linux-stable.git/arch/arm64/boot, branch v4.8 Linux kernel stable tree Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2016-09-16T19:15:41+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-09-16T19:15:41+00:00 008f08d64a74a71a4ea99533d0520d804048a4a0 Pull ARM SoC fixes from Arnd Bergmann: "Here are a couple of bugfixes for v4.8-rc. Most of them have actually been around for a while this time but for some reason didn't get applied early on. The shmobile regulator fix is the only one that isn't completely obvious. Device tree changes: - archtimer interrupts must be level triggered (multiple platforms) - fix for USB and MMC clocks on STiH410 - fix split DT repository in case of raspberry-pi 3 - a new use of skeleton.dtsi on arm64 has crept in after that was removed. defconfig updates: - xilinx vdma has a new Kconfig symbol name - keystone requires CONFIG_NOP_USB_XCEIV since v4.8-rc1 Code fixes: - fix regulator quirk on shmobile - suspend-to-ram regression on EXYNOS Maintainer updates: - Javier Martinez Canillas is now a reviewer for Samsung EXYNOS" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: keystone: defconfig: Fix USB configuration arm64: dts: Fix broken architected timer interrupt trigger ARM: multi_v7_defconfig: update XILINX_VDMA ARM64: dts: bcm: Use a symlink to R-Pi dtsi files from arch=arm ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCI ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB) ARM: shmobile: fix regulator quirk for Gen2 ARM: EXYNOS: Clear OF_POPULATED flag from PMU node in IRQ init callback MAINTAINERS: Add myself as reviewer for Samsung Exynos support 
Pull ARM SoC fixes from Arnd Bergmann:
 "Here are a couple of bugfixes for v4.8-rc.

  Most of them have actually been around for a while this time but for
  some reason didn't get applied early on.  The shmobile regulator fix
  is the only one that isn't completely obvious.

  Device tree changes:
   - archtimer interrupts must be level triggered (multiple platforms)
   - fix for USB and MMC clocks on STiH410
   - fix split DT repository in case of raspberry-pi 3
   - a new use of skeleton.dtsi on arm64 has crept in after that was
     removed.

  defconfig updates:
   - xilinx vdma has a new Kconfig symbol name
   - keystone requires CONFIG_NOP_USB_XCEIV since v4.8-rc1

  Code fixes:
   - fix regulator quirk on shmobile
   - suspend-to-ram regression on EXYNOS

  Maintainer updates:
   - Javier Martinez Canillas is now a reviewer for Samsung EXYNOS"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: keystone: defconfig: Fix USB configuration
  arm64: dts: Fix broken architected timer interrupt trigger
  ARM: multi_v7_defconfig: update XILINX_VDMA
  ARM64: dts: bcm: Use a symlink to R-Pi dtsi files from arch=arm
  ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi
  ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCI
  ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB)
  ARM: shmobile: fix regulator quirk for Gen2
  ARM: EXYNOS: Clear OF_POPULATED flag from PMU node in IRQ init callback
  MAINTAINERS: Add myself as reviewer for Samsung Exynos support
Merge branch 'dt/irq-fix' into fixes 2016-09-14T20:47:36+00:00 Arnd Bergmann arnd@arndb.de 2016-09-14T20:47:36+00:00 d20ced23c7a019a9ca6fe69d6d1907bfd8c1a255 * dt/irq-fix: arm64: dts: Fix broken architected timer interrupt trigger 
* dt/irq-fix:
  arm64: dts: Fix broken architected timer interrupt trigger
arm64: dts: Fix broken architected timer interrupt trigger 2016-09-14T20:47:22+00:00 Marc Zyngier marc.zyngier@arm.com 2016-08-01T09:54:16+00:00 f2a89d3b2b85b90b05453872aaabfdb412a21a03 The ARM architected timer specification mandates that the interrupt associated with each timer is level triggered (which corresponds to the "counter >= comparator" condition). A number of DTs are being remarkably creative, declaring the interrupt to be edge triggered. A quick look at the TRM for the corresponding ARM CPUs clearly shows that this is wrong, and I've corrected those. For non-ARM designs (and in the absence of a publicly available TRM), I've made them active low as well, which can't be completely wrong as the GIC cannot disinguish between level low and level high. The respective maintainers are of course welcome to prove me wrong. While I was at it, I took the liberty to fix a couple of related issue, such as some spurious affinity bits on ThunderX, and their complete absence on ls1043a (both of which seem to be related to copy-pasting from other DTs). Acked-by: Duc Dang <dhdang@apm.com> Acked-by: Carlo Caione <carlo@endlessm.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
The ARM architected timer specification mandates that the interrupt
associated with each timer is level triggered (which corresponds to
the "counter >= comparator" condition).

