<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/arch/arm/kernel, branch linux-3.10.y</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>ARM: 8634/1: hw_breakpoint: blacklist Scorpion CPUs</title>
<updated>2017-06-20T12:04:08+00:00</updated>
<author>
<name>Mark Rutland</name>
<email>mark.rutland@arm.com</email>
</author>
<published>2017-01-06T12:12:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=d6797dd0b0e7f2d8a828617b8c6f9c66d72b9386'/>
<id>d6797dd0b0e7f2d8a828617b8c6f9c66d72b9386</id>
<content type='text'>
commit ddc37832a1349f474c4532de381498020ed71d31 upstream.

On APQ8060, the kernel crashes in arch_hw_breakpoint_init, taking an
undefined instruction trap within write_wb_reg. This is because Scorpion
CPUs erroneously appear to set DBGPRSR.SPD when WFI is issued, even if
the core is not powered down. When DBGPRSR.SPD is set, breakpoint and
watchpoint registers are treated as undefined.

It's possible to trigger similar crashes later on from userspace, by
requesting the kernel to install a breakpoint or watchpoint, as we can
go idle at any point between the reset of the debug registers and their
later use. This has always been the case.

Given that this has always been broken, no-one has complained until now,
and there is no clear workaround, disable hardware breakpoints and
watchpoints on Scorpion to avoid these issues.

Signed-off-by: Mark Rutland &lt;mark.rutland@arm.com&gt;
Reported-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Reviewed-by: Stephen Boyd &lt;sboyd@codeaurora.org&gt;
Acked-by: Will Deacon &lt;will.deacon@arm.com&gt;
Cc: Russell King &lt;linux@armlinux.org.uk&gt;
Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
Signed-off-by: Willy Tarreau &lt;w@1wt.eu&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit ddc37832a1349f474c4532de381498020ed71d31 upstream.

On APQ8060, the kernel crashes in arch_hw_breakpoint_init, taking an
undefined instruction trap within write_wb_reg. This is because Scorpion
CPUs erroneously appear to set DBGPRSR.SPD when WFI is issued, even if
the core is not powered down. When DBGPRSR.SPD is set, breakpoint and
watchpoint registers are treated as undefined.

It's possible to trigger similar crashes later on from userspace, by
requesting the kernel to install a breakpoint or watchpoint, as we can
go idle at any point between the reset of the debug registers and their
later use. This has always been the case.

Given that this has always been broken, no-one has complained until now,
and there is no clear workaround, disable hardware breakpoints and
watchpoints on Scorpion to avoid these issues.

Signed-off-by: Mark Rutland &lt;mark.rutland@arm.com&gt;
Reported-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Reviewed-by: Stephen Boyd &lt;sboyd@codeaurora.org&gt;
Acked-by: Will Deacon &lt;will.deacon@arm.com&gt;
Cc: Russell King &lt;linux@armlinux.org.uk&gt;
Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
Signed-off-by: Willy Tarreau &lt;w@1wt.eu&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: 8643/3: arm/ptrace: Preserve previous registers for short regset write</title>
<updated>2017-06-07T22:46:57+00:00</updated>
<author>
<name>Dave Martin</name>
<email>Dave.Martin@arm.com</email>
</author>
<published>2017-01-18T16:11:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=fcd0b4411d7b0ec70560bf4797e7ebc5b5be6aa8'/>
<id>fcd0b4411d7b0ec70560bf4797e7ebc5b5be6aa8</id>
<content type='text'>
commit 228dbbfb5d77f8e047b2a1d78da14b7158433027 upstream.

Ensure that if userspace supplies insufficient data to
PTRACE_SETREGSET to fill all the registers, the thread's old
registers are preserved.

Fixes: 5be6f62b0059 ("ARM: 6883/1: ptrace: Migrate to regsets framework")
Signed-off-by: Dave Martin &lt;Dave.Martin@arm.com&gt;
Acked-by: Russell King &lt;rmk+kernel@armlinux.org.uk&gt;
Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
Signed-off-by: Willy Tarreau &lt;w@1wt.eu&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 228dbbfb5d77f8e047b2a1d78da14b7158433027 upstream.

Ensure that if userspace supplies insufficient data to
PTRACE_SETREGSET to fill all the registers, the thread's old
registers are preserved.

