We want to ensure that the mask related to calling do_work_pending()
is within the first 16 bits. Move bits unrelated to that outside of
that range, to avoid spuriously calling do_work_pending() when we don't
need to.

Cc: stable@vger.kernel.org
Fixes: 32d59773da38 ("arm: add support for TIF_NOTIFY_SIGNAL")
Reported-and-tested-by: Hui Tang <tanghui20@huawei.com>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Link: https://lore.kernel.org/lkml/7ecb8f3c-2aeb-a905-0d4a-aa768b9649b5@huawei.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull gpio updates from Bartosz Golaszewski:
 "We have a new GPIO multiplexer driver, bunch of driver updates and
  refactoring in the core GPIO library.

  GPIO core:
   - teach gpiolib to work with software nodes for HW description
   - remove ARCH_NR_GPIOS treewide as we no longer impose any limit on
     the number of GPIOS since the allocation became entirely dynamic
   - add support for HW quirks for Cirrus CS42L56 codec, Marvell NFC
     controller, Freescale PCIe and Ethernet controller, Himax LCDs and
     Mediatek mt2701
   - refactor OF quirk code
   - some general refactoring of the OF and ACPI code, adding new
     helpers, minor tweaks and fixes, making fwnode usage consistent
     etc.

  GPIO uAPI:
   - fix an issue where the user-space can trigger a NULL-pointer
     dereference in the kernel by opening a device file, forcing a
     driver unbind and then calling one of the syscalls on the
     associated file descriptor

  New drivers:
   - add gpio-latch: a new GPIO multiplexer based on latches connected
     to other GPIOs

  Driver updates:
   - convert i2c GPIO expanders to using .probe_new()
   - drop the gpio-sta2x11 driver
   - factor out common code for the ACCES IDIO-16 family of controllers
     and use this new library wherever applicable in drivers
   - add DT support to gpio-hisi
   - allow building gpio-davinci as a module and increase its maxItems
     property
   - add support for a new model to gpio-pca9570
   - other minor changes to various drivers"

* tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (66 commits)
  gpio: sim: set a limit on the number of GPIOs
  gpiolib: protect the GPIO device against being dropped while in use by user-space
  gpiolib: cdev: fix NULL-pointer dereferences
  gpiolib: Provide to_gpio_device() helper
  gpiolib: Unify access to the device properties
  gpio: Do not include <linux/kernel.h> when not really needed.
  gpio: pcf857x: Convert to i2c's .probe_new()
  gpio: pca953x: Convert to i2c's .probe_new()
  gpio: max732x: Convert to i2c's .probe_new()
  dt-bindings: gpio: gpio-davinci: Increase maxItems in gpio-line-names
  gpiolib: ensure that fwnode is properly set
  gpio: sl28cpld: Replace irqchip mask_invert with unmask_base
  gpiolib: of: Use correct fwnode for DT-probed chips
  gpiolib: of: Drop redundant check in of_mm_gpiochip_remove()
  gpiolib: of: Prepare of_mm_gpiochip_add_data() for fwnode
  gpiolib: add support for software nodes
  gpiolib: consolidate GPIO lookups
  gpiolib: acpi: avoid leaking ACPI details into upper gpiolib layers
  gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodes
  gpiolib: acpi: change acpi_find_gpio() to accept firmware node
  ...

Pull MM updates from Andrew Morton:

 - More userfaultfs work from Peter Xu

 - Several convert-to-folios series from Sidhartha Kumar and Huang Ying

 - Some filemap cleanups from Vishal Moola

 - David Hildenbrand added the ability to selftest anon memory COW
   handling

 - Some cpuset simplifications from Liu Shixin

 - Addition of vmalloc tracing support by Uladzislau Rezki

 - Some pagecache folioifications and simplifications from Matthew
   Wilcox

 - A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use
   it

 - Miguel Ojeda contributed some cleanups for our use of the
   __no_sanitize_thread__ gcc keyword.