A number of DTs are being remarkably creative, declaring the interrupt
to be edge triggered. A quick look at the TRM for the corresponding ARM
CPUs clearly shows that this is wrong, and I've corrected those.
For non-ARM designs (and in the absence of a publicly available TRM),
I've made them active low as well, which can't be completely wrong
as the GIC cannot disinguish between level low and level high.

The respective maintainers are of course welcome to prove me wrong.

While I was at it, I took the liberty to fix a couple of related issue,
such as some spurious affinity bits on ThunderX, and their complete
absence on ls1043a (both of which seem to be related to copy-pasting
from other DTs).

Acked-by: Duc Dang <dhdang@apm.com>
Acked-by: Carlo Caione <carlo@endlessm.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM64: dts: bcm: Use a symlink to R-Pi dtsi files from arch=arm 2016-09-09T15:47:16+00:00 Ian Campbell ijc@hellion.org.uk 2016-08-03T14:12:45+00:00 76aa7591688001839ec9ca838041f2d55d49ab92 The ../../../arm... style cross-references added by commit 9d56c22a7861 ("ARM: bcm2835: Add devicetree for the Raspberry Pi 3.") do not work in the context of the split device-tree repository[0] (where the directory structure differs). As with commit 8ee57b8182c4 ("ARM64: dts: vexpress: Use a symlink to vexpress-v2m-rs1.dtsi from arch=arm") use symlinks instead. [0] https://git.kernel.org/cgit/linux/kernel/git/devicetree/devicetree-rebasing.git/ Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rpi-kernel@lists.infradead.org Cc: arm@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
The ../../../arm... style cross-references added by commit 9d56c22a7861
("ARM: bcm2835: Add devicetree for the Raspberry Pi 3.") do not work in the
context of the split device-tree repository[0] (where the directory
structure differs). As with commit 8ee57b8182c4 ("ARM64: dts: vexpress: Use
a symlink to vexpress-v2m-rs1.dtsi from arch=arm") use symlinks instead.

[0] https://git.kernel.org/cgit/linux/kernel/git/devicetree/devicetree-rebasing.git/

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rpi-kernel@lists.infradead.org
Cc: arm@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: dts: rockchip: add reset saradc node for rk3368 SoCs 2016-08-23T18:08:21+00:00 Caesar Wang wxt@rock-chips.com 2016-07-27T14:24:06+00:00 78ec79bfd59e126e1cb394302bfa531a420b3ecd SARADC controller needs to be reset before programming it, otherwise it will not function properly. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 
SARADC controller needs to be reset before programming it, otherwise
it will not function properly.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2016-08-11T21:14:23+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-08-11T21:14:23+00:00 d3396e1e4ec4aa41ef563841e8ba511ae0589003 Pull ARM SoC fixes from Arnd Bergmann: "A couple of bug fixes have come in for v4.8 so far. Since the first few were originally meant to go into -rc1 (but didn't get sent in time for travel reasons), the branch is unfortunately based on top of a commit in the middle of the merge window rather than -rc1. Content-wise we have: - a fix for the last remaining broken build in kernelci, getting mach-shmobile to build again with SMP disabled - a fix for a realview regression that broke real hardware but not the qemu model that everyone uses in practice (needed for v4.7 as well) - a merge conflict fix for Tegra that also broke v4.7 - two Kconfig fixes for arm64 build regressions - a couple of arm32 build warning fixes (all harmless) - fix the RTC on Exynos7 Espresso (which apparently never worked right)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: Merge tag 'pxa-fixes-v4.8' of https://github.com/rjarzmik/linux into randconfig-4.8 arm64: Kconfig: select HISILICON_IRQ_MBIGEN only if PCI is selected arm64: Kconfig: select ALPINE_MSI only if PCI is selected ARM: dts: realview: Fix PBX-A9 cache description ARM: tegra: fix erroneous address in dts ARM: dts: add syscon compatible string for AP syscon ARM: dts: add syscon compatible string for CP syscon ARM: oxnas: select reset controller framework ARM: hide mach-*/ include for ARM_SINGLE_ARMV7M ARM: don't include removed directories Revert "ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME" ARM: shmobile: don't call platform_can_secondary_boot on UP MAINTAINER: alpine: add a mailing list ARM: do away with final ARCH_REQUIRE_GPIOLIB arm64: dts: Fix RTC by providing rtc_src clock 
Pull ARM SoC fixes from Arnd Bergmann:
 "A couple of bug fixes have come in for v4.8 so far.  Since the first
  few were originally meant to go into -rc1 (but didn't get sent in time
  for travel reasons), the branch is unfortunately based on top of a
  commit in the middle of the merge window rather than -rc1.