Fixes: 5be6f62b0059 ("ARM: 6883/1: ptrace: Migrate to regsets framework")
Signed-off-by: Dave Martin &lt;Dave.Martin@arm.com&gt;
Acked-by: Russell King &lt;rmk+kernel@armlinux.org.uk&gt;
Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
Signed-off-by: Willy Tarreau &lt;w@1wt.eu&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: 8616/1: dt: Respect property size when parsing CPUs</title>
<updated>2017-02-06T22:32:53+00:00</updated>
<author>
<name>Robin Murphy</name>
<email>robin.murphy@arm.com</email>
</author>
<published>2016-09-26T15:50:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=88654a154ab6581cad22d2d73266b61242410fb8'/>
<id>88654a154ab6581cad22d2d73266b61242410fb8</id>
<content type='text'>
commit ba6dea4f7cedb4b1c17e36f4087675d817c2e24b upstream.

Whilst MPIDR values themselves are less than 32 bits, it is still
perfectly valid for a DT to have #address-cells &gt; 1 in the CPUs node,
resulting in the "reg" property having leading zero cell(s). In that
situation, the big-endian nature of the data conspires with the current
behaviour of only reading the first cell to cause the kernel to think
all CPUs have ID 0, and become resoundingly unhappy as a consequence.

Take the full property length into account when parsing CPUs so as to
be correct under any circumstances.

Cc: Russell King &lt;linux@armlinux.org.uk&gt;
Signed-off-by: Robin Murphy &lt;robin.murphy@arm.com&gt;
Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
Signed-off-by: Willy Tarreau &lt;w@1wt.eu&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit ba6dea4f7cedb4b1c17e36f4087675d817c2e24b upstream.

Whilst MPIDR values themselves are less than 32 bits, it is still
perfectly valid for a DT to have #address-cells &gt; 1 in the CPUs node,
resulting in the "reg" property having leading zero cell(s). In that
situation, the big-endian nature of the data conspires with the current
behaviour of only reading the first cell to cause the kernel to think
all CPUs have ID 0, and become resoundingly unhappy as a consequence.

Take the full property length into account when parsing CPUs so as to
be correct under any circumstances.

Cc: Russell King &lt;linux@armlinux.org.uk&gt;
Signed-off-by: Robin Murphy &lt;robin.murphy@arm.com&gt;
Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
Signed-off-by: Willy Tarreau &lt;w@1wt.eu&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>arm: oabi compat: add missing access checks</title>
<updated>2016-08-22T05:31:40+00:00</updated>
<author>
<name>Dave Weinstein</name>
<email>olorin@google.com</email>
</author>
<published>2016-07-28T18:55:41+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=d948109df11c8485e972b4cc0eb4820d4b754615'/>
<id>d948109df11c8485e972b4cc0eb4820d4b754615</id>
<content type='text'>
commit 7de249964f5578e67b99699c5f0b405738d820a2 upstream.

Add access checks to sys_oabi_epoll_wait() and sys_oabi_semtimedop().
This fixes CVE-2016-3857, a local privilege escalation under
CONFIG_OABI_COMPAT.

Cc: stable@vger.kernel.org
Reported-by: Chiachih Wu &lt;wuchiachih@gmail.com&gt;
Reviewed-by: Kees Cook &lt;keescook@chromium.org&gt;
Reviewed-by: Nicolas Pitre &lt;nico@linaro.org&gt;
Signed-off-by: Dave Weinstein &lt;olorin@google.com&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Willy Tarreau &lt;w@1wt.eu&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 7de249964f5578e67b99699c5f0b405738d820a2 upstream.

Add access checks to sys_oabi_epoll_wait() and sys_oabi_semtimedop().
This fixes CVE-2016-3857, a local privilege escalation under
CONFIG_OABI_COMPAT.

Cc: stable@vger.kernel.org
Reported-by: Chiachih Wu &lt;wuchiachih@gmail.com&gt;
Reviewed-by: Kees Cook &lt;keescook@chromium.org&gt;
Reviewed-by: Nicolas Pitre &lt;nico@linaro.org&gt;
Signed-off-by: Dave Weinstein &lt;olorin@google.com&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Willy Tarreau &lt;w@1wt.eu&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: fix PTRACE_SETVFPREGS on SMP systems</title>
<updated>2016-08-22T05:31:39+00:00</updated>
<author>
<name>Russell King</name>
<email>rmk+kernel@armlinux.org.uk</email>
</author>
<published>2016-05-30T22:14:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=951b391d266e93a56559d28817663a10128e0159'/>
<id>951b391d266e93a56559d28817663a10128e0159</id>
<content type='text'>
commit e2dfb4b880146bfd4b6aa8e138c0205407cebbaf upstream.

PTRACE_SETVFPREGS fails to properly mark the VFP register set to be
reloaded, because it undoes one of the effects of vfp_flush_hwstate().