   This series should have been in the non-MM tree, my bad

 - Naoya Horiguchi improved the interaction between memory poisoning and
   memory section removal for huge pages

 - DAMON cleanups and tuneups from SeongJae Park

 - Tony Luck fixed the handling of COW faults against poisoned pages

 - Peter Xu utilized the PTE marker code for handling swapin errors

 - Hugh Dickins reworked compound page mapcount handling, simplifying it
   and making it more efficient

 - Removal of the autonuma savedwrite infrastructure from Nadav Amit and
   David Hildenbrand

 - zram support for multiple compression streams from Sergey Senozhatsky

 - David Hildenbrand reworked the GUP code's R/O long-term pinning so
   that drivers no longer need to use the FOLL_FORCE workaround which
   didn't work very well anyway

 - Mel Gorman altered the page allocator so that local IRQs can remnain
   enabled during per-cpu page allocations

 - Vishal Moola removed the try_to_release_page() wrapper

 - Stefan Roesch added some per-BDI sysfs tunables which are used to
   prevent network block devices from dirtying excessive amounts of
   pagecache

 - David Hildenbrand did some cleanup and repair work on KSM COW
   breaking

 - Nhat Pham and Johannes Weiner have implemented writeback in zswap's
   zsmalloc backend

 - Brian Foster has fixed a longstanding corner-case oddity in
   file[map]_write_and_wait_range()

 - sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
   Chen

 - Shiyang Ruan has done some work on fsdax, to make its reflink mode
   work better under xfstests. Better, but still not perfect

 - Christoph Hellwig has removed the .writepage() method from several
   filesystems. They only need .writepages()

 - Yosry Ahmed wrote a series which fixes the memcg reclaim target
   beancounting

 - David Hildenbrand has fixed some of our MM selftests for 32-bit
   machines

 - Many singleton patches, as usual

* tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits)
  mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio
  mm: mmu_gather: allow more than one batch of delayed rmaps
  mm: fix typo in struct pglist_data code comment
  kmsan: fix memcpy tests
  mm: add cond_resched() in swapin_walk_pmd_entry()
  mm: do not show fs mm pc for VM_LOCKONFAULT pages
  selftests/vm: ksm_functional_tests: fixes for 32bit
  selftests/vm: cow: fix compile warning on 32bit
  selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions
  mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem
  mm,thp,rmap: fix races between updates of subpages_mapcount
  mm: memcg: fix swapcached stat accounting
  mm: add nodes= arg to memory.reclaim
  mm: disable top-tier fallback to reclaim on proactive reclaim
  selftests: cgroup: make sure reclaim target memcg is unprotected
  selftests: cgroup: refactor proactive reclaim code to reclaim_until()
  mm: memcg: fix stale protection of reclaim target memcg
  mm/mmap: properly unaccount memory on mas_preallocate() failure
  omfs: remove ->writepage
  jfs: remove ->writepage
  ...

Pull ARM updates from Russell King:

 - update unwinder to cope with module PLTs

 - enable UBSAN on ARM

 - improve kernel fault message

 - update UEFI runtime page tables dump

 - avoid clang's __aeabi_uldivmod generated in NWFPE code

 - disable FIQs on CPU shutdown paths

 - update XOR register usage

 - a number of build updates (using .arch, thread pointer, removal of
   lazy evaluation in Makefile)

 - conversion of stacktrace code to stackwalk

 - findbit assembly updates

 - hwcap feature updates for ARMv8 CPUs

 - instruction dump updates for big-endian platforms

 - support for function error injection

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits)
  ARM: 9279/1: support function error injection
  ARM: 9277/1: Make the dumped instructions are consistent with the disassembled ones
  ARM: 9276/1: Refactor dump_instr()
  ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA
  ARM: 9274/1: Add hwcap for Speculative Store Bypassing Safe
  ARM: 9273/1: Add hwcap for Speculation Barrier(SB)
  ARM: 9272/1: vfp: Add hwcap for FEAT_AA32I8MM
  ARM: 9271/1: vfp: Add hwcap for FEAT_AA32BF16
  ARM: 9270/1: vfp: Add hwcap for FEAT_FHM
  ARM: 9269/1: vfp: Add hwcap for FEAT_DotProd
  ARM: 9268/1: vfp: Add hwcap FPHP and ASIMDHP for FEAT_FP16
  ARM: 9267/1: Define Armv8 registers in AArch32 state
  ARM: findbit: add unwinder information
  ARM: findbit: operate by words
  ARM: findbit: convert to macros
  ARM: findbit: provide more efficient ARMv7 implementation
  ARM: findbit: document ARMv5 bit offset calculation
  ARM: 9259/1: stacktrace: Convert stacktrace to generic ARCH_STACKWALK
  ARM: 9258/1: stacktrace: Make stack walk callback consistent with generic code
  ARM: 9265/1: pass -march= only to compiler
  ...

