linux-stable.git/arch/arm/include/uapi/asm, branch v3.16

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm into next

2014-06-04T15:47:12+00:00

Pull KVM updates from Paolo Bonzini:
 "At over 200 commits, covering almost all supported architectures, this
  was a pretty active cycle for KVM.  Changes include:

   - a lot of s390 changes: optimizations, support for migration, GDB
     support and more

   - ARM changes are pretty small: support for the PSCI 0.2 hypercall
     interface on both the guest and the host (the latter acked by
     Catalin)

   - initial POWER8 and little-endian host support

   - support for running u-boot on embedded POWER targets

   - pretty large changes to MIPS too, completing the userspace
     interface and improving the handling of virtualized timer hardware

   - for x86, a larger set of changes is scheduled for 3.17.  Still, we
     have a few emulator bugfixes and support for running nested
     fully-virtualized Xen guests (para-virtualized Xen guests have
     always worked).  And some optimizations too.

  The only missing architecture here is ia64.  It's not a coincidence
  that support for KVM on ia64 is scheduled for removal in 3.17"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (203 commits)
  KVM: add missing cleanup_srcu_struct
  KVM: PPC: Book3S PR: Rework SLB switching code
  KVM: PPC: Book3S PR: Use SLB entry 0
  KVM: PPC: Book3S HV: Fix machine check delivery to guest
  KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs
  KVM: PPC: Book3S HV: Make sure we don't miss dirty pages
  KVM: PPC: Book3S HV: Fix dirty map for hugepages
  KVM: PPC: Book3S HV: Put huge-page HPTEs in rmap chain for base address
  KVM: PPC: Book3S HV: Fix check for running inside guest in global_invalidates()
  KVM: PPC: Book3S: Move KVM_REG_PPC_WORT to an unused register number
  KVM: PPC: Book3S: Add ONE_REG register names that were missed
  KVM: PPC: Add CAP to indicate hcall fixes
  KVM: PPC: MPIC: Reset IRQ source private members
  KVM: PPC: Graciously fail broken LE hypercalls
  PPC: ePAPR: Fix hypercall on LE guest
  KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler
  KVM: PPC: BOOK3S: Always use the saved DAR value
  PPC: KVM: Make NX bit available with magic page
  KVM: PPC: Disable NX for old magic page using guests
  KVM: PPC: BOOK3S: HV: Add mixed page-size support for guest
  ...

ARM/ARM64: KVM: Add base for PSCI v0.2 emulation

2014-04-30T11:18:57+00:00

Currently, the in-kernel PSCI emulation provides PSCI v0.1 interface to
VCPUs. This patch extends current in-kernel PSCI emulation to provide
PSCI v0.2 interface to VCPUs.

By default, ARM/ARM64 KVM will always provide PSCI v0.1 interface for
keeping the ABI backward-compatible.

To select PSCI v0.2 interface for VCPUs, the user space (i.e. QEMU or
KVMTOOL) will have to set KVM_ARM_VCPU_PSCI_0_2 feature when doing VCPU
init using KVM_ARM_VCPU_INIT ioctl.

Signed-off-by: Anup Patel 
Signed-off-by: Pranavkumar Sawargaonkar 
Acked-by: Christoffer Dall 
Acked-by: Marc Zyngier 
Signed-off-by: Christoffer Dall

ARM: add renameat2 syscall

2014-04-23T10:27:42+00:00

Signed-off-by: Miklos Szeredi 
[dropped arch/arm/include/asm/unistd.h changes --rmk]
Signed-off-by: Russell King

ARM: 7982/1: introduce HWCAP2 feature bits for ARMv8 Crypto Extensions

2014-02-25T11:40:50+00:00

This allocates feature bits 0-4 in HWCAP2 for the crypto and CRC
extensions introduced in ARMv8.

Signed-off-by: Ard Biesheuvel 
Acked-by: Catalin Marinas 
Signed-off-by: Russell King

ARM: 7981/1: add support for AT_HWCAP2 ELF auxv entry

2014-02-25T11:40:48+00:00

This enables AT_HWCAP2 for ARM. The generic support for this
new ELF auxv entry was added in commit 2171364d1a9 (powerpc:
Add HWCAP2 aux entry)

Signed-off-by: Ard Biesheuvel 
Acked-by: Catalin Marinas 
Signed-off-by: Russell King

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2014-01-23T05:40:43+00:00

Pull KVM updates from Paolo Bonzini:
 "First round of KVM updates for 3.14; PPC parts will come next week.