Specifically vfp_flush_hwstate() sets thread-&gt;vfpstate.hard.cpu to
an invalid CPU number, but vfp_set() overwrites this with the original
CPU number, thereby rendering the hardware state as apparently "valid",
even though the software state is more recent.

Fix this by reverting the previous change.

Cc: &lt;stable@vger.kernel.org&gt;
Fixes: 8130b9d7b9d8 ("ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers")
Acked-by: Will Deacon &lt;will.deacon@arm.com&gt;
Tested-by: Simon Marchi &lt;simon.marchi@ericsson.com&gt;
Signed-off-by: Russell King &lt;rmk+kernel@armlinux.org.uk&gt;
Signed-off-by: Willy Tarreau &lt;w@1wt.eu&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit e2dfb4b880146bfd4b6aa8e138c0205407cebbaf upstream.

PTRACE_SETVFPREGS fails to properly mark the VFP register set to be
reloaded, because it undoes one of the effects of vfp_flush_hwstate().

Specifically vfp_flush_hwstate() sets thread-&gt;vfpstate.hard.cpu to
an invalid CPU number, but vfp_set() overwrites this with the original
CPU number, thereby rendering the hardware state as apparently "valid",
even though the software state is more recent.

Fix this by reverting the previous change.

Cc: &lt;stable@vger.kernel.org&gt;
Fixes: 8130b9d7b9d8 ("ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registers")
Acked-by: Will Deacon &lt;will.deacon@arm.com&gt;
Tested-by: Simon Marchi &lt;simon.marchi@ericsson.com&gt;
Signed-off-by: Russell King &lt;rmk+kernel@armlinux.org.uk&gt;
Signed-off-by: Willy Tarreau &lt;w@1wt.eu&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: 7819/1: fiq: Cast the first argument of flush_icache_range()</title>
<updated>2015-08-17T03:51:42+00:00</updated>
<author>
<name>Fabio Estevam</name>
<email>festevam@gmail.com</email>
</author>
<published>2013-08-16T11:55:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=22ab6a2be78db078b11cc478bfc99cdc8e0642cb'/>
<id>22ab6a2be78db078b11cc478bfc99cdc8e0642cb</id>
<content type='text'>
commit 7cb3be0a27805c625ff7cce20c53c926d9483243 upstream.

Commit 2ba85e7af4 (ARM: Fix FIQ code on VIVT CPUs) causes the following build warning:

arch/arm/kernel/fiq.c:92:3: warning: passing argument 1 of 'cpu_cache.coherent_kern_range' makes integer from pointer without a cast [enabled by default]

Cast it as '(unsigned long)base' to avoid the warning.

Signed-off-by: Fabio Estevam &lt;fabio.estevam@freescale.com&gt;
Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
Cc: Martin Kaiser &lt;lists@kaiser.cx&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 7cb3be0a27805c625ff7cce20c53c926d9483243 upstream.

Commit 2ba85e7af4 (ARM: Fix FIQ code on VIVT CPUs) causes the following build warning:

arch/arm/kernel/fiq.c:92:3: warning: passing argument 1 of 'cpu_cache.coherent_kern_range' makes integer from pointer without a cast [enabled by default]

Cast it as '(unsigned long)base' to avoid the warning.

Signed-off-by: Fabio Estevam &lt;fabio.estevam@freescale.com&gt;
Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
Cc: Martin Kaiser &lt;lists@kaiser.cx&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: Fix FIQ code on VIVT CPUs</title>
<updated>2015-08-17T03:51:41+00:00</updated>
<author>
<name>Russell King</name>
<email>rmk+kernel@arm.linux.org.uk</email>
</author>
<published>2013-08-08T10:51:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=627cd1579c7620dfc22e21173291ba0f0bab0cd0'/>
<id>627cd1579c7620dfc22e21173291ba0f0bab0cd0</id>
<content type='text'>
commit 2ba85e7af4c639d933c9a87a6d7363f2983d5ada upstream.

Aaro Koskinen reports the following oops:
Installing fiq handler from c001b110, length 0x164
Unable to handle kernel paging request at virtual address ffff1224
pgd = c0004000
[ffff1224] *pgd=00000000, *pte=11fff0cb, *ppte=11fff00a
...
[&lt;c0013154&gt;] (set_fiq_handler+0x0/0x6c) from [&lt;c0365d38&gt;] (ams_delta_init_fiq+0xa8/0x160)
 r6:00000164 r5:c001b110 r4:00000000 r3:fefecb4c
[&lt;c0365c90&gt;] (ams_delta_init_fiq+0x0/0x160) from [&lt;c0365b14&gt;] (ams_delta_init+0xd4/0x114)
 r6:00000000 r5:fffece10 r4:c037a9e0
[&lt;c0365a40&gt;] (ams_delta_init+0x0/0x114) from [&lt;c03613b4&gt;] (customize_machine+0x24/0x30)

This is because the vectors page is now write-protected, and to change
code in there we must write to its original alias.  Make that change,
and adjust the cache flushing such that the code will become visible
to the instruction stream on VIVT CPUs.

