-938d663f69e5@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
* for-next/sve-state: arm64/fp: Use a struct to pass data to fpsimd_bind_state_to_cpu() arm64/sve: Leave SVE enabled on syscall if we don't context switch arm64/fpsimd: SME no longer requires SVE register state arm64/fpsimd: Load FP state based on recorded data type arm64/fpsimd: Stop using TIF_SVE to manage register saving in KVM arm64/fpsimd: Have KVM explicitly say which FP registers to save arm64/fpsimd: Track the saved FPSIMD state type separately to TIF_SVE KVM: arm64: Discard any SVE state when entering KVM guests