linux-stable.git/arch/arm64/boot, branch linux-6.8.y

arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration

2024-05-17T10:15:07+00:00

commit 819fe8c96a5172dfd960e5945e8f00f8fed32953 upstream.

There are two issues with SDHC2 configuration for SA8155P-ADP,
which prevent use of SDHC2 and causes issues with ethernet:

- Card Detect pin for SHDC2 on SA8155P-ADP is connected to gpio4 of
  PMM8155AU_1, not to SoC itself. SoC's gpio4 is used for DWMAC
  TX. If sdhc driver probes after dwmac driver, it reconfigures
  gpio4 and this breaks Ethernet MAC.

- pinctrl configuration mentions gpio96 as CD pin. It seems it was
  copied from some SM8150 example, because as mentioned above,
  correct CD pin is gpio4 on PMM8155AU_1.

This patch fixes both mentioned issues by providing correct pin handle
and pinctrl configuration.

Fixes: 0deb2624e2d0 ("arm64: dts: qcom: sa8155p-adp: Add support for uSD card")
Cc: stable@vger.kernel.org
Signed-off-by: Volodymyr Babchuk 
Reviewed-by: Stephan Gerhold 
Link: https://lore.kernel.org/r/20240412190310.1647893-1-volodymyr_babchuk@epam.com
Signed-off-by: Bjorn Andersson 
Signed-off-by: Greg Kroah-Hartman

arm64: dts: mediatek: mt8183-pico6: Fix bluetooth node

2024-05-17T10:14:51+00:00

[ Upstream commit cd17bcbd2b33d7c816b80640ae2fef2507576278 ]

Bluetooth is not a random device connected to the MMC/SD controller. It
is function 2 of the SDIO device.

Fix the address of the bluetooth node. Also fix the node name and drop
the label.

Fixes: 055ef10ccdd4 ("arm64: dts: mt8183: Add jacuzzi pico/pico6 board")
Signed-off-by: Chen-Yu Tsai 
Reviewed-by: AngeloGioacchino Del Regno 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Sasha Levin

arm64: dts: rockchip: enable internal pull-up for Q7_THRM# on RK3399 Puma

2024-05-02T14:35:28+00:00

commit 0ac417b8f124427c90ec8c2ef4f632b821d924cc upstream.

Q7_THRM# pin is connected to a diode on the module which is used
as a level shifter, and the pin have a pull-down enabled by
default. We need to configure it to internal pull-up, other-
wise whenever the pin is configured as INPUT and we try to
control it externally the value will always remain zero.

Signed-off-by: Iskander Amara 
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Reviewed-by: Quentin Schulz 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240308085243.69903-1-iskander.amara@theobroma-systems.com
Signed-off-by: Heiko Stuebner 
Signed-off-by: Greg Kroah-Hartman

arm64: dts: qcom: sm8450: Fix the msi-map entries

2024-05-02T14:35:28+00:00

commit ecc3ac293ed15ac2536e9fde2810154486f84010 upstream.

While adding the GIC ITS MSI support, it was found that the msi-map entries
needed to be swapped to receive MSIs from the endpoint.

But later it was identified that the swapping was needed due to a bug in
the Qualcomm PCIe controller driver. And since the bug is now fixed with
commit bf79e33cdd89 ("PCI: qcom: Enable BDF to SID translation properly"),
let's fix the msi-map entries also to reflect the actual mapping in the
hardware.

Cc: stable@vger.kernel.org # 6.3: bf79e33cdd89 ("PCI: qcom: Enable BDF to SID translation properly")
Fixes: ff384ab56f16 ("arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam 
Reviewed-by: Neil Armstrong 
Link: https://lore.kernel.org/r/20240318-pci-bdf-sid-fix-v1-1-acca6c5d9cf1@linaro.org
Signed-off-by: Bjorn Andersson 
Signed-off-by: Greg Kroah-Hartman

arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP

2024-05-02T14:35:28+00:00

commit 8b8ec83a1d7d3b6605d9163d2e306971295a4ce8 upstream.

Add the missing PCIe CX performance level votes to avoid relying on
other drivers (e.g. USB or UFS) to maintain the nominal performance
level required for Gen3 speeds.

Fixes: 813e83157001 ("arm64: dts: qcom: sc8280xp/sa8540p: add PCIe2-4 nodes")
Cc: stable@vger.kernel.org      # 6.2
Reviewed-by: Konrad Dybcio 
Reviewed-by: Manivannan Sadhasivam 
Signed-off-by: Johan Hovold 
Link: https://lore.kernel.org/r/20240306095651.4551-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson 
Signed-off-by: Greg Kroah-Hartman

arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller

2024-05-02T14:35:13+00:00

[ Upstream commit ecda8309098402f878c96184f29a1b7ec682d772 ]

The ACPI DSDT of the Surface Pro X (SQ2) specifies the interrupts for
the secondary UBS controller as

