Pull ARM updates from Russell King:
 "This set includes adding support for Neon acceleration of RAID6 XOR
  code from Ard Biesheuvel, cache flushing and barrier updates from Will
  Deacon, and a cleanup to the ARM debug code which reduces the amount
  of code by about 500 lines.

  A few other cleanups, such as constifying the machine descriptors
  which already shouldn't be written to, cleaning up the printing of the
  L2 cache size"

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (55 commits)
  ARM: 7826/1: debug: support debug ll on hisilicon soc
  ARM: 7830/1: delay: don't bother reporting bogomips in /proc/cpuinfo
  ARM: 7829/1: Add ".text.unlikely" and ".text.hot" to arm unwind tables
  ARM: 7828/1: ARMv7-M: implement restart routine common to all v7-M machines
  ARM: 7827/1: highbank: fix debug uart virtual address for LPAE
  ARM: 7823/1: errata: workaround Cortex-A15 erratum 773022
  ARM: 7806/1: allow DEBUG_UNCOMPRESS for Tegra
  ARM: 7793/1: debug: use generic option for ep93xx PL10x debug port
  ARM: debug: move SPEAr debug to generic PL01x code
  ARM: debug: move davinci debug to generic 8250 code
  ARM: debug: move keystone debug to generic 8250 code
  ARM: debug: remove DEBUG_ROCKCHIP_UART
  ARM: debug: provide generic option choices for 8250 and PL01x ports
  ARM: debug: move PL01X debug include into arch/arm/include/debug/
  ARM: debug: provide PL01x debug uart phys/virt address configuration options
  ARM: debug: add support for word accesses to debug/8250.S
  ARM: debug: move 8250 debug include into arch/arm/include/debug/
  ARM: debug: provide 8250 debug uart phys/virt address configuration options
  ARM: debug: provide 8250 debug uart register shift configuration option
  ARM: debug: provide 8250 debug uart flow control configuration option
  ...

OF/DT core library now provides architecture specific hook to match the
logical cpu index with the corresponding physical identifier. Most of the
cpu DT node parsing and initialisation is contained in devtree.c. So it's
better to define ARM specific arch_match_cpu_phys_id there.

This mainly helps to avoid replication of the code doing CPU node parsing
and physical(MPIDR) to logical mapping.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

struct machine_desc records are defined everywhere as a 'const'
structure, but unfortuantely it loses its const-ness through the use of
linker magic - the symbols which surround the section are not declared
const so it becomes possible not to use 'const' for pointers to these
const structures.

Let's fix this oversight - all pointers to these structures should be
marked const too.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Due to recent changes and expecations of proper cpu bindings, there are
now cases for many of the in-tree devicetrees where a WARN() will hit
on boot due to badly formatted /cpus nodes.

Downgrade this to a pr_warn() to be less alarmist, since it's not a
new problem.

Tested on Arndale, Cubox, Seaboard and Panda ES. Panda hits the WARN
without this, the others do not.

Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The __cpu_logical_map array is statically initialized to 0, which is a valid
MPIDR value. To prevent issues with the current implementation, this patch
defines an MPIDR_INVALID value, and statically initializes the
__cpu_logical_map[] array to it. Entries in the arm_dt_init_cpu_maps()
tmp_map array used to stash DT reg properties while parsing DT are initialized
with the MPIDR_INVALID value as well for consistency.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The introduction of the cpu-map topology node in the cpus node implies
that cpus node might have children that are not cpu nodes. The DT
parsing code needs updating otherwise it would check for cpu nodes
properties in nodes that are not required to contain them, resulting
in warnings that have no bearing on bindings defined in the dts source file.

Cc: <stable@vger.kernel.org> [3.8+]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Since we now have default implementations for init_time and init_irq,
the init_machine callback is the only one that is not yet optional,
but since simple DT based platforms all have the same
of_platform_populate function call in there, we can consolidate them
as well, and then actually boot with a completely empty machine_desc.
Unofortunately we cannot just default to an empty init_machine: We
cannot call of_platform_populate before init_machine because that
does not work in case of auxdata, and we cannot call it after
init_machine either because the machine might need to run code
after adding the devices.

To take the final step, this adds support for booting without defining
any machine_desc whatsoever.

For the case that CONFIG_MULTIPLATFORM is enabled, it adds a
global machine descriptor that never matches any machine but is
used as a fallback if nothing else matches. We assume that without
CONFIG_MULTIPLATFORM, we only want to boot on the systems that the kernel
is built for, so we still retain the build-time warning for missing
machine descriptors and the run-time warning when the platform does not
match in that case.

In the case that we run on a multiplatform kernel and the machine
provides a fully populated device tree, we attempt to keep booting,
hoping that no machine specific callbacks are necessary.

Finally, this also removes the misguided "select ARCH_VEXPRESS" that
was only added to avoid a build error for allnoconfig kernels.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: "Russell King - ARM Linux" <linux@arm.linux.org.uk>
Cc: Rob Herring <robherring2@gmail.com>

If a kernel is configured with a DT containing more /cpu nodes than
nr_cpu_ids, the number of cpus must be capped in the DT parsing
code. Current code carries out the check, but fails to cap the
value and the check is executed after the cpu logical index is used,
which can lead to memory corruption due to index overflow.

This patch refactors the check against nr_cpu_ids and move it before
any computed index is used in the parsing code.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

When booting through a device tree, the kernel cpu logical id map can be
initialized using device tree data passed by FW or through an embedded blob.

This patch adds a function that parses device tree "cpu" nodes and
retrieves the corresponding CPUs hardware identifiers (MPIDR).
It sets the possible cpus and the cpu logical map values according to
the number of CPUs defined in the device tree and respective properties.

The device tree HW identifiers are considered valid if all CPU nodes contain
a "reg" property, there are no duplicate "reg" entries and the DT defines a
CPU node whose "reg" property matches the MPIDR[23:0] of the boot CPU.

The primary CPU is assigned cpu logical number 0 to keep the current convention
valid.

Current bindings documentation is included in the patch:

Documentation/devicetree/bindings/arm/cpus.txt

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>

Many of the core ARM kernel files are not modules, but just
including module.h for exporting symbols.  Now these files can
use the lighter footprint export.h for this role.

There are probably lots more, but ARM files of mach-* and plat-*
don't get coverage via a simple yesconfig build.  They will have
to be cleaned up and tested via using their respective configs.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>