commit 78ec79bfd59e126e1cb394302bfa531a420b3ecd upstream. SARADC controller needs to be reset before programming it, otherwise it will not function properly. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad1cfdf518976447e6b0d31517bad4e3ebbce6bb upstream.
The 2nd additional region is the GIC virtual cpu interface register
base and size.
As the gic400 of rk3368 says, the cpu interface register map as below
:
-0x0000 GICC_CTRL
.
.
.
-0x00fc GICC_IIDR
-0x1000 GICC_IDR
Obviously, the region size should be greater than 0x1000.
So we should make sure to include the GICC_IDR since the kernel will access
it in some cases.
Fixes: b790c2cab5ca ("arm64: dts: add Rockchip rk3368 core dtsi and board dts for the r88 board")
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[added Fixes and stable-cc]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tree-wide replacement was done by commit 2ef7d5f342c1 (ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus"), but we have some new users of "arm,amba-bus" at Linux 4.7-rc1. Eliminate them now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Olof Johansson <olof@lixom.net>
Pull ARM SoC late DT updates from Arnd Bergmann: "This is a collection of a few late fixes and other misc stuff that had dependencies on things being merged from other trees. The Renesas R-Car power domain handling, and the Nvidia Tegra USB support both hand notable changes that required changing the DT binding in a way that only provides compatibility with old DT blobs on new kernels but not vice versa. As a consequence, the DT changes are based on top of the driver changes and are now in this branch. For NXP i.MX and Samsung Exynos, the changes in here depend on other changes that got merged through the clk maintainer tree" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) ARM: dts: exynos: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3 ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos542x SoC ARM: dts: exynos: Add NoC Probe dt node for Exynos542x SoC ARM: dts: exynos: Add support of bus frequency for exynos4412-trats/odroidu3 ARM: dts: exynos: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3 ARM: dts: exynos: Add support of bus frequency using VDD_INT for exynos3250-rinato ARM: dts: exynos: Add exynos4412-ppmu-common dtsi to delete duplicate PPMU nodes ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4210 ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos4x12 ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4x12 ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos3250 ARM: dts: exynos: Add DMC bus frequency for exynos3250-rinato/monk ARM: dts: exynos: Add DMC bus node for Exynos3250 ARM: tegra: Enable XUSB on Nyan ARM: tegra: Enable XUSB on Jetson TK1 ARM: tegra: Enable XUSB on Venice2 ARM: tegra: Add Tegra124 XUSB controller ARM: tegra: Move Tegra124 to the new XUSB pad controller binding ARM: dts: r8a7794: Use SYSC "always-on" PM Domain ARM: dts: r8a7793: Use SYSC "always-on" PM Domain ...
Pull ARM 64-bit DT updates from Arnd Bergmann:
"We continue ramping up platform support for 64-bit ARM machines, with
111 individual non-merge changesets touching 21 platforms.
The LG1312 platform is completely new and is the first ARM platform by
LG that we support in the mainline kernel. Two other SoCs got added
that are updated versions of existing SoC families, so the port mainly
consists of new dts files:
- The Hisilicon Hip06/D03 is the latest server platform from
Huawei/Hisilicon, and follows the Hip05/D02 platform.
- Rockchip RK3399 follows the 32-bit RK3288 that is popular in
low-end Chromebooks and the 64-bit RK3368 that is mainly found in
chinese Android TV boxes.
The 96Boards HiKey based on the Hisilicon Hi6220 (Kirin 620) gets a
long-awaited overhaul with a lot of devices enabled in the DT, so it
should be much more usable with a mainline kernel now. See also
https://plus.google.com/111524780435806926688/posts/PeGb2VsNhJd
A lot of work went into enabling new device drivers on existing
machines, but we also have a couple of new commercially available
machines:
- Google Pixel C laptop based on Tegra210
- Hardkernel Odroid C2 Based on Amlogic Meson GXBB (S905)
- Geekbuying GeekBox based on Rockchip RK3368
And finally, a couple of reference or development platforms that are
not end-user platforms but are used for trying out the respective SoC
platforms:
- Amlogic Meson GXBB P200 and P201 development systems
- NXP Layerscape 1043A QDS development board
- Hisilicon Hip06 D03 server board, as mentioned above
- LG1312 Reference Design
- RK3399 Evaluation Board"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits)
arm64: dts: marvell: add XOR node for Armada 3700 SoC
dt-bindings: document rockchip rk3399-evb board
arm64: dts: rockchip: add dts file for RK3399 evaluation board
arm64: dts: rockchip: add core dtsi file for RK3399 SoCs
dt-bindings: rockchip-dw-mshc: add description for rk3399
arm64: dts: marvell: Use a SoC-specific compatible for xHCI on Armada37xx
arm64: dts: marvell: Rename armada-37xx USB node
arm64: dts: marvell: Clean up armada-3720-db
Documentation: arm64: Add Hisilicon Hip06 D03 dts binding
arm64: dts: Add initial dts for Hisilicon Hip06 D03 board
arm64: dts: hip05: Add nor flash support
arm64: dts: hip05: fix its node without msi-cells
arm64: dts: r8a7795: Don't disable referenced optional clocks
arm64: dts: salvator-x: populate EXTALR
arm64: dts: r8a7795: enable PCIe on Salvator-X
arm64: dts: r8a7795: Add PCIe nodes
arm64: tegra: Add IOMMU node to GM20B on Tegra210
arm64: tegra: Add reference clock to GM20B on Tegra210
dt-bindings: Add documentation for GM20B GPU
dt-bindings: gk20a: Document iommus property
...
