The keyboard driver for GPIO buttons(gpio-keys) checks for one of the
two boolean properties to enable gpio buttons as wakeup source:
1. "wakeup-source" or
2. the legacy "gpio-key,wakeup"

However juno, ste-snowball and emev2-kzm9d dts file have a undetected
"wakeup" property to indictate the wakeup source.

This patch fixes it by making use of "wakeup-source" property.

Cc: Magnus Damm <magnus.damm@gmail.com>
Acked-by: Simon Horman <horms@verge.net.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

The idle-states bindings mandate that the entry-method string
in the idle-states node must be "psci" for ARM v8 64-bit systems,
but the examples in the bindings report a wrong entry-method string.
Owing to this typo, some dts in the kernel wrongly defined the
entry-method property, since they likely cut and pasted the example
definition without paying attention to the bindings definitions.

This patch fixes the typo in the DT idle states bindings examples and
respective dts in the kernel so that the bindings and related dts
files are made compliant.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Howard Chen <howard.chen@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull arm64 updates from Will Deacon:

 - Support for new architectural features introduced in ARMv8.1:
   * Privileged Access Never (PAN) to catch user pointer dereferences in
     the kernel
   * Large System Extension (LSE) for building scalable atomics and locks
     (depends on locking/arch-atomic from tip, which is included here)
   * Hardware Dirty Bit Management (DBM) for updating clean PTEs
     automatically

 - Move our PSCI implementation out into drivers/firmware/, where it can
   be shared with arch/arm/. RMK has also pulled this component branch
   and has additional patches moving arch/arm/ over. MAINTAINERS is
   updated accordingly.

 - Better BUG implementation based on the BRK instruction for trapping

 - Leaf TLB invalidation for unmapping user pages

 - Support for PROBE_ONLY PCI configurations

 - Various cleanups and non-critical fixes, including:
   * Always flush FP/SIMD state over exec()
   * Restrict memblock additions based on range of linear mapping
   * Ensure *(LIST_POISON) generates a fatal fault
   * Context-tracking syscall return no longer corrupts return value when
     not forced on.
   * Alternatives patching synchronisation/stability improvements
   * Signed sub-word cmpxchg compare fix (tickled by HAVE_CMPXCHG_LOCAL)
   * Force SMP=y
   * Hide direct DCC access from userspace
   * Fix EFI stub memory allocation when DRAM starts at 0x0

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits)
  arm64: flush FP/SIMD state correctly after execve()
  arm64: makefile: fix perf_callchain.o kconfig dependency
  arm64: set MAX_MEMBLOCK_ADDR according to linear region size
  of/fdt: make memblock maximum physical address arch configurable
  arm64: Fix source code file path in comments
  arm64: entry: always restore x0 from the stack on syscall return
  arm64: mdscr_el1: avoid exposing DCC to userspace
  arm64: kconfig: Move LIST_POISON to a safe value
  arm64: Add __exception_irq_entry definition for function graph
  arm64: mm: ensure patched kernel text is fetched from PoU
  arm64: alternatives: ensure secondary CPUs execute ISB after patching
  arm64: make ll/sc __cmpxchg_case_##name asm consistent
  arm64: dma-mapping: Simplify pgprot handling
  arm64: restore cpu suspend/resume functionality
  ARM64: PCI: do not enable resources on PROBE_ONLY systems
  arm64: cmpxchg: truncate sub-word signed types before comparison
  arm64: alternative: put secondary CPUs into polling loop during patch
  arm64/Documentation: clarify wording regarding memory below the Image
  arm64: lse: fix lse cmpxchg code indentation
  arm64: remove redundant object file list
  ...

Pull ARM SoC 64-bit changes from Olof Johansson:
 "Here's our branch of ARM64 contents for this merge window.

  Most of this is DT contents for new SoCs (or those who have seen new
  device support added).  Maybe we should stop separating out the arm64
  contents here to avoid the kind of internal conflicts as we got this
  time around, where 32- and 64-bit contents conflicted.

  Anyhow, on the actual contents:

  New SoCs:

   - Broadcom North Star 2 (ns2)
   - Marvell Berlin4CT
   - Mediatek MT6795
   - Rockchip RK3368

  In addition, there are enhancements for the following platforms:

   - Mediatek MT8173: cpuidle-dt updates, misc other additions
   - ZyncMP: A bunch of devices added to the existing DTSI
   - Qualcomm MSM8916 and APQ8016 updates for USB, etc.