Pull EFI updates from Ard Biesheuvel:
 "Another fairly sizable pull request, by EFI subsystem standards.

  Most of the work was done by me, some of it in collaboration with the
  distro and bootloader folks (GRUB, systemd-boot), where the main focus
  has been on removing pointless per-arch differences in the way EFI
  boots a Linux kernel.

   - Refactor the zboot code so that it incorporates all the EFI stub
     logic, rather than calling the decompressed kernel as a EFI app.

   - Add support for initrd= command line option to x86 mixed mode.

   - Allow initrd= to be used with arbitrary EFI accessible file systems
     instead of just the one the kernel itself was loaded from.

   - Move some x86-only handling and manipulation of the EFI memory map
     into arch/x86, as it is not used anywhere else.

   - More flexible handling of any random seeds provided by the boot
     environment (i.e., systemd-boot) so that it becomes available much
     earlier during the boot.

   - Allow improved arch-agnostic EFI support in loaders, by setting a
     uniform baseline of supported features, and adding a generic magic
     number to the DOS/PE header. This should allow loaders such as GRUB
     or systemd-boot to reduce the amount of arch-specific handling
     substantially.

   - (arm64) Run EFI runtime services from a dedicated stack, and use it
     to recover from synchronous exceptions that might occur in the
     firmware code.

   - (arm64) Ensure that we don't allocate memory outside of the 48-bit
     addressable physical range.

   - Make EFI pstore record size configurable

   - Add support for decoding CXL specific CPER records"

* tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (43 commits)
  arm64: efi: Recover from synchronous exceptions occurring in firmware
  arm64: efi: Execute runtime services from a dedicated stack
  arm64: efi: Limit allocations to 48-bit addressable physical region
  efi: Put Linux specific magic number in the DOS header
  efi: libstub: Always enable initrd command line loader and bump version
  efi: stub: use random seed from EFI variable
  efi: vars: prohibit reading random seed variables
  efi: random: combine bootloader provided RNG seed with RNG protocol output
  efi/cper, cxl: Decode CXL Error Log
  efi/cper, cxl: Decode CXL Protocol Error Section
  efi: libstub: fix efi_load_initrd_dev_path() kernel-doc comment
  efi: x86: Move EFI runtime map sysfs code to arch/x86
  efi: runtime-maps: Clarify purpose and enable by default for kexec
  efi: pstore: Add module parameter for setting the record size
  efi: xen: Set EFI_PARAVIRT for Xen dom0 boot on all architectures
  efi: memmap: Move manipulation routines into x86 arch tree
  efi: memmap: Move EFI fake memmap support into x86 arch tree
  efi: libstub: Undeprecate the command line initrd loader
  efi: libstub: Add mixed mode support to command line initrd loader
  efi: libstub: Permit mixed mode return types other than efi_status_t
  ...

Pull random number generator updates from Jason Donenfeld:

 - Replace prandom_u32_max() and various open-coded variants of it,
   there is now a new family of functions that uses fast rejection
   sampling to choose properly uniformly random numbers within an
   interval:

       get_random_u32_below(ceil) - [0, ceil)
       get_random_u32_above(floor) - (floor, U32_MAX]
       get_random_u32_inclusive(floor, ceil) - [floor, ceil]

   Coccinelle was used to convert all current users of
   prandom_u32_max(), as well as many open-coded patterns, resulting in
   improvements throughout the tree.

   I'll have a "late" 6.1-rc1 pull for you that removes the now unused
   prandom_u32_max() function, just in case any other trees add a new
   use case of it that needs to converted. According to linux-next,
   there may be two trivial cases of prandom_u32_max() reintroductions
   that are fixable with a 's/.../.../'. So I'll have for you a final
   conversion patch doing that alongside the removal patch during the
   second week.

   This is a treewide change that touches many files throughout.

 - More consistent use of get_random_canary().

 - Updates to comments, documentation, tests, headers, and
   simplification in configuration.