Reported-by: Aaro Koskinen &lt;aaro.koskinen@iki.fi&gt;
Tested-by: Aaro Koskinen &lt;aaro.koskinen@iki.fi&gt;
Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
Cc: Martin Kaiser &lt;lists@kaiser.cx&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 2ba85e7af4c639d933c9a87a6d7363f2983d5ada upstream.

Aaro Koskinen reports the following oops:
Installing fiq handler from c001b110, length 0x164
Unable to handle kernel paging request at virtual address ffff1224
pgd = c0004000
[ffff1224] *pgd=00000000, *pte=11fff0cb, *ppte=11fff00a
...
[&lt;c0013154&gt;] (set_fiq_handler+0x0/0x6c) from [&lt;c0365d38&gt;] (ams_delta_init_fiq+0xa8/0x160)
 r6:00000164 r5:c001b110 r4:00000000 r3:fefecb4c
[&lt;c0365c90&gt;] (ams_delta_init_fiq+0x0/0x160) from [&lt;c0365b14&gt;] (ams_delta_init+0xd4/0x114)
 r6:00000000 r5:fffece10 r4:c037a9e0
[&lt;c0365a40&gt;] (ams_delta_init+0x0/0x114) from [&lt;c03613b4&gt;] (customize_machine+0x24/0x30)

This is because the vectors page is now write-protected, and to change
code in there we must write to its original alias.  Make that change,
and adjust the cache flushing such that the code will become visible
to the instruction stream on VIVT CPUs.

Reported-by: Aaro Koskinen &lt;aaro.koskinen@iki.fi&gt;
Tested-by: Aaro Koskinen &lt;aaro.koskinen@iki.fi&gt;
Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
Cc: Martin Kaiser &lt;lists@kaiser.cx&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: Fix !kuser helpers case</title>
<updated>2015-08-17T03:51:41+00:00</updated>
<author>
<name>Russell King</name>
<email>rmk+kernel@arm.linux.org.uk</email>
</author>
<published>2013-08-06T08:48:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=28d4d6e9df9093d372896e76f14bc21faba7f544'/>
<id>28d4d6e9df9093d372896e76f14bc21faba7f544</id>
<content type='text'>
commit 1b16c4bcf80e319b2226a886b72b8466179c8e3a upstream.

Fix yet another build failure caused by a weird set of configuration
settings:

  LD      init/built-in.o
arch/arm/kernel/built-in.o: In function `__dabt_usr':
/home/tom3q/kernel/arch/arm/kernel/entry-armv.S:377: undefined reference to `kuser_cmpxchg64_fixup'
arch/arm/kernel/built-in.o: In function `__irq_usr':
/home/tom3q/kernel/arch/arm/kernel/entry-armv.S:387: undefined reference to `kuser_cmpxchg64_fixup'

caused by:
CONFIG_KUSER_HELPERS=n
CONFIG_CPU_32v6K=n
CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG=n

Reported-by: Tomasz Figa &lt;tomasz.figa@gmail.com&gt;
Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
Cc: Martin Kaiser &lt;lists@kaiser.cx&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 1b16c4bcf80e319b2226a886b72b8466179c8e3a upstream.

Fix yet another build failure caused by a weird set of configuration
settings:

  LD      init/built-in.o
arch/arm/kernel/built-in.o: In function `__dabt_usr':
/home/tom3q/kernel/arch/arm/kernel/entry-armv.S:377: undefined reference to `kuser_cmpxchg64_fixup'
arch/arm/kernel/built-in.o: In function `__irq_usr':
/home/tom3q/kernel/arch/arm/kernel/entry-armv.S:387: undefined reference to `kuser_cmpxchg64_fixup'

caused by:
CONFIG_KUSER_HELPERS=n
CONFIG_CPU_32v6K=n
CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG=n

Reported-by: Tomasz Figa &lt;tomasz.figa@gmail.com&gt;
Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
Cc: Martin Kaiser &lt;lists@kaiser.cx&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: fix missing syscall trace exit</title>
<updated>2015-06-06T06:19:59+00:00</updated>
<author>
<name>Russell King</name>
<email>rmk+kernel@arm.linux.org.uk</email>
</author>
<published>2015-05-15T10:02:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=68507f74d96c86b778deb3b11c0f924e85b6b986'/>
<id>68507f74d96c86b778deb3b11c0f924e85b6b986</id>
<content type='text'>
commit 1b97937246d8b97c0760d16d8992c7937bdf5e6a upstream.