  + a handful of other updates for various platforms"

* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (47 commits)
  ARM64: dts: vexpress: Use assigned-clock-parents for sp810
  ARM64: dts: mt6795: enable basic SMP bringup for MT6795
  arm64: Enable Marvell Berlin SoC family in defconfig
  arm64: Enable Marvell Berlin SoC family in Kconfig
  arm64: dts: Add dts files for Marvell Berlin4CT SoC
  ARM64: zynqmp: Move SPI nodes to the right location
  ARM64: zynqmp: Move uart and ttcs to the right location
  ARM64: zynqmp: Enable spi flashes on ep108
  ARM64: zynqmp: Add eeprom memories on i2c bus
  ARM64: zynqmp: Enable sdhci on ep108
  ARM64: zynqmp: Enable watchdog on ep108
  ARM64: zynqmp: Add DWC3 usb support
  ARM64: zynqmp: Add SMMU support
  ARM64: zynqmp: Add CANs node for platform
  ARM64: zynqmp: Use zynqmp specific compatible string for gpio
  devicetree: xilinx: zynqmp: add sata node
  PCI: iproc: Fix BCMA dependency in Kconfig
  arm64: dts: Add Broadcom North Star 2 support
  arm64: Add Broadcom iProc family support
  PCI: iproc: Fix ARM64 dependency in Kconfig
  ...

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v4.3 merge window:

  Enumeration:
   - Allocate ATS struct during enumeration (Bjorn Helgaas)
   - Embed ATS info directly into struct pci_dev (Bjorn Helgaas)
   - Reduce size of ATS structure elements (Bjorn Helgaas)
   - Stop caching ATS Invalidate Queue Depth (Bjorn Helgaas)
   - iommu/vt-d: Cache PCI ATS state and Invalidate Queue Depth (Bjorn Helgaas)
   - Move MPS configuration check to pci_configure_device() (Bjorn Helgaas)
   - Set MPS to match upstream bridge (Keith Busch)
   - ARM/PCI: Set MPS before pci_bus_add_devices() (Murali Karicheri)
   - Add pci_scan_root_bus_msi() (Lorenzo Pieralisi)
   - ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() (Lorenzo Pieralisi)

  Resource management:
   - Call pci_read_bridge_bases() from core instead of arch code (Lorenzo Pieralisi)

  PCI device hotplug:
   - pciehp: Remove unused interrupt events (Bjorn Helgaas)
   - pciehp: Remove ignored MRL sensor interrupt events (Bjorn Helgaas)
   - pciehp: Handle invalid data when reading from non-existent devices (Jarod Wilson)
   - pciehp: Simplify pcie_poll_cmd() (Yijing Wang)
   - Use "slot" and "pci_slot" for struct hotplug_slot and struct pci_slot (Yijing Wang)
   - Protect pci_bus->slots with pci_slot_mutex, not pci_bus_sem (Yijing Wang)
   - Hold pci_slot_mutex while searching bus->slots list (Yijing Wang)

  Power management:
   - Disable async suspend/resume for JMicron multi-function SATA/AHCI (Zhang Rui)

  Virtualization:
   - Add ACS quirks for Intel I219-LM/V (Alex Williamson)
   - Restore ACS configuration as part of pci_restore_state() (Alexander Duyck)

  MSI:
   - Add pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu)
   - x86: Implement pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu)
   - Add helpers to manage pci_dev->irq and pci_dev->irq_managed (Jiang Liu)
   - Free legacy IRQ when enabling MSI/MSI-X (Jiang Liu)
   - ARM/PCI: Remove msi_controller from struct pci_sys_data (Lorenzo Pieralisi)
   - Remove unused pcibios_msi_controller() hook (Lorenzo Pieralisi)

  Generic host bridge driver:
   - Remove dependency on ARM-specific struct hw_pci (Jayachandran C)
   - Build setup-irq.o for arm64 (Jayachandran C)
   - Add arm64 support (Jayachandran C)

  APM X-Gene host bridge driver:
   - Add APM X-Gene PCIe 64-bit prefetchable window (Duc Dang)
   - Add support for a 64-bit prefetchable memory window (Duc Dang)
   - Drop owner assignment from platform_driver (Krzysztof Kozlowski)

  Broadcom iProc host bridge driver:
   - Allow BCMA bus driver to be built as module (Hauke Mehrtens)
   - Delete unnecessary checks before phy calls (Markus Elfring)
   - Add arm64 support (Ray Jui)

  Synopsys DesignWare host bridge driver:
   - Don't complain missing *config* reg space if va_cfg0 is set (Murali Karicheri)