  Content-wise we have:

   - a fix for the last remaining broken build in kernelci, getting
     mach-shmobile to build again with SMP disabled

   - a fix for a realview regression that broke real hardware but not
     the qemu model that everyone uses in practice (needed for v4.7 as
     well)

   - a merge conflict fix for Tegra that also broke v4.7

   - two Kconfig fixes for arm64 build regressions

   - a couple of arm32 build warning fixes (all harmless)

   - fix the RTC on Exynos7 Espresso (which apparently never worked
     right)"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  Merge tag 'pxa-fixes-v4.8' of https://github.com/rjarzmik/linux into randconfig-4.8
  arm64: Kconfig: select HISILICON_IRQ_MBIGEN only if PCI is selected
  arm64: Kconfig: select ALPINE_MSI only if PCI is selected
  ARM: dts: realview: Fix PBX-A9 cache description
  ARM: tegra: fix erroneous address in dts
  ARM: dts: add syscon compatible string for AP syscon
  ARM: dts: add syscon compatible string for CP syscon
  ARM: oxnas: select reset controller framework
  ARM: hide mach-*/ include for ARM_SINGLE_ARMV7M
  ARM: don't include removed directories
  Revert "ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME"
  ARM: shmobile: don't call platform_can_secondary_boot on UP
  MAINTAINER: alpine: add a mailing list
  ARM: do away with final ARCH_REQUIRE_GPIOLIB
  arm64: dts: Fix RTC by providing rtc_src clock
Merge tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2016-08-02T21:12:29+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-08-02T21:12:29+00:00 c8d0267efdb4ab16cd0ed6e0218e8c164006de48 Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ... 
Pull PCI updates from Bjorn Helgaas:
 "Highlights:

   - ARM64 support for ACPI host bridges

   - new drivers for Axis ARTPEC-6 and Marvell Aardvark

   - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx

   - pci_resource_to_user() cleanup (more to come)

  Detailed summary:

  Enumeration:
   - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
   - Add parent device field to ECAM struct pci_config_window (Jayachandran C)
   - Add generic MCFG table handling (Tomasz Nowicki)
   - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
   - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)

  Resource management:
   - Add devm_request_pci_bus_resources() (Bjorn Helgaas)
   - Unify pci_resource_to_user() declarations (Bjorn Helgaas)
   - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
   - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
   - Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
   - Ignore write combining when mapping I/O port space (Bjorn Helgaas)
   - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
   - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
   - Support I/O resources when parsing host bridge resources (Jayachandran C)
   - Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
   - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
   - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
   - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
   - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
   - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
   - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
   - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)

  PCI device hotplug:
   - Allow additional bus numbers for hotplug bridges (Keith Busch)
   - Ignore interrupts during D3cold (Lukas Wunner)

  Power management:
   - Enforce type casting for pci_power_t (Andy Shevchenko)
   - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
   - Put PCIe ports into D3 during suspend (Mika Westerberg)
   - Power on bridges before scanning new devices (Mika Westerberg)
   - Runtime resume bridge before rescan (Mika Westerberg)
   - Add runtime PM support for PCIe ports (Mika Westerberg)
   - Remove redundant check of pcie_set_clkpm (Shawn Lin)

  Virtualization:
   - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
   - Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
   - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
   - Add ACS quirk for Solarflare SFC9220 (Edward Cree)

  MSI:
   - Fix PCI_MSI dependencies (Arnd Bergmann)
   - Add pci_msix_desc_addr() helper (Christoph Hellwig)
   - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
   - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
   - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
   - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)

  Error Handling:
   - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
   - Remove DPC tristate module option (Keith Busch)
   - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)

  Generic host bridge driver:
   - Select IRQ_DOMAIN (Arnd Bergmann)
   - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)

  ACPI host bridge driver:
   - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
   - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
   - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
   - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)

  Altera host bridge driver:
   - Check link status before retrain link (Ley Foon Tan)
   - Poll for link up status after retraining the link (Ley Foon Tan)

  Axis ARTPEC-6 host bridge driver:
   - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
   - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
   - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)

  Intel VMD host bridge driver:
   - Use lock save/restore in interrupt enable path (Jon Derrick)
   - Select device dma ops to override (Keith Busch)
   - Initialize list item in IRQ disable (Keith Busch)
   - Use x86_vector_domain as parent domain (Keith Busch)
   - Separate MSI and MSI-X vector sharing (Keith Busch)

  Marvell Aardvark host bridge driver:
   - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
   - Add Aardvark PCI host controller driver (Thomas Petazzoni)
   - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)

  Microsoft Hyper-V host bridge driver:
   - Fix interrupt cleanup path (Cathy Avery)
   - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
   - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)

  NVIDIA Tegra host bridge driver:
   - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
   - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
   - Use lower-case hex consistently for register definitions (Thierry Reding)
   - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
   - Stop setting pcibios_min_mem (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Drop gen2 dummy I/O port region (Bjorn Helgaas)

  TI DRA7xx host bridge driver:
   - Fix return value in case of error (Christophe JAILLET)

  Xilinx AXI host bridge driver:
   - Fix return value in case of error (Christophe JAILLET)

  Miscellaneous:
   - Make bus_attr_resource_alignment static (Ben Dooks)
   - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
   - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
   - Make host bridge drivers explicitly non-modular (Paul Gortmaker)"

* tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits)
  PCI: xgene: Make explicitly non-modular
  PCI: thunder-pem: Make explicitly non-modular
  PCI: thunder-ecam: Make explicitly non-modular
  PCI: tegra: Make explicitly non-modular
  PCI: rcar-gen2: Make explicitly non-modular
  PCI: rcar: Make explicitly non-modular
  PCI: mvebu: Make explicitly non-modular
  PCI: layerscape: Make explicitly non-modular
  PCI: keystone: Make explicitly non-modular
  PCI: hisi: Make explicitly non-modular
  PCI: generic: Make explicitly non-modular
  PCI: designware-plat: Make it explicitly non-modular
  PCI: artpec6: Make explicitly non-modular
  PCI: armada8k: Make explicitly non-modular
  PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency
  PCI: Add ACS quirk for Solarflare SFC9220
  arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700
  PCI: aardvark: Add Aardvark PCI host controller driver
  dt-bindings: add DT binding for the Aardvark PCIe controller
  PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values
  ...
arm64: dts: Fix RTC by providing rtc_src clock 2016-08-02T19:27:11+00:00 Alim Akhtar alim.akhtar@samsung.com 2016-07-11T07:34:18+00:00 1fabaddd153e9e2f7e5695266abb56c934629718 Add RTC source clock as Exynos7 needs source (32.768KHz) clock for RTC block. Without this currently S3C RTC driver probe is broken on this SoC. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Add RTC source clock as Exynos7 needs source (32.768KHz) clock
for RTC block. Without this currently S3C RTC driver probe is broken
on this SoC.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2016-08-01T22:47:01+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-08-01T22:47:01+00:00 ed780686de61ab27e65f1cfedeccd7b45667bd70 Pull 64-bit ARM DT updates from Olof Johansson: "Just as the 32-bit contents, the 64-bit device tree branch also contains a number of additions this release cycle. New platforms: - LG LG1313 - Mediatek MT6755 - Renesas r8a7796 - Broadcom 2837 Other platforms with larger updates are: - Nvidia X1 platforms (USB 3.0, regulators, display subsystem) - Mediatek MT8173 (display subsystem added) - Rockchip RK3399 (a lot of new peripherals) - ARM Juno reference implementation (SCPI power domains, coresight, thermal)" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits) arm64: tegra: Enable HDMI on Jetson TX1 arm64: tegra: Add sor1_src clock arm64: tegra: Add XUSB powergates on Tegra210 arm64: tegra: Add DPAUX pinctrl bindings arm64: tegra: Add ACONNECT bus node for Tegra210 arm64: tegra: Add audio powergate node for Tegra210 arm64: tegra: Add regulators for Tegra210 Smaug arm64: tegra: Correct Tegra210 XUSB mailbox interrupt arm64: tegra: Enable XUSB controller on Jetson TX1 arm64: tegra: Enable debug serial on Jetson TX1 arm64: tegra: Add Tegra210 XUSB controller arm64: tegra: Add Tegra210 XUSB pad controller arm64: tegra: Add DSI panel on Jetson TX1 arm64: tegra: p2597: Add SDMMC power supplies arm64: tegra: Add PMIC support on Jetson TX1 Revert "ARM64: DTS: meson-gxbb: switch ethernet to real clock" arm64: dts: hi6220: Add pl031 RTC support arm64: dts: r8a7796/salvator-x: Enable watchdog timer arm64: dts: r8a7796: Add RWDT node arm64: dts: r8a7796: Use SYSC "always-on" PM Domain ... 
Pull 64-bit ARM DT updates from Olof Johansson:
 "Just as the 32-bit contents, the 64-bit device tree branch also
  contains a number of additions this release cycle.

  New platforms:
   - LG LG1313
   - Mediatek MT6755
   - Renesas r8a7796
   - Broadcom 2837

  Other platforms with larger updates are:
   - Nvidia X1 platforms (USB 3.0, regulators, display subsystem)
   - Mediatek MT8173 (display subsystem added)
   - Rockchip RK3399 (a lot of new peripherals)
   - ARM Juno reference implementation (SCPI power domains, coresight,
     thermal)"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits)
  arm64: tegra: Enable HDMI on Jetson TX1
  arm64: tegra: Add sor1_src clock
  arm64: tegra: Add XUSB powergates on Tegra210
  arm64: tegra: Add DPAUX pinctrl bindings
  arm64: tegra: Add ACONNECT bus node for Tegra210
  arm64: tegra: Add audio powergate node for Tegra210
  arm64: tegra: Add regulators for Tegra210 Smaug
  arm64: tegra: Correct Tegra210 XUSB mailbox interrupt
  arm64: tegra: Enable XUSB controller on Jetson TX1
  arm64: tegra: Enable debug serial on Jetson TX1
  arm64: tegra: Add Tegra210 XUSB controller
  arm64: tegra: Add Tegra210 XUSB pad controller
  arm64: tegra: Add DSI panel on Jetson TX1
  arm64: tegra: p2597: Add SDMMC power supplies
  arm64: tegra: Add PMIC support on Jetson TX1
  Revert "ARM64: DTS: meson-gxbb: switch ethernet to real clock"
  arm64: dts: hi6220: Add pl031 RTC support
  arm64: dts: r8a7796/salvator-x: Enable watchdog timer
  arm64: dts: r8a7796: Add RWDT node
  arm64: dts: r8a7796: Use SYSC "always-on" PM Domain
  ...
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2016-08-01T22:36:01+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-08-01T22:36:01+00:00 43a0a98aa8da71583f84b84fd72e265c24d4c5f8 Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ... 
Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs.

  A slew of changes this release cycle.  The reset driver tree, that we
  merge through arm-soc for historical reasons, is also sizable this
  time around.

  Among the changes:

   - clps711x: Treewide changes to compatible strings, merged here for simplicity.
   - Qualcomm: SCM firmware driver cleanups, move to platform driver
   - ux500: Major cleanups, removal of old mach-specific infrastructure.
   - Atmel external bus memory driver
   - Move of brcmstb platform to the rest of bcm
   - PMC driver updates for tegra, various fixes and improvements
   - Samsung platform driver updates to support 64-bit Exynos platforms
   - Reset controller cleanups moving to devm_reset_controller_register() APIs
   - Reset controller driver for Amlogic Meson
   - Reset controller driver for Hisilicon hi6220
   - ARM SCPI power domain support"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits)
  ARM: ux500: consolidate base platform files
  ARM: ux500: move soc_id driver to drivers/soc
  ARM: ux500: call ux500_setup_id later
  ARM: ux500: consolidate soc_device code in id.c
  ARM: ux500: remove cpu_is_u* helpers
  ARM: ux500: use CLK_OF_DECLARE()
  ARM: ux500: move l2x0 init to .init_irq
  mfd: db8500 stop passing around platform data
  ASoC: ab8500-codec: remove platform data based probe
  ARM: ux500: move ab8500_regulator_plat_data into driver
  ARM: ux500: remove unused regulator data
  soc: raspberrypi-power: add CONFIG_OF dependency
  firmware: scpi: add CONFIG_OF dependency
  video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip
  input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip
  pwm: clps711x: Changing the compatibility string to match with the smallest supported chip
  serial: clps711x: Changing the compatibility string to match with the smallest supported chip
  irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip
  clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip
  clk: clps711x: Changing the compatibility string to match with the smallest supported chip
  ...