Josh Stone reports:

  I've discovered a case where both arm and arm64 will miss a ptrace
  syscall-exit that they should report.  If the syscall is entered
  without TIF_SYSCALL_TRACE set, then it goes on the fast path.  It's
  then possible to have TIF_SYSCALL_TRACE added in the middle of the
  syscall, but ret_fast_syscall doesn't check this flag again.

Fix this by always checking for a syscall trace in the fast exit path.

Reported-by: Josh Stone &lt;jistone@redhat.com&gt;
Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 1b97937246d8b97c0760d16d8992c7937bdf5e6a upstream.

Josh Stone reports:

  I've discovered a case where both arm and arm64 will miss a ptrace
  syscall-exit that they should report.  If the syscall is entered
  without TIF_SYSCALL_TRACE set, then it goes on the fast path.  It's
  then possible to have TIF_SYSCALL_TRACE added in the middle of the
  syscall, but ret_fast_syscall doesn't check this flag again.

Fix this by always checking for a syscall trace in the fast exit path.

Reported-by: Josh Stone &lt;jistone@redhat.com&gt;
Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: fix asm/memory.h build error</title>
<updated>2015-02-06T06:35:39+00:00</updated>
<author>
<name>Russell King</name>
<email>rmk+kernel@arm.linux.org.uk</email>
</author>
<published>2013-12-10T19:21:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=fe9c7cb696aee94f37c459d30c38d086874300b1'/>
<id>fe9c7cb696aee94f37c459d30c38d086874300b1</id>
<content type='text'>
commit b713aa0b15015a65ad5421543b80df86de043d62 upstream.

Jason Gunthorpe reports a build failure when ARM_PATCH_PHYS_VIRT is
not defined:

In file included from arch/arm/include/asm/page.h:163:0,
                 from include/linux/mm_types.h:16,
                 from include/linux/sched.h:24,
                 from arch/arm/kernel/asm-offsets.c:13:
arch/arm/include/asm/memory.h: In function '__virt_to_phys':
arch/arm/include/asm/memory.h:244:40: error: 'PHYS_OFFSET' undeclared (first use in this function)
arch/arm/include/asm/memory.h:244:40: note: each undeclared identifier is reported only once for each function it appears in
arch/arm/include/asm/memory.h: In function '__phys_to_virt':
arch/arm/include/asm/memory.h:249:13: error: 'PHYS_OFFSET' undeclared (first use in this function)

Fixes: ca5a45c06cd4 ("ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions")
Tested-By: Jason Gunthorpe &lt;jgunthorpe@obsidianresearch.com&gt;
Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
[hpy: Backported to 3.10:
 - adjust the context
 - MPU is not supported by 3.10, so ignore fix to MPU compared with the original patch.]
Signed-off-by: Hou Pengyang &lt;houpengyang@huawei.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit b713aa0b15015a65ad5421543b80df86de043d62 upstream.

Jason Gunthorpe reports a build failure when ARM_PATCH_PHYS_VIRT is
not defined:

In file included from arch/arm/include/asm/page.h:163:0,
                 from include/linux/mm_types.h:16,
                 from include/linux/sched.h:24,
                 from arch/arm/kernel/asm-offsets.c:13:
arch/arm/include/asm/memory.h: In function '__virt_to_phys':
arch/arm/include/asm/memory.h:244:40: error: 'PHYS_OFFSET' undeclared (first use in this function)
arch/arm/include/asm/memory.h:244:40: note: each undeclared identifier is reported only once for each function it appears in
arch/arm/include/asm/memory.h: In function '__phys_to_virt':
arch/arm/include/asm/memory.h:249:13: error: 'PHYS_OFFSET' undeclared (first use in this function)

Fixes: ca5a45c06cd4 ("ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions")
Tested-By: Jason Gunthorpe &lt;jgunthorpe@obsidianresearch.com&gt;
Signed-off-by: Russell King &lt;rmk+kernel@arm.linux.org.uk&gt;
[hpy: Backported to 3.10:
 - adjust the context
 - MPU is not supported by 3.10, so ignore fix to MPU compared with the original patch.]
Signed-off-by: Hou Pengyang &lt;houpengyang@huawei.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