 - The arch_get_random*_early() abstraction was only used by arm64 and
   wasn't entirely useful, so this has been replaced by code that works
   in all relevant contexts.

 - The kernel will use and manage random seeds in non-volatile EFI
   variables, refreshing a variable with a fresh seed when the RNG is
   initialized. The RNG GUID namespace is then hidden from efivarfs to
   prevent accidental leakage.

   These changes are split into random.c infrastructure code used in the
   EFI subsystem, in this pull request, and related support inside of
   EFISTUB, in Ard's EFI tree. These are co-dependent for full
   functionality, but the order of merging doesn't matter.

 - Part of the infrastructure added for the EFI support is also used for
   an improvement to the way vsprintf initializes its siphash key,
   replacing an sleep loop wart.

 - The hardware RNG framework now always calls its correct random.c
   input function, add_hwgenerator_randomness(), rather than sometimes
   going through helpers better suited for other cases.

 - The add_latent_entropy() function has long been called from the fork
   handler, but is a no-op when the latent entropy gcc plugin isn't
   used, which is fine for the purposes of latent entropy.

   But it was missing out on the cycle counter that was also being mixed
   in beside the latent entropy variable. So now, if the latent entropy
   gcc plugin isn't enabled, add_latent_entropy() will expand to a call
   to add_device_randomness(NULL, 0), which adds a cycle counter,
   without the absent latent entropy variable.

 - The RNG is now reseeded from a delayed worker, rather than on demand
   when used. Always running from a worker allows it to make use of the
   CPU RNG on platforms like S390x, whose instructions are too slow to
   do so from interrupts. It also has the effect of adding in new inputs
   more frequently with more regularity, amounting to a long term
   transcript of random values. Plus, it helps a bit with the upcoming
   vDSO implementation (which isn't yet ready for 6.2).

 - The jitter entropy algorithm now tries to execute on many different
   CPUs, round-robining, in hopes of hitting even more memory latencies
   and other unpredictable effects. It also will mix in a cycle counter
   when the entropy timer fires, in addition to being mixed in from the
   main loop, to account more explicitly for fluctuations in that timer
   firing. And the state it touches is now kept within the same cache
   line, so that it's assured that the different execution contexts will
   cause latencies.

* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
  random: include <linux/once.h> in the right header
  random: align entropy_timer_state to cache line
  random: mix in cycle counter when jitter timer fires
  random: spread out jitter callback to different CPUs
  random: remove extraneous period and add a missing one in comments
  efi: random: refresh non-volatile random seed when RNG is initialized
  vsprintf: initialize siphash key using notifier
  random: add back async readiness notifier
  random: reseed in delayed work rather than on-demand
  random: always mix cycle counter in add_latent_entropy()
  hw_random: use add_hwgenerator_randomness() for early entropy
  random: modernize documentation comment on get_random_bytes()
  random: adjust comment to account for removed function
  random: remove early archrandom abstraction
  random: use random.trust_{bootloader,cpu} command line option only
  stackprotector: actually use get_random_canary()
  stackprotector: move get_random_canary() into stackprotector.h
  treewide: use get_random_u32_inclusive() when possible
  treewide: use get_random_u32_{above,below}() instead of manual loop
  treewide: use get_random_u32_below() instead of deprecated function
  ...

Linux 6.1-rc8

This enables HAVE_FUNCTION_ERROR_INJECTION by adding necessary
regs_set_return_value() and override_function_with_return().

Simply tested according to Documentation/fault-injection/fault-injection.rst.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Floating point half-precision (FPHP) and Advanced SIMD half-precision
(ASIMDHP) are VFP features (FEAT_FP16) represented by MVFR1 identification register. These capabilities can optionally exist with VFPv3 and mandatory with VFPv4. Both these new features exist for Armv8 architecture in AArch32 state.

These hwcaps may be useful for the userspace to add conditional check
before trying to use FEAT_FP16 feature specific instructions.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

AArch32 Instruction Set Attribute Register 6 (ID_ISAR6_EL1) and AArch32
Processor Feature Register 2 (ID_PFR2_EL1) identifies some new features
for the Armv8 architecture. This registers will be utilized to add
hwcaps for those cpu features.

These registers are marked as reserved for Armv7 and should be a RAZ.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>