Pull ARM DT updates from Arnd Bergmann:
"These are all the updates to device tree files for 32-bit platforms,
which as usual makes up the bulk of the ARM SoC changes: 462 non-merge
changesets, 450 files changed, 23340 insertions, 5216 deletions.
The three platforms that are added with the "soc" branch are here as
well, and we add some related machine files:
- For Aspeed AST2400/AST2500, we get the evaluation platform and the
Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC
- For Oxnas 810SE, the Western Digital "My Book World Edition" is
added as the only platform at the moment.
- For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7) are
supported
On the ARM Realview development platform, we now support all machines
with device tree, previously only the board files were supported,
which in turn will likely be removed soon.
Qualcomm IPQ4019 is the second generation ARM based "Internet
Processor", following the IPQ806x that is used in many high-end WiFi
routers. This one integrates two ath10k wifi radios that were
previously on separate chips.
Other boards that got added for existing chips are:
Ti OMAP family:
- Amazon Kindle Fire, first generation, tablet and ebook reader
- OnRISC Baltos iR 2110 and 3220 embedded industrial PCs
- TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM
development systems
Samsung EXYNOS platform:
- Samsung ARTIK5 evaluation board, see
https://www.artik.io/modules/overview/artik-5/
NXP i.MX platforms:
- Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx,
TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial
SoM modules
- Embest MarS Board i.MX6Dual DIY platform
- Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and SoloX
Nitrogen6sx embedded boards
- Technexion Pico i.MX6UL compute module
- ZII VF610 Development Board
Marvell embedded (mvebu, orion, kirkwood) platforms:
- Linksys Viper (E4200v2 / EA4500) WiFi router
- Buffalo Kurobox Pro NAS
Qualcomm Snapdragon:
- Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600
Rockchips platform:
- mqmaker MiQi single-board computer
Altera SoCFPGA:
- samtec VIN|ING 1000 vehicle communication interface
Allwinner Sunxi platforms:
- Dserve DSRV9703C tablet
- Difrnce DIT4350 tablet
- Colorfly E708 Q1 tablet
- Polaroid MID2809PXE04 tablet
- Olimex A20 OLinuXino LIME2 single board computer
- Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC single board
computers
Across many platforms, bug fixes went in to address warnings that dtc
now emits with 'make dtbs W=1'. Further changes for device enablement
went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router), Ti
Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid
NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips
rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner
Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM
Versatile Express"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (458 commits)
ARM: dts: tango4: Import watchdog node
ARM: dts: tango4: Update cpus node for cpufreq
ARM: dts: tango4: Update DT to match clk driver
ARM: dts: tango4: Initial thermal support
arm/dst: Add Aspeed ast2500 device tree
arm/dts: Add Aspeed ast2400 device tree
ARM: sun7i: dt: Add pll3 and pll7 clocks
ARM: dts: sunxi: Add a olinuxino-lime2-emmc
ARM: dts: at91: sama5d4: add trng node
ARM: dts: at91: sama5d3: add trng node
ARM: dts: at91: sama5d2: add trng node
ARM: dts: at91: at91sam9g45 family: reduce the trng register map size
ARM: sun4i: dt: Add pll3 and pll7 clocks
ARM: sun5i: chip: Enable the TV Encoder
ARM: sun5i: r8: Add display blocks to the DTSI
ARM: sun5i: a13: Add display and TCON clocks
ARM: dts: ux500: configure the accelerometers open drain
ARM: mx5: dts: Enable USB OTG on M53EVK
ARM: dts: imx6ul-14x14-evk: Add audio support
ARM: dts: imx6qdl: Remove unneeded unit-addresses
...
Pull networking updates from David Miller:
"Highlights:
1) Support SPI based w5100 devices, from Akinobu Mita.
2) Partial Segmentation Offload, from Alexander Duyck.
3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.
4) Allow cls_flower stats offload, from Amir Vadai.
5) Implement bpf blinding, from Daniel Borkmann.
6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
actually using FASYNC these atomics are superfluous. From Eric
Dumazet.
7) Run TCP more preemptibly, also from Eric Dumazet.
8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
driver, from Gal Pressman.
9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.
10) Improve BPF usage documentation, from Jesper Dangaard Brouer.
11) Support tunneling offloads in qed, from Manish Chopra.
12) aRFS offloading in mlx5e, from Maor Gottlieb.
13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
Leitner.
14) Add MSG_EOR support to TCP, this allows controlling packet
coalescing on application record boundaries for more accurate
socket timestamp sampling. From Martin KaFai Lau.
15) Fix alignment of 64-bit netlink attributes across the board, from
Nicolas Dichtel.
16) Per-vlan stats in bridging, from Nikolay Aleksandrov.
17) Several conversions of drivers to ethtool ksettings, from Philippe
Reynes.
18) Checksum neutral ILA in ipv6, from Tom Herbert.
19) Factorize all of the various marvell dsa drivers into one, from
Vivien Didelot
20) Add VF support to qed driver, from Yuval Mintz"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
Revert "phy dp83867: Make rgmii parameters optional"
r8169: default to 64-bit DMA on recent PCIe chips
phy dp83867: Make rgmii parameters optional
phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
bpf: arm64: remove callee-save registers use for tmp registers
asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
switchdev: pass pointer to fib_info instead of copy
net_sched: close another race condition in tcf_mirred_release()
tipc: fix nametable publication field in nl compat
drivers: net: Don't print unpopulated net_device name
qed: add support for dcbx.
ravb: Add missing free_irq() calls to ravb_close()
qed: Remove a stray tab
net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
net: ethernet: fec-mpc52xx: use phydev from struct net_device
bpf, doc: fix typo on bpf_asm descriptions
stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
net: ethernet: fs-enet: use phydev from struct net_device
...
Pull arm64 perf updates from Will Deacon: "The main addition here is support for Broadcom's Vulcan core using the architected ID registers for discovering supported events. - Support for the PMU in Broadcom's Vulcan CPU - Dynamic event detection using the PMCEIDn_EL0 ID registers" * tag 'arm64-perf' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: perf: don't expose CHAIN event in sysfs arm64/perf: Add Broadcom Vulcan PMU support arm64/perf: Filter common events based on PMCEIDn_EL0 arm64/perf: Access pmu register using <read/write>_sys_reg arm64/perf: Define complete ARMv8 recommended implementation defined events arm64/perf: Changed events naming as per the ARM ARM arm64: dts: Add Broadcom Vulcan PMU in dts Documentation: arm64: pmu: Add Broadcom Vulcan PMU binding
Merge "The Freescale/NXP arm64 device tree updates for 4.7" from Shawn Guo: - New board support of LS1043a-QDS from Freescale/NXP - Add new compatible for LS1043A and LS2080A GPIO devices - Update device tree bindings and sources for LS2080A fsl-mc device - Update QSPI and DSPI support on LS1043A and LS2080A * tag 'imx-dt64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: ls2080a: fsl-mc dt node updates Documentation: fsl-mc: binding updates for MSIs, ranges, PHYs arm64: dts: ls1043a: add the DTS node for QSPI support Documentation: fsl-quadspi: Add fsl,ls1043a-qspi compatible string arm64: dts: ls2080a: Add compatible "fsl,ls2080a-gpio" for ls2080a gpio nodes arm64: dts: ls1043a: Add compatible "fsl,qoriq-gpio" for ls1043a gpio nodes arm64: dts: ls2080a: update the DTS for QSPI and DSPI support Documentation: fsl: dspi: Add fsl,ls2080a-dspi compatible string arm64: dts: ls1043a-rdb: add the DTS for DSPI support arm64: dts: add LS1043a-QDS board support Documentation: DT: Add entry for Freescale LS1043a-QDS board
Merge "ARM: mediatek: dts64 updates for v4.7" from Matthias Brugger: - add thermal and auxadc device nodes to mt8173 - add thermal zone nodes to mt8173 * tag 'v4.6-next-dts64' of https://github.com/mbgg/linux-mediatek: arm64: dts: mt8173: Add thermal zone node. ARM64: dts: mt8173: Add thermal/auxadc device nodes