  TI DRA7xx host bridge driver:
   - Disable pm_runtime on get_sync failure (Kishon Vijay Abraham I)
   - Add PM support (Kishon Vijay Abraham I)
   - Clear MSE bit during suspend so clocks will idle (Kishon Vijay Abraham I)
   - Add support to make GPIO drive PERST# line (Kishon Vijay Abraham I)

  Xilinx AXI host bridge driver:
   - Check for MSI interrupt flag before handling as INTx (Russell Joyce)

  Miscellaneous:
   - Fix Intersil/Techwell TW686[4589] AV capture class code (Krzysztof Hałasa)
   - Use PCI_CLASS_SERIAL_USB instead of bare number (Bjorn Helgaas)
   - Fix generic NCR 53c810 class code quirk (Bjorn Helgaas)
   - Fix TI816X class code quirk (Bjorn Helgaas)
   - Remove unused "pci_probe" flags (Bjorn Helgaas)
   - Host bridge driver code simplifications (Fabio Estevam)
   - Add dev_flags bit to access VPD through function 0 (Mark Rustad)
   - Add VPD function 0 quirk for Intel Ethernet devices (Mark Rustad)
   - Kill off set_irq_flags() usage (Rob Herring)
   - Remove Intel Cherrytrail D3 delays (Srinidhi Kasagar)
   - Clean up pci_find_capability() (Wei Yang)"

* tag 'pci-v4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (72 commits)
  PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI
  PCI: Set MPS to match upstream bridge
  PCI: Move MPS configuration check to pci_configure_device()
  PCI: Drop references acquired by of_parse_phandle()
  PCI/MSI: Remove unused pcibios_msi_controller() hook
  ARM/PCI: Remove msi_controller from struct pci_sys_data
  ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi()
  PCI: Add pci_scan_root_bus_msi()
  ARM/PCI: Replace panic with WARN messages on failures
  PCI: generic: Add arm64 support
  PCI: Build setup-irq.o for arm64
  PCI: generic: Remove dependency on ARM-specific struct hw_pci
  PCI: imx6: Simplify a trivial if-return sequence
  PCI: spear: Use BUG_ON() instead of condition followed by BUG()
  PCI: dra7xx: Remove unneeded use of IS_ERR_VALUE()
  PCI: Remove pci_ats_enabled()
  PCI: Stop caching ATS Invalidate Queue Depth
  PCI: Move ATS declarations to linux/pci.h so they're all together
  PCI: Clean up ATS error handling
  PCI: Use pci_physfn() rather than looking up physfn by hand
  ...

The sp810 clk driver is calling the clk consumer APIs from
clk_prepare ops to change the parent to a 1 MHz fixed rate clock
for each of the clocks that the driver provides. Use
assigned-clock-parents for this instead of doing it in the driver
to avoid using the consumer API in provider code. This also
allows us to remove the usage of clk provider APIs that take a
struct clk as an argument from the sp810 driver.

Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Initial support for Marvell Berlin4CT ARM64 SoC

* tag 'berlin64-for-v4.3-1' of git://git.infradead.org/users/hesselba/linux-berlin:
  arm64: dts: Add dts files for Marvell Berlin4CT SoC

Signed-off-by: Olof Johansson <olof@lixom.net>

Add SMP support for mt6795 SoC.

* tag 'v4.2-next-arm64-2' of https://github.com/mbgg/linux-mediatek:
  ARM64: dts: mt6795: enable basic SMP bringup for MT6795

Signed-off-by: Olof Johansson <olof@lixom.net>

This patch adds support SMP on MediaTek MT6795 Cortex-A53 Octa-core SoC.

Signed-off-by: Scott Shu <scott.shu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

arm: Xilinx ZynqMP dt patches for v4.3

- Add SATA, GPIO, CAN, SMMU, USB, SPI, I2C, watchdog and sdhci for zynqmp
- Sort nodes in dtsi

* tag 'zynqmp-dt-for-4.3' of https://github.com/Xilinx/linux-xlnx:
  ARM64: zynqmp: Move SPI nodes to the right location
  ARM64: zynqmp: Move uart and ttcs to the right location
  ARM64: zynqmp: Enable spi flashes on ep108
  ARM64: zynqmp: Add eeprom memories on i2c bus
  ARM64: zynqmp: Enable sdhci on ep108
  ARM64: zynqmp: Enable watchdog on ep108
  ARM64: zynqmp: Add DWC3 usb support
  ARM64: zynqmp: Add SMMU support
  ARM64: zynqmp: Add CANs node for platform
  ARM64: zynqmp: Use zynqmp specific compatible string for gpio
  devicetree: xilinx: zynqmp: add sata node

Signed-off-by: Olof Johansson <olof@lixom.net>