  Nothing major here, just bugfixes all over the place.  The most
  interesting part is the ARM guys' virtualized interrupt controller
  overhaul, which lets userspace get/set the state and thus enables
  migration of ARM VMs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (67 commits)
  kvm: make KVM_MMU_AUDIT help text more readable
  KVM: s390: Fix memory access error detection
  KVM: nVMX: Update guest activity state field on L2 exits
  KVM: nVMX: Fix nested_run_pending on activity state HLT
  KVM: nVMX: Clean up handling of VMX-related MSRs
  KVM: nVMX: Add tracepoints for nested_vmexit and nested_vmexit_inject
  KVM: nVMX: Pass vmexit parameters to nested_vmx_vmexit
  KVM: nVMX: Leave VMX mode on clearing of feature control MSR
  KVM: VMX: Fix DR6 update on #DB exception
  KVM: SVM: Fix reading of DR6
  KVM: x86: Sync DR7 on KVM_SET_DEBUGREGS
  add support for Hyper-V reference time counter
  KVM: remove useless write to vcpu->hv_clock.tsc_timestamp
  KVM: x86: fix tsc catchup issue with tsc scaling
  KVM: x86: limit PIT timer frequency
  KVM: x86: handle invalid root_hpa everywhere
  kvm: Provide kvm_vcpu_eligible_for_directed_yield() stub
  kvm: vfio: silence GCC warning
  KVM: ARM: Remove duplicate include
  arm/arm64: KVM: relax the requirements of VMA alignment for THP
  ...

sched: Add new scheduler syscalls to support an extended scheduling parameters ABI

2014-01-13T12:41:04+00:00

Add the syscalls needed for supporting scheduling algorithms
with extended scheduling parameters (e.g., SCHED_DEADLINE).

In general, it makes possible to specify a periodic/sporadic task,
that executes for a given amount of runtime at each instance, and is
scheduled according to the urgency of their own timing constraints,
i.e.:

 - a (maximum/typical) instance execution time,
 - a minimum interval between consecutive instances,
 - a time constraint by which each instance must be completed.

Thus, both the data structure that holds the scheduling parameters of
the tasks and the system calls dealing with it must be extended.
Unfortunately, modifying the existing struct sched_param would break
the ABI and result in potentially serious compatibility issues with
legacy binaries.

For these reasons, this patch:

 - defines the new struct sched_attr, containing all the fields
   that are necessary for specifying a task in the computational
   model described above;

 - defines and implements the new scheduling related syscalls that
   manipulate it, i.e., sched_setattr() and sched_getattr().

Syscalls are introduced for x86 (32 and 64 bits) and ARM only, as a
proof of concept and for developing and testing purposes. Making them
available on other architectures is straightforward.

Since no "user" for these new parameters is introduced in this patch,
the implementation of the new system calls is just identical to their
already existing counterpart. Future patches that implement scheduling
policies able to exploit the new data structure must also take care of
modifying the sched_*attr() calls accordingly with their own purposes.

Signed-off-by: Dario Faggioli 
[ Rewrote to use sched_attr. ]
Signed-off-by: Juri Lelli 
[ Removed sched_setscheduler2() for now. ]
Signed-off-by: Peter Zijlstra 
Link: http://lkml.kernel.org/r/1383831828-15501-3-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar

KVM: arm-vgic: Add vgic reg access from dev attr

2013-12-21T18:01:39+00:00

Add infrastructure to handle distributor and cpu interface register
accesses through the KVM_{GET/SET}_DEVICE_ATTR interface by adding the
KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_CPU_REGS groups
and defining the semantics of the attr field to be the MMIO offset as
specified in the GICv2 specs.

Missing register accesses or other changes in individual register access
functions to support save/restore of the VGIC state is added in
subsequent patches.

Acked-by: Marc Zyngier 
Signed-off-by: Christoffer Dall

KVM: arm-vgic: Set base addr through device API

2013-12-21T18:01:22+00:00

Support setting the distributor and cpu interface base addresses in the
VM physical address space through the KVM_{SET,GET}_DEVICE_ATTR API
in addition to the ARM specific API.

This has the added benefit of being able to share more code in user
space and do things in a uniform manner.

Also deprecate the older API at the same time, but backwards
compatibility will be maintained.

Acked-by: Marc Zyngier 
Signed-off-by: Christoffer Dall

ARM/KVM: save and restore generic timer registers

2013-12-21T18:00:15+00:00

For migration to work we need to save (and later restore) the state of
each core's virtual generic timer.
Since this is per VCPU, we can use the [gs]et_one_reg ioctl and export
the three needed registers (control, counter, compare value).
Though they live in cp15 space, we don't use the existing list, since
they need special accessor functions and the arch timer is optional.

Acked-by: Marc Zynger 
Signed-off-by: Andre Przywara 
Signed-off-by: Christoffer Dall