linux-stable.git/arch/arm/include, branch v3.7 Linux kernel stable tree Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm 2012-11-07T03:14:45+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-11-07T03:14:45+00:00 3cc5a2ee7fc8f67abeb91f39fd553b5d2d55b775 Pull arm fixes from Russell King: "Not much here again. The two most notable things here are the sched_clock() fix, which was causing problems with the scheduling of threaded IRQs after a suspend event, and the vfp fix, which afaik has only been seen on some older OMAP boards. Nevertheless, both are fairly important fixes." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7569/1: mm: uninitialized warning corrections ARM: 7567/1: io: avoid GCC's offsettable addressing modes for halfword accesses ARM: 7566/1: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set ARM: 7565/1: sched: stop sched_clock() during suspend 
Pull arm fixes from Russell King:
 "Not much here again.

  The two most notable things here are the sched_clock() fix, which was
  causing problems with the scheduling of threaded IRQs after a suspend
  event, and the vfp fix, which afaik has only been seen on some older
  OMAP boards.  Nevertheless, both are fairly important fixes."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7569/1: mm: uninitialized warning corrections
  ARM: 7567/1: io: avoid GCC's offsettable addressing modes for halfword accesses
  ARM: 7566/1: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set
  ARM: 7565/1: sched: stop sched_clock() during suspend
ARM: 7567/1: io: avoid GCC's offsettable addressing modes for halfword accesses 2012-10-29T10:04:27+00:00 Will Deacon will.deacon@arm.com 2012-10-26T17:42:08+00:00 7629a9f661f72eb383fb896e59efea1eac74e882 Using the 'o' memory constraint in inline assembly can result in GCC generating invalid immediate offsets for memory access instructions with reduced addressing capabilities (i.e. smaller than 12-bit immediate offsets): http://gcc.gnu.org/bugzilla/show_bug.cgi?id=54983 As there is no constraint to specify the exact addressing mode we need, fallback to using 'Q' exclusively for halfword I/O accesses. This may emit an additional add instruction (using an extra register) in order to construct the address but it will always be accepted by GAS. Reported-by: Bastian Hecht <hechtb@googlemail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Using the 'o' memory constraint in inline assembly can result in GCC
generating invalid immediate offsets for memory access instructions with
reduced addressing capabilities (i.e. smaller than 12-bit immediate
offsets):

  http://gcc.gnu.org/bugzilla/show_bug.cgi?id=54983

As there is no constraint to specify the exact addressing mode we need,
fallback to using 'Q' exclusively for halfword I/O accesses. This may
emit an additional add instruction (using an extra register) in order
to construct the address but it will always be accepted by GAS.

Reported-by: Bastian Hecht <hechtb@googlemail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: 7566/1: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set 2012-10-29T10:04:05+00:00 Paul Walmsley paul@pwsan.com 2012-10-23T19:32:59+00:00 39141ddfb63a664f26d3f42f64ee386e879b492c After commit 846a136881b8f73c1f74250bf6acfaa309cab1f2 ("ARM: vfp: fix saving d16-d31 vfp registers on v6+ kernels"), the OMAP 2430SDP board started crashing during boot with omap2plus_defconfig: [ 3.875122] mmcblk0: mmc0:e624 SD04G 3.69 GiB [ 3.915954] mmcblk0: p1 [ 4.086639] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 4.093719] Modules linked in: [ 4.096954] CPU: 0 Not tainted (3.6.0-02232-g759e00b #570) [ 4.103149] PC is at vfp_reload_hw+0x1c/0x44 [ 4.107666] LR is at __und_usr_fault_32+0x0/0x8 It turns out that the context save/restore fix unmasked a latent bug in commit 5aaf254409f8d58229107b59507a8235b715a960 ("ARM: 6203/1: Make VFPv3 usable on ARMv6"). When CONFIG_VFPv3 is set, but the kernel is booted on a pre-VFPv3 core, the code attempts to save and restore the d16-d31 VFP registers. These are only present on non-D16 VFPv3+, so this results in an undefined instruction exception. The code didn't crash before commit 846a136 because the save and restore code was only touching d0-d15, present on all VFP. Fix by implementing a request from Russell King to add a new HWCAP flag that affirmatively indicates the presence of the d16-d31 registers: http://marc.info/?l=linux-arm-kernel&m=135013547905283&w=2 and some feedback from Måns to clarify the name of the HWCAP flag. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Martin <dave.martin@linaro.org> Cc: Måns Rullgård <mans.rullgard@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
After commit 846a136881b8f73c1f74250bf6acfaa309cab1f2 ("ARM: vfp: fix
saving d16-d31 vfp registers on v6+ kernels"), the OMAP 2430SDP board
started crashing during boot with omap2plus_defconfig:

[    3.875122] mmcblk0: mmc0:e624 SD04G 3.69 GiB
[    3.915954]  mmcblk0: p1
[    4.086639] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
[    4.093719] Modules linked in:
[    4.096954] CPU: 0    Not tainted  (3.6.0-02232-g759e00b #570)
[    4.103149] PC is at vfp_reload_hw+0x1c/0x44
[    4.107666] LR is at __und_usr_fault_32+0x0/0x8

It turns out that the context save/restore fix unmasked a latent bug
in commit 5aaf254409f8d58229107b59507a8235b715a960 ("ARM: 6203/1: Make
VFPv3 usable on ARMv6").  When CONFIG_VFPv3 is set, but the kernel is
booted on a pre-VFPv3 core, the code attempts to save and restore the
d16-d31 VFP registers.  These are only present on non-D16 VFPv3+, so
this results in an undefined instruction exception.  The code didn't
crash before commit 846a136 because the save and restore code was
only touching d0-d15, present on all VFP.

Fix by implementing a request from Russell King to add a new HWCAP
flag that affirmatively indicates the presence of the d16-d31
registers:

   http://marc.info/?l=linux-arm-kernel&m=135013547905283&w=2

and some feedback from Måns to clarify the name of the HWCAP flag.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Martin <dave.martin@linaro.org>
Cc: Måns Rullgård <mans.rullgard@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM: 7565/1: sched: stop sched_clock() during suspend 2012-10-29T10:02:49+00:00 Felipe Balbi 2 balbi@ti.com 2012-10-23T18:00:03+00:00 6a4dae5e138a32b45ca5218cc2b81802f9d378c3 The scheduler imposes a requirement to sched_clock() which is to stop the clock during suspend, if we don't do that any RT thread will be rescheduled in the future which might cause any sort of problems. This became an issue on OMAP when we converted omap-i2c.c to use threaded IRQs, it turned out that depending on how much time we spent on suspend, the I2C IRQ thread would end up being rescheduled so far in the future that I2C transfers would timeout and, because omap_hsmmc depends on an I2C-connected device to detect if an MMC card is inserted in the slot, our rootfs would just vanish. arch/arm/kernel/sched_clock.c already had an optional implementation (sched_clock_needs_suspend()) which would handle scheduler's requirement properly, what this patch does is simply to make that implementation non-optional. Note that this has the side-effect that printk timings won't reflect the actual time spent on suspend so other methods to measure that will have to be used. This has been tested with beagleboard XM (OMAP3630) and pandaboard rev A3 (OMAP4430). Suspend to RAM is now working after this patch. Thanks to Kevin Hilman for helping out with debugging. Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
The scheduler imposes a requirement to sched_clock()
which is to stop the clock during suspend, if we don't
do that any RT thread will be rescheduled in the future
which might cause any sort of problems.

This became an issue on OMAP when we converted omap-i2c.c
to use threaded IRQs, it turned out that depending on how
much time we spent on suspend, the I2C IRQ thread would
end up being rescheduled so far in the future that I2C
transfers would timeout and, because omap_hsmmc depends
on an I2C-connected device to detect if an MMC card is
inserted in the slot, our rootfs would just vanish.

arch/arm/kernel/sched_clock.c already had an optional
implementation (sched_clock_needs_suspend()) which would
handle scheduler's requirement properly, what this patch
does is simply to make that implementation non-optional.

Note that this has the side-effect that printk timings
won't reflect the actual time spent on suspend so other
methods to measure that will have to be used.

This has been tested with beagleboard XM (OMAP3630) and
pandaboard rev A3 (OMAP4430). Suspend to RAM is now working
after this patch.

Thanks to Kevin Hilman for helping out with debugging.

