linux-stable.git/arch/arm/include/asm, branch v5.8

ARM: percpu.h: fix build error

2020-07-30T20:01:04+00:00

Fix build error for the case:
  defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6)

config: keystone_defconfig

  CC      arch/arm/kernel/signal.o
  In file included from ../include/linux/random.h:14,
                    from ../arch/arm/kernel/signal.c:8:
  ../arch/arm/include/asm/percpu.h: In function ‘__my_cpu_offset’:
  ../arch/arm/include/asm/percpu.h:29:34: error: ‘current_stack_pointer’ undeclared (first use in this function); did you mean ‘user_stack_pointer’?
      : "Q" (*(const unsigned long *)current_stack_pointer));
                                     ^~~~~~~~~~~~~~~~~~~~~
                                     user_stack_pointer

Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity")
Signed-off-by: Grygorii Strashko 
Signed-off-by: Linus Torvalds

efi/libstub: arm: Print CPU boot mode and MMU state at boot

2020-06-17T13:29:11+00:00

On 32-bit ARM, we may boot at HYP mode, or with the MMU and caches off
(or both), even though the EFI spec does not actually support this.
While booting at HYP mode is something we might tolerate, fiddling
with the caches is a more serious issue, as disabling the caches is
tricky to do safely from C code, and running without the Dcache makes
it impossible to support unaligned memory accesses, which is another
explicit requirement imposed by the EFI spec.

So take note of the CPU mode and MMU state in the EFI stub diagnostic
output so that we can easily diagnose any issues that may arise from
this. E.g.,

  EFI stub: Entering in SVC mode with MMU enabled

Also, capture the CPSR and SCTLR system register values at EFI stub
entry, and after ExitBootServices() returns, and check whether the
MMU and Dcache were disabled at any point. If this is the case, a
diagnostic message like the following will be emitted:

  efi: [Firmware Bug]: EFI stub was entered with MMU and Dcache disabled, please fix your firmware!
  efi: CPSR at EFI stub entry        : 0x600001d3
  efi: SCTLR at EFI stub entry       : 0x00c51838
  efi: CPSR after ExitBootServices() : 0x600001d3
  efi: SCTLR after ExitBootServices(): 0x00c50838

Signed-off-by: Ard Biesheuvel 
Reviewed-by: Leif Lindholm

mm: consolidate pte_index() and pte_offset_*() definitions

2020-06-09T16:39:14+00:00

All architectures define pte_index() as

	(address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)

and all architectures define pte_offset_kernel() as an entry in the array
of PTEs indexed by the pte_index().

For the most architectures the pte_offset_kernel() implementation relies
on the availability of pmd_page_vaddr() that converts a PMD entry value to
the virtual address of the page containing PTEs array.

Let's move x86 definitions of the PTE accessors to the generic place in
 and then simply drop the respective definitions from the
other architectures.

The architectures that didn't provide pmd_page_vaddr() are updated to have
that defined.

The generic implementation of pte_offset_kernel() can be overridden by an
architecture and alpha makes use of this because it has special ordering
requirements for its version of pte_offset_kernel().

[rppt@linux.ibm.com: v2]
  Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org
[rppt@linux.ibm.com: update]
  Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org
[rppt@linux.ibm.com: update]
  Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org
[akpm@linux-foundation.org: fix x86 warning]
[sfr@canb.auug.org.au: fix powerpc build]
  Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com

Signed-off-by: Mike Rapoport 
Signed-off-by: Stephen Rothwell 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org
Signed-off-by: Linus Torvalds

mm: reorder includes after introduction of linux/pgtable.h

2020-06-09T16:39:13+00:00

The replacement of  with  made the include
of the latter in the middle of asm includes.  Fix this up with the aid of
the below script and manual adjustments here and there.

	import sys
	import re

	if len(sys.argv) is not 3:
	    print "USAGE: %s  " % (sys.argv[0])
	    sys.exit(1)

	hdr_to_move="#include " % sys.argv[2]
	moved = False
	in_hdrs = False

	with open(sys.argv[1], "r") as f:
	    lines = f.readlines()
	    for _line in lines:
		line = _line.rstrip('
')
		if line == hdr_to_move:
		    continue
		if line.startswith("#include 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds

mm: introduce include/linux/pgtable.h

2020-06-09T16:39:13+00:00

The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds

arm: add loglvl to unwind_backtrace()

2020-06-09T16:39:10+00:00

Currently, the log-level of show_stack() depends on a platform
realization.  It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).

Furthermore, it forces the logic decision from user to an architecture
side.  In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages.  And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.

Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers.  Also, it will consolidate
printings with headers.

Add log level argument to unwind_backtrace() as a preparation for
introducing show_stack_loglvl().

As a good side-effect arm_syscall() is now printing errors with the same
log level as the backtrace.

[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u

Signed-off-by: Dmitry Safonov 
Signed-off-by: Andrew Morton 
Cc: Russell King 
Cc: Will Deacon 
Link: http://lkml.kernel.org/r/20200418201944.482088-6-dima@arista.com
Signed-off-by: Linus Torvalds

arm/asm: add loglvl to c_backtrace()

2020-06-09T16:39:10+00:00

Currently, the log-level of show_stack() depends on a platform
realization.  It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).

Furthermore, it forces the logic decision from user to an architecture
side.  In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages.  And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.

Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers.  Also, it will consolidate
printings with headers.

Add log level argument to c_backtrace() as a preparation for introducing
show_stack_loglvl().

[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u

Signed-off-by: Dmitry Safonov 
Signed-off-by: Andrew Morton 
Cc: Russell King 
Cc: Will Deacon 
Link: http://lkml.kernel.org/r/20200418201944.482088-5-dima@arista.com
Signed-off-by: Linus Torvalds

arm: rename flush_cache