linux-stable.git/arch/arm64/boot, branch linux-6.11.y

arm64: dts: mediatek: mt8186-corsola-voltorb: Merge speaker codec nodes

2024-12-05T12:54:22+00:00

commit 26ea2459d1724406bf0b342df6b4b1f002d7f8e3 upstream.

The Voltorb device uses a speaker codec different from the original
Corsola device. When the Voltorb device tree was first added, the new
codec was added as a separate node when it should have just replaced the
existing one.

Merge the two nodes. The only differences are the compatible string and
the GPIO line property name. This keeps the device node path for the
speaker codec the same across the MT8186 Chromebook line. Also rename
the related labels and node names from having rt1019p to speaker codec.

Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Chen-Yu Tsai 
Reviewed-by: AngeloGioacchino Del Regno 
Link: https://lore.kernel.org/r/20241018082113.1297268-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno 
Signed-off-by: Greg Kroah-Hartman

arm64: dts: qcom: sc8180x: Add a SoC-specific compatible to cpufreq-hw

2024-12-05T12:53:44+00:00

[ Upstream commit 5df30684415d5a902f23862ab5bbed2a2df7fbf1 ]

Comply with bindings guidelines and get rid of errors such as:

cpufreq@18323000: compatible: 'oneOf' conditional failed, one must be fixed:
        ['qcom,cpufreq-hw'] is too short

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio 
Reviewed-by: Dmitry Baryshkov 
Signed-off-by: Viresh Kumar 
Signed-off-by: Sasha Levin

arm64: dts: rockchip: correct analog audio name on Indiedroid Nova

2024-12-05T12:53:06+00:00

[ Upstream commit 42d85557527266804579bc5d20c101d93f6be3c6 ]

Correct the audio name for the Indiedroid Nova from
rockchip,es8388-codec to rockchip,es8388. This name change corrects a
kernel log error of "ASoC: driver name too long 'rockchip,es8388-codec'
-> 'rockchip_es8388'".

Fixes: 3900160e164b ("arm64: dts: rockchip: Add Indiedroid Nova board")
Signed-off-by: Chris Morgan 
Link: https://lore.kernel.org/r/20241031150505.967909-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner 
Signed-off-by: Sasha Levin

arm64: dts: mediatek: mt8183-kukui-jacuzzi: Add supplies for fixed regulators

2024-12-05T12:53:04+00:00

[ Upstream commit aaecb1da58a72bfbd2c35d4aadc43caa02f11862 ]

When the fixed regulators for the LCD panel and DP bridge were added,
their supplies were not modeled in. These, except for the 1.0V supply,
are just load switches, and need and have a supply.

Add the supplies for each of the fixed regulators.

Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai 
Link: https://lore.kernel.org/r/20241030070224.1006331-4-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno 
Signed-off-by: Sasha Levin

arm64: dts: mediatek: mt8183-kukui-jacuzzi: Fix DP bridge supply names

2024-12-05T12:53:04+00:00

[ Upstream commit c4e8cf13f1740037483565d5b802764e2426515b ]

Some of the regulator supplies for the MIPI-DPI-to-DP bridge and their
associated nodes are incorrectly named. In particular, the 1.0V supply
was modeled as a 1.2V supply.

Fix all the incorrect names, and also fix the voltage of the 1.0V
regulator.

Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai 
Link: https://lore.kernel.org/r/20241030070224.1006331-3-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno 
Signed-off-by: Sasha Levin

arm64: dts: mediatek: mt6358: fix dtbs_check error

2024-12-05T12:53:04+00:00

[ Upstream commit 76ab2ae0ab9ebb2d70e6ee8a9f59911621192c37 ]

Fix DTBS check errors for 'mt6358codec' and 'mt6358regulator':

Error message is:
pmic: 'mt6358codec' and 'mt6358regulator' does not match any of the
regexes: 'pinctrl-[0-9]+'.
Rename these two device node to generic 'audio-codec' and 'regulators'.

Fixes: 9f8872221674 ("arm64: dts: mt6358: add PMIC MT6358 related nodes")
Signed-off-by: Macpaul Lin 
Link: https://lore.kernel.org/r/20241029064647.13370-1-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno 
Signed-off-by: Sasha Levin

arm64: dts: mediatek: Add ADC node on MT6357, MT6358, MT6359 PMICs

2024-12-05T12:53:04+00:00

[ Upstream commit b0a4ce81f327eae06c1088f1a437edc48a94a3e8 ]

Add support for the ADC on MT6357/8/9 and keep it default enabled
as this IP is always present on those PMICs.
Users may use different IIO channels depending on board-specific
routing.

Link: https://lore.kernel.org/r/20240604123008.327424-6-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno 
Stable-dep-of: 76ab2ae0ab9e ("arm64: dts: mediatek: mt6358: fix dtbs_check error")
Signed-off-by: Sasha Levin

arm64: dts: imx8mn-tqma8mqnl-mba8mx-usbot: fix coexistence of output-low and output-high in GPIO

2024-12-05T12:53:04+00:00

[ Upstream commit c771d311b1901cd4679c8fc7f89a882fe07cf4a0 ]

Fix the issue where both 'output-low' and 'output-high' exist under GPIO
hog nodes  (rst_usb_hub_hog and sel_usb_hub_hog) when applying device
tree overlays. Since /delete-property/ is not supported in the overlays,
setting 'output-low' results in both properties being present. The
workaround is to disable these hogs and create new ones with 'output-low'
as needed.

Fix below CHECK_DTBS warning:
arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtb: sel-usb-hub-hog:
   {'output-low': True, 'gpio-hog': True, 'gpios': [[1, 0]], 'output-high': True, 'phandle': 108, '$nodename': ['sel-usb-hub-hog']}
       is valid under each of {'required': ['output-low']}, {'required': ['output-high']

Fixes: 3f6fc30abebc ("arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay")
Signed-off-by: Frank Li 
Reviewed-by: Alexander Stein 
Signed-off-by: Shawn Guo 
Signed-off-by: Sasha Levin

arm64: dts: renesas: hihope: Drop #sound-dai-cells

2024-12-05T12:53:04+00:00

[ Upstream commit 9cc926e3fab42dd292219796cfc94e41f4ab749d ]

"#sound-dai-cells" is required if the board is using "simple-card".
However, the HiHope board uses "audio-graph", thus remove the unneeded
`#sound-dai-cells`.

Commit 9e72606cd2db ("arm64: dts: renesas: #sound-dai-cells is used when
simple-card") updated the comment regarding usage of "#sound-dai-cells"
in the SoC DTSI but missed to remove "#sound-dai-cells" from board DTS
files.

Fixes: 9e72606cd2db ("arm64: dts: renesas: #sound-dai-cells is used when simple-card")
Signed-off-by: Lad Prabhakar 
Reviewed-by: Geert Uytterhoeven 
Acked-by: Kuninori Morimoto 
Link: https://lore.kernel.org/20241010135332.710648-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Sasha Levin

arm64: dts: qcom: x1e80100: Update C4/C5 residency/exit numbers

2024-12-05T12:53:03+00:00

[ Upstream commit 2e65616ef07fa4c72c3898b22e5bede7d468cf32 ]

Update the numbers based on the information found in the DSDT.

Fixes: af16b00578a7 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Konrad Dybcio 
Link: https://lore.kernel.org/r/20240716-topic-h_bits-v1-2-f6c5d3ff982c@linaro.org
Signed-off-by: Bjorn Andersson 
Signed-off-by: Sasha Levin