    Name (_CRS, ResourceTemplate ()
    {
        Interrupt (ResourceConsumer, Level, ActiveHigh, Shared, ,, )
        {
            0x000000AA,
        }
        Interrupt (ResourceConsumer, Level, ActiveHigh, SharedAndWake, ,, )
        {
            0x000000A7,     // hs_phy_irq: &intc GIC_SPI 136
        }
        Interrupt (ResourceConsumer, Level, ActiveHigh, SharedAndWake, ,, )
        {
            0x00000228,     // ss_phy_irq: &pdc 40
        }
        Interrupt (ResourceConsumer, Edge, ActiveHigh, SharedAndWake, ,, )
        {
            0x0000020A,     // dm_hs_phy_irq: &pdc 10
        }
        Interrupt (ResourceConsumer, Edge, ActiveHigh, SharedAndWake, ,, )
        {
            0x0000020B,     // dp_hs_phy_irq: &pdc 11
        }
    })

Generally, the interrupts above 0x200 map to the PDC interrupts (as used
in the devicetree) as ACPI_NUMBER - 0x200. Note that this lines up with
dm_hs_phy_irq and dp_hs_phy_irq (as well as the interrupts for the
primary USB controller).

Based on the snippet above, ss_phy_irq should therefore be PDC 40 (=
0x28) and not PDC 7. The latter is according to ACPI instead used as
ss_phy_irq for port 0 of the multiport USB controller). Fix this by
setting ss_phy_irq to '&pdc 40'.

Fixes: b080f53a8f44 ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Signed-off-by: Maximilian Luz 
Reviewed-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20240328022224.336938-1-luzmaximilian@gmail.com
Signed-off-by: Bjorn Andersson 
Signed-off-by: Sasha Levin

arm64: dts: qcom: x1e80100: Fix the compatible for cluster idle states

2024-05-02T14:35:13+00:00

[ Upstream commit cb939b9b35426852896790aba2f18f46df34e596 ]

The compatible's for the cluster/domain idle states of x1e80100
are wrong, fix it.

Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Rajendra Nayak 
Reviewed-by: Abel Vesa 
Reviewed-by: Konrad Dybcio 
Link: https://lore.kernel.org/r/20240317132918.1068817-1-quic_rjendra@quicinc.com
Signed-off-by: Bjorn Andersson 
Signed-off-by: Sasha Levin

arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocs

2024-05-02T14:35:13+00:00

[ Upstream commit f011688162ec4c492c12ee7cced74c097270baa2 ]

The code in qcom_q6v5_init() requests the "wdog" IRQ as
IRQF_TRIGGER_RISING. If dt defines the interrupt type as LEVEL_HIGH then
the driver will have issues getting the IRQ again after probe deferral
with an error like:

  irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000!

Fix that by updating the devicetrees to use IRQ_TYPE_EDGE_RISING for
these interrupts, as is already used in most dt's. Also the driver was
already using the interrupts with that type.

Fixes: 3658e411efcb ("arm64: dts: qcom: sc7280: Add ADSP node")
Fixes: df62402e5ff9 ("arm64: dts: qcom: sc7280: Add CDSP node")
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Fixes: 8eb5287e8a42 ("arm64: dts: qcom: sm6350: Add CDSP nodes")
Fixes: efc33c969f23 ("arm64: dts: qcom: sm6350: Add ADSP nodes")
Fixes: fe6fd26aeddf ("arm64: dts: qcom: sm6375: Add ADSP&CDSP")
Fixes: 23a8903785b9 ("arm64: dts: qcom: sm8250: Add remoteprocs")
Signed-off-by: Luca Weiss 
Link: https://lore.kernel.org/r/20240219-remoteproc-irqs-v1-1-c5aeb02334bd@fairphone.com
[bjorn: Added fixes references]
Signed-off-by: Bjorn Andersson 
Signed-off-by: Sasha Levin

arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro

2024-05-02T14:35:13+00:00

[ Upstream commit 433d54818f64a2fe0562f8c04c7a81f562368515 ]

With default dts configuration for BPI-R2Pro, the regulator for sd card is
powered off when reboot is commanded, and the only solution to detect the
sd card again, and therefore, allow rebooting from there, is to do a
hardware reset.

Configure the regulator for sd to be always on for BPI-R2Pro in order to
avoid this issue.

Fixes: f901aaadaa2a ("arm64: dts: rockchip: Add Bananapi R2 Pro")
Signed-off-by: Jose Ignacio Tornos Martinez 
Link: https://lore.kernel.org/r/20240305143222.189413-1-jtornosm@redhat.com
Signed-off-by: Heiko Stuebner 
Signed-off-by: Sasha Levin

arm64: dts: rockchip: mark system power controller and fix typo on orangepi-5-plus

2024-05-02T14:35:13+00:00

[ Upstream commit 08cd20bdecd9cfde5c1aec6146fa22ca753efea1 ]

Mark the PMIC as system power controller, so the board will shut-down
properly and fix the typo on rk806_dvs1_null pins property.

Fixes: 236d225e1ee7 ("arm64: dts: rockchip: Add board device tree for rk3588-orangepi-5-plus")
Signed-off-by: Muhammed Efe Cetin 
Reviewed-by: Dragan Simic 
Link: https://lore.kernel.org/r/20240407173210.372585-1-efectn@6tel.net
Signed-off-by: Heiko Stuebner 
Signed-off-by: Sasha Levin