Acked-by: Kevin Hilman <khilman@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Merge tag 'fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2012-10-28T18:12:38+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-10-28T18:12:38+00:00 065c8012b2ff79ed9b47e39b60d252b3802ecc0d Pull arm-soc fixes from Arnd Bergmann: "Bug fixes for a number of ARM platforms, mostly OMAP, imx and at91. These come a little later than I had hoped but unfortunately we had a few of these patches cause regressions themselves and had to work out how to deal with those in the meantime." * tag 'fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) Revert "ARM i.MX25: Fix PWM per clock lookups" ARM: versatile: fix versatile_defconfig ARM: mvebu: update defconfig with 3.7 changes ARM: at91: fix at91x40 build ARM: socfpga: Fix socfpga compilation with early_printk() enabled ARM: SPEAr: Remove unused empty files MAINTAINERS: Add arm-soc tree entry ARM: dts: mxs: add the "clock-names" for gpmi-nand ARM: ux500: Correct SDI5 address and add some format changes ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE ARM: at91: drop duplicated config SOC_AT91SAM9 entry ARM: at91/i2c: change id to let i2c-at91 work ARM: at91/i2c: change id to let i2c-gpio work ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels. ARM: at91: fix external interrupt specification in board code ARM: at91: fix external interrupts in non-DT case ARM: at91: at91sam9g10: fix SOC type detection ARM: at91/tc: fix typo in the DT document ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500 ... 
Pull arm-soc fixes from Arnd Bergmann:
 "Bug fixes for a number of ARM platforms, mostly OMAP, imx and at91.

  These come a little later than I had hoped but unfortunately we had a
  few of these patches cause regressions themselves and had to work out
  how to deal with those in the meantime."

* tag 'fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  Revert "ARM i.MX25: Fix PWM per clock lookups"
  ARM: versatile: fix versatile_defconfig
  ARM: mvebu: update defconfig with 3.7 changes
  ARM: at91: fix at91x40 build
  ARM: socfpga: Fix socfpga compilation with early_printk() enabled
  ARM: SPEAr: Remove unused empty files
  MAINTAINERS: Add arm-soc tree entry
  ARM: dts: mxs: add the "clock-names" for gpmi-nand
  ARM: ux500: Correct SDI5 address and add some format changes
  ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT
  ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE
  ARM: at91: drop duplicated config SOC_AT91SAM9 entry
  ARM: at91/i2c: change id to let i2c-at91 work
  ARM: at91/i2c: change id to let i2c-gpio work
  ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels.
  ARM: at91: fix external interrupt specification in board code
  ARM: at91: fix external interrupts in non-DT case
  ARM: at91: at91sam9g10: fix SOC type detection
  ARM: at91/tc: fix typo in the DT document
  ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500
  ...
Revert "ARM: dma-mapping: support debug_dma_mapping_error" 2012-10-26T05:39:13+00:00 Marek Szyprowski m.szyprowski@samsung.com 2012-10-26T05:39:13+00:00 697575896670ba9e76760ce8bbc1f5a3001967d6 This reverts commit 871ae57adc5ed092c1341f411514d0e8482e2611, which is scheduled for v3.8 and accidently got into v3.7-rc series. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> 
This reverts commit 871ae57adc5ed092c1341f411514d0e8482e2611, which is
scheduled for v3.8 and accidently got into v3.7-rc series.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm 2012-10-25T22:59:34+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-10-25T22:59:34+00:00 6bb1e3819c08d640bc7e64fc522d7d8b1bc4d0b9 Pull ARM fixes from Russell King: "A random collection of various fixes, mainly from Arnd and a few other people. Not thing really stands out here." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: drop experimental status for hotplug and Thumb2 ARM: 7560/1: SMP_TWD: use DIV_ROUND_CLOSEST() for periodic mode ARM: 7559/1: smp: switch away from the idmap before updating init_mm.mm_count ARM: 7556/1: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD ARM: 7555/1: kexec: fix segment memory addresses check ARM: warnings in arch/arm/include/asm/uaccess.h ARM: binfmt_flat: unused variable 'persistent' ARM: be really quiet when building with 'make -s' ARM: pass -marm to gcc by default for both C and assembler ARM: Xen: fix initial build problems ARM: export default read_current_timer ARM: Fix another build warning in arch/arm/mm/alignment.c ARM: export set_irq_flags ARM: kprobes: make more tests conditional 
Pull ARM fixes from Russell King:
 "A random collection of various fixes, mainly from Arnd and a few other
  people.  Not thing really stands out here."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: drop experimental status for hotplug and Thumb2
  ARM: 7560/1: SMP_TWD: use DIV_ROUND_CLOSEST() for periodic mode
  ARM: 7559/1: smp: switch away from the idmap before updating init_mm.mm_count
  ARM: 7556/1: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD
  ARM: 7555/1: kexec: fix segment memory addresses check
  ARM: warnings in arch/arm/include/asm/uaccess.h
  ARM: binfmt_flat: unused variable 'persistent'
  ARM: be really quiet when building with 'make -s'
  ARM: pass -marm to gcc by default for both C and assembler
  ARM: Xen: fix initial build problems
  ARM: export default read_current_timer
  ARM: Fix another build warning in arch/arm/mm/alignment.c
  ARM: export set_irq_flags
  ARM: kprobes: make more tests conditional
Merge branch 'fixes_for_linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping 2012-10-25T22:57:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-10-25T22:57:48+00:00 cff7b8ba60e332377568c3d55c8036e9b1de32e6 Pull CMA and DMA-mapping fixes from Marek Szyprowski: "This consists mainly of a set of one-liner fixes and cleanups for a few minor issues identified in both Contiguous Memory Allocator code and ARM DMA-mapping subsystem." * 'fixes_for_linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: mm: Remove unused arm_vmregion priv field ARM: dma-mapping: fix build warning in __dma_alloc() ARM: dma-mapping: support debug_dma_mapping_error mm: cma: alloc_contig_range: return early for err path drivers: cma: Fix wrong CMA selected region size default value drivers: dma-coherent: Fix typo in dma_mmap_from_coherent documentation drivers: dma-contiguous: Don't redefine SZ_1M 
Pull CMA and DMA-mapping fixes from Marek Szyprowski:
 "This consists mainly of a set of one-liner fixes and cleanups for a
  few minor issues identified in both Contiguous Memory Allocator code
  and ARM DMA-mapping subsystem."

* 'fixes_for_linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: mm: Remove unused arm_vmregion priv field
  ARM: dma-mapping: fix build warning in __dma_alloc()
  ARM: dma-mapping: support debug_dma_mapping_error
  mm: cma: alloc_contig_range: return early for err path
  drivers: cma: Fix wrong CMA selected region size default value
  drivers: dma-coherent: Fix typo in dma_mmap_from_coherent documentation
  drivers: dma-contiguous: Don't redefine SZ_1M
ARM: socfpga: Fix socfpga compilation with early_printk() enabled 2012-10-25T14:52:53+00:00 Pavel Machek pavel@denx.de 2012-10-17T18:16:48+00:00 ef3f94412a4d7e107392e7c7cfc3e2d0668aa1aa This fixes early_printk() compilation for socfpga. (senduart/busyuart/waituart were missing). It does that by making Picochip code generic. Signed-off-by: Pavel Machek <pavel@denx.de> Acked-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
This fixes early_printk() compilation for
socfpga. (senduart/busyuart/waituart were missing). It does that by
making Picochip code generic.

Signed-off-by: Pavel Machek <pavel@denx.de>
Acked-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: dma-mapping: support debug_dma_mapping_error 2012-10-23T12:05:34+00:00 Ming Lei ming.lei@canonical.com 2012-10-22T12:44:03+00:00 871ae57adc5ed092c1341f411514d0e8482e2611 Without the patch, kind of below warning will be dumped if DMA-API debug is enabled: [ 11.069763] ------------[ cut here ]------------ [ 11.074645] WARNING: at lib/dma-debug.c:948 check_unmap+0x770/0x860() [ 11.081420] ehci-omap ehci-omap.0: DMA-API: device driver failed to check map error[device address=0x0000000 0adb78e80] [size=8 bytes] [mapped as single] [ 11.095611] Modules linked in: Cc: Russell King <linux@arm.linux.org.uk> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> 
Without the patch, kind of below warning will be dumped if DMA-API
debug is enabled:

[   11.069763] ------------[ cut here ]------------
[   11.074645] WARNING: at lib/dma-debug.c:948 check_unmap+0x770/0x860()
[   11.081420] ehci-omap ehci-omap.0: DMA-API: device driver failed to
check map error[device address=0x0000000
0adb78e80] [size=8 bytes] [mapped as single]
[   11.095611] Modules linked in:

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>