We will be sharing efi-entry.S with the zboot decompressor build, which
does not link against vmlinux directly. So move it into the libstub
source directory so we can include in the libstub static library.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>

To allow efi_enter_kernel() to be shared with the EFI zboot decompressor
build, drop another reference to dcache_clean_poc() and replace it with
a single DC CVAC* instruction. To ensure that it covers the remainder of
efi_enter_kernel() as intended, reorganize the code a bit so it fits in
a 32-byte cacheline, and align it to 32 bytes. (Even though the
architecture defines 16 as the minimum D-cache line size, even the
chosen value of 32 is highly unlikely to ever be encountered on real
hardware, and this works with any line size >= 32)

* due to ARM64_WORKAROUND_CLEAN_CACHE, we actually use a DC CIVAC here

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>

The efi_enter_kernel() routine will be shared between the existing EFI
stub and the zboot decompressor, and the version of
dcache_clean_to_poc() that the core kernel exports to the stub will not
be available in the latter case.

So move the handling into the .c file which will remain part of the stub
build that integrates directly with the kernel proper.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>

Although naming across the codebase isn't that consistent, it
tends to follow certain patterns. Moreover, the term "flush"
isn't defined in the Arm Architecture reference manual, and might
be interpreted to mean clean, invalidate, or both for a cache.

Rename arm64-internal functions to make the naming internally
consistent, as well as making it consistent with the Arm ARM, by
specifying whether it applies to the instruction, data, or both
caches, whether the operation is a clean, invalidate, or both.
Also specify which point the operation applies to, i.e., to the
point of unification (PoU), coherency (PoC), or persistence
(PoP).

This commit applies the following sed transformation to all files
under arch/arm64:

"s/\b__flush_cache_range\b/caches_clean_inval_pou_macro/g;"\
"s/\b__flush_icache_range\b/caches_clean_inval_pou/g;"\
"s/\binvalidate_icache_range\b/icache_inval_pou/g;"\
"s/\b__flush_dcache_area\b/dcache_clean_inval_poc/g;"\
"s/\b__inval_dcache_area\b/dcache_inval_poc/g;"\
"s/__clean_dcache_area_poc\b/dcache_clean_poc/g;"\
"s/\b__clean_dcache_area_pop\b/dcache_clean_pop/g;"\
"s/\b__clean_dcache_area_pou\b/dcache_clean_pou/g;"\
"s/\b__flush_cache_user_range\b/caches_clean_inval_user_pou/g;"\
"s/\b__flush_icache_all\b/icache_inval_all_pou/g;"

Note that __clean_dcache_area_poc is deliberately missing a word
boundary check at the beginning in order to match the efistub
symbols in image-vars.h.

Also note that, despite its name, __flush_icache_range operates
on both instruction and data caches. The name change here
reflects that.

No functional change intended.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210524083001.2586635-19-tabba@google.com
Signed-off-by: Will Deacon <will@kernel.org>

To be consistent with other functions with similar names and
functionality in cacheflush.h, cache.S, and cachetlb.rst, change
to specify the range in terms of start and end, as opposed to
start and size.

Because the code is shared with __dma_clean_area, it changes the
parameters for that as well. However, __dma_clean_area is local to
cache.S, so no other users are affected.

No functional change intended.

Reported-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210524083001.2586635-14-tabba@google.com
Signed-off-by: Will Deacon <will@kernel.org>

Pull arm64 updates from Will Deacon:
 "A sizeable pile of arm64 updates for 5.8.

  Summary below, but the big two features are support for Branch Target
  Identification and Clang's Shadow Call stack. The latter is currently
  arm64-only, but the high-level parts are all in core code so it could
  easily be adopted by other architectures pending toolchain support

  Branch Target Identification (BTI):

   - Support for ARMv8.5-BTI in both user- and kernel-space. This allows
     branch targets to limit the types of branch from which they can be
     called and additionally prevents branching to arbitrary code,
     although kernel support requires a very recent toolchain.

   - Function annotation via SYM_FUNC_START() so that assembly functions
     are wrapped with the relevant "landing pad" instructions.

   - BPF and vDSO updates to use the new instructions.

   - Addition of a new HWCAP and exposure of BTI capability to userspace
     via ID register emulation, along with ELF loader support for the
     BTI feature in .note.gnu.property.

   - Non-critical fixes to CFI unwind annotations in the sigreturn
     trampoline.

  Shadow Call Stack (SCS):

   - Support for Clang's Shadow Call Stack feature, which reserves
     platform register x18 to point at a separate stack for each task
     that holds only return addresses. This protects function return
     control flow from buffer overruns on the main stack.

   - Save/restore of x18 across problematic boundaries (user-mode,
     hypervisor, EFI, suspend, etc).

   - Core support for SCS, should other architectures want to use it
     too.

   - SCS overflow checking on context-switch as part of the existing
     stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.

  CPU feature detection:

   - Removed numerous "SANITY CHECK" errors when running on a system
     with mismatched AArch32 support at EL1. This is primarily a concern
     for KVM, which disabled support for 32-bit guests on such a system.

   - Addition of new ID registers and fields as the architecture has
     been extended.

  Perf and PMU drivers:

   - Minor fixes and cleanups to system PMU drivers.

  Hardware errata:

   - Unify KVM workarounds for VHE and nVHE configurations.

   - Sort vendor errata entries in Kconfig.

  Secure Monitor Call Calling Convention (SMCCC):

   - Update to the latest specification from Arm (v1.2).

   - Allow PSCI code to query the SMCCC version.

  Software Delegated Exception Interface (SDEI):

   - Unexport a bunch of unused symbols.

   - Minor fixes to handling of firmware data.

  Pointer authentication:

   - Add support for dumping the kernel PAC mask in vmcoreinfo so that
     the stack can be unwound by tools such as kdump.

   - Simplification of key initialisation during CPU bringup.

  BPF backend:

   - Improve immediate generation for logical and add/sub instructions.

  vDSO:

   - Minor fixes to the linker flags for consistency with other
     architectures and support for LLVM's unwinder.

   - Clean up logic to initialise and map the vDSO into userspace.

  ACPI:

   - Work around for an ambiguity in the IORT specification relating to
     the "num_ids" field.

   - Support _DMA method for all named components rather than only PCIe
     root complexes.

   - Minor other IORT-related fixes.

  Miscellaneous:

   - Initialise debug traps early for KGDB and fix KDB cacheflushing
     deadlock.

   - Minor tweaks to early boot state (documentation update, set
     TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).

   - Refactoring and cleanup"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
  KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h
  KVM: arm64: Check advertised Stage-2 page size capability
  arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
  ACPI/IORT: Remove the unused __get_pci_rid()
  arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
  arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
  arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
  arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
  arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
  arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
  arm64/cpufeature: Introduce ID_MMFR5 CPU register
  arm64/cpufeature: Introduce ID_DFR1 CPU register
  arm64/cpufeature: Introduce ID_PFR2 CPU register
  arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
  arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
  arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
  arm64: mm: Add asid_gen_match() helper
  firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
  arm64: vdso: Fix CFI directives in sigreturn trampoline
  arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
  ...

Fix a missing prototype warning by adding a forward declaration
for the PE/COFF entrypoint, and while at it, align the function
name between the x86 and ARM versions of the stub.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

For historical reasons, the primary entry routine living somewhere in
the inittext section is called stext(), which is confusing, given that
there is also a section marker called _stext which lives at a fixed
offset in the image (either 64 or 4096 bytes, depending on whether
CONFIG_EFI is enabled)

Let's rename stext to primary_entry(), which is a better description
and reflects the secondary_entry() routine that already exists for
SMP boot.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200326171423.3080-1-ardb@kernel.org
Reviwed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>

Commit 9f9223778 ("efi/libstub/arm: Make efi_entry() an ordinary PE/COFF
entrypoint") modified the handover code written in assembler, and for
maintainability, aligned the logic with the logic used in the 32-bit ARM
version, which is to avoid cache maintenance on the remaining instructions
in the subroutine that will be executed with the MMU and caches off, and
instead, branch into the relocated copy of the kernel image.

However, this assumes that this copy is executable, and this means we
expect EFI_LOADER_DATA regions to be executable as well, which is not
a reasonable assumption to make, even if this is true for most UEFI
implementations today.

So change this back, and add a __clean_dcache_area_poc() call to cover
the remaining code in the subroutine. While at it, switch the other
call site over to __clean_dcache_area_poc() as well, and clean up the
terminology in comments to avoid using 'flush' in the context of cache
maintenance. Also, let's switch to the new style asm annotations.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20200228121408.9075-6-ardb@kernel.org

Expose efi_entry() as the PE/COFF entrypoint directly, instead of
jumping into a wrapper that fiddles with stack buffers and other
stuff that the compiler is much better at. The only reason this
code exists is to obtain a pointer to the base of the image, but
we can get the same value from the loaded_image protocol, which
we already need for other reasons anyway.

Update the return type as well, to make it consistent with what
is required for a PE/COFF executable entrypoint.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>