Handle read-only cases when CONFIG_DEBUG_RODATA (4.0) or
CONFIG_DEBUG_SET_MODULE_RONX (3.18) are enabled by using
aarch64_insn_write() instead of probe_kernel_write() as introduced by
commit 2f896d586610 ("arm64: use fixmap for text patching") in 4.0.

Fixes: 11d91a770f1f ("arm64: Add CONFIG_DEBUG_SET_MODULE_RONX support")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

When debug preempt or preempt tracer is enabled, preempt_count_add/sub()
can be traced by function and function graph tracing, and
preempt_disable/enable() would call preempt_count_add/sub(), so in Ftrace
subsystem we should use preempt_disable/enable_notrace instead.

In the commit 345ddcc882d8 ("ftrace: Have set_ftrace_pid use the bitmap
like events do") the function this_cpu_read() was added to
trace_graph_entry(), and if this_cpu_read() calls preempt_disable(), graph
tracer will go into a recursive loop, even if the tracing_on is
disabled.

So this patch change to use preempt_enable/disable_notrace instead in
this_cpu_read().

Since Yonghui Yang helped a lot to find the root cause of this problem,
so also add his SOB.

Signed-off-by: Yonghui Yang <mark.yang@spreadtrum.com>
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

smp_mb__before_spinlock() is intended to upgrade a spin_lock() operation
to a full barrier, such that prior stores are ordered with respect to
loads and stores occuring inside the critical section.

Unfortunately, the core code defines the barrier as smp_wmb(), which
is insufficient to provide the required ordering guarantees when used in
conjunction with our load-acquire-based spinlock implementation.

This patch overrides the arm64 definition of smp_mb__before_spinlock()
to map to a full smp_mb().

Cc: <stable@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull arm64 fixes from Catalin Marinas:

 - support for nr_cpus= command line argument (maxcpus was previously
   changed to allow secondary CPUs to be hot-plugged)

 - ARM PMU interrupt handling fix

 - fix potential TLB conflict in the hibernate code

 - improved handling of EL1 instruction aborts (better error reporting)

 - removal of useless jprobes code for stack saving/restoring

 - defconfig updates

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: defconfig: enable CONFIG_LOCALVERSION_AUTO
  arm64: defconfig: add options for virtualization and containers
  arm64: hibernate: handle allocation failures
  arm64: hibernate: avoid potential TLB conflict
  arm64: Handle el1 synchronous instruction aborts cleanly
  arm64: Remove stack duplicating code from jprobes
  drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" property
  drivers/perf: arm-pmu: convert arm_pmu_mutex to spinlock
  arm64: Support hard limit of cpu count by nr_cpus

Because the arm64 calling standard allows stacked function arguments to be
anywhere in the stack frame, do not attempt to duplicate the stack frame for
jprobes handler functions.

Documentation changes to describe this issue have been broken out into a
separate patch in order to simultaneously address them in other
architecture(s).

Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull usercopy protection from Kees Cook:
 "Tbhis implements HARDENED_USERCOPY verification of copy_to_user and
  copy_from_user bounds checking for most architectures on SLAB and
  SLUB"

* tag 'usercopy-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  mm: SLUB hardened usercopy support
  mm: SLAB hardened usercopy support
  s390/uaccess: Enable hardened usercopy
  sparc/uaccess: Enable hardened usercopy
  powerpc/uaccess: Enable hardened usercopy
  ia64/uaccess: Enable hardened usercopy
  arm64/uaccess: Enable hardened usercopy
  ARM: uaccess: Enable hardened usercopy
  x86/uaccess: Enable hardened usercopy
  mm: Hardened usercopy
  mm: Implement stack frame object validation
  mm: Add is_migrate_cma_page

Pull arm64 fixes from Will Deacon:

 - fix HugeTLB leak due to CoW and PTE_RDONLY mismatch

 - avoid accessing unmapped FDT fields when checking validity

 - correctly account for vDSO AUX entry in ARCH_DLINFO

 - fix kallsyms with absolute expressions in linker script

 - kill unnecessary symbol-based relocs in vmlinux

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix copy-on-write referencing in HugeTLB
  arm64: mm: avoid fdt_check_header() before the FDT is fully mapped
  arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
  arm64: relocatable: suppress R_AARCH64_ABS64 relocations in vmlinux
  arm64: vmlinux.lds: make __rela_offset and __dynsym_offset ABSOLUTE

set_pte_at(.) will set or unset the PTE_RDONLY hardware bit before
writing the entry to the table.

This can cause problems with the copy-on-write logic in hugetlb_cow:
 *) hugetlb_cow(.) called to handle a write fault on read only pte,
 *) Before the copy-on-write updates the new page table a call is
    made to pte_same(huge_ptep_get(ptep), pte)), to check for a race,
 *) Because set_pte_at(.) changed the pte, *ptep != pte, and the
    hugetlb_cow(.) code erroneously assumes that it lost the race,
 *) The new page is subsequently freed without being used.

On arm64 this problem only becomes apparent when we apply:
67961f9 mm/hugetlb: fix huge page reserve accounting for private
mappings

When one runs the libhugetlbfs test suite, there are allocation errors
and hugetlbfs pages become erroneously locked in memory as reserved.
(There is a high HugePages_Rsvd: count).

In this patch we introduce pte_same which ignores the PTE_RDONLY bit,
allowing for the libhugetlbfs test suite to pass as expected and
without leaking any reserved HugeTLB pages.

Reported-by: Huang Shijie <shijie.huang@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Pull KVM updates from Paolo Bonzini:

 - ARM: GICv3 ITS emulation and various fixes.  Removal of the
   old VGIC implementation.

 - s390: support for trapping software breakpoints, nested
   virtualization (vSIE), the STHYI opcode, initial extensions
   for CPU model support.

 - MIPS: support for MIPS64 hosts (32-bit guests only) and lots
   of cleanups, preliminary to this and the upcoming support for
   hardware virtualization extensions.

 - x86: support for execute-only mappings in nested EPT; reduced
   vmexit latency for TSC deadline timer (by about 30%) on Intel
   hosts; support for more than 255 vCPUs.

 - PPC: bugfixes.

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits)
  KVM: PPC: Introduce KVM_CAP_PPC_HTM
  MIPS: Select HAVE_KVM for MIPS64_R{2,6}
  MIPS: KVM: Reset CP0_PageMask during host TLB flush
  MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX()
  MIPS: KVM: Sign extend MFC0/RDHWR results
  MIPS: KVM: Fix 64-bit big endian dynamic translation
  MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase
  MIPS: KVM: Use 64-bit CP0_EBase when appropriate
  MIPS: KVM: Set CP0_Status.KX on MIPS64
  MIPS: KVM: Make entry code MIPS64 friendly
  MIPS: KVM: Use kmap instead of CKSEG0ADDR()
  MIPS: KVM: Use virt_to_phys() to get commpage PFN
  MIPS: Fix definition of KSEGX() for 64-bit
  KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD
  kvm: x86: nVMX: maintain internal copy of current VMCS
  KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE
  KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures
  KVM: arm64: vgic-its: Simplify MAPI error handling
  KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers
  KVM: arm64: vgic-its: Turn device_id validation into generic ID validation
  ...

Pull 64-bit ARM SoC updates from Olof Johansson:
 "Changes to platform code for 64-bit ARM platforms.

  Nearly all of these are defconfig updates to enable new drivers or old
  drivers still used on these 64-bit platforms.

  Added platforms for this release are:

   - Broadcom BCM2837
   - Renesas R8A7796"

* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
  arm64: remove duplicate PWM entry in defconfig
  arm64: Update default configuration
  arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433
  arm64: amlogic: select gxbb clk driver
  arm64: defconfig: Enable S2MPS11 clock and S3C RTC driver
  arm64: marvell: enable Armada 3700 clock drivers
  arm64: defconfig: enable msm8996 pinctrl support
  arm64: defconfig: Enable qcom msm8996 clk drivers
  arm: defconfig: Enable PM8941 pwr key
  arm64: defconfig: enable stmmac and realtek PHY as modules
  arm64: Kconfig: select PM{,_GENERIC_DOMAINS} for ARCH_VEXPRESS
  arm64: defconfig: enable SENSORS_ARM_SCPI
  arm64: defconfig: enable Generic on-chip SRAM driver
  arm64: configs: enable PCIe driver for Armada 7K/8K
  arm64: Add platform selection for BCM2835.
  arm64: defconfig: disable plain NEON implementation of AES
  arm64: Allow for different DMA and CPU bus offsets
  arm64: defconfig: enable Renesas R8A7796 SoC
  arm64: defconfig: Enable Cadence MACB/GEM support
  ARM64: Kconfig: Select the Amlogic Meson pin controller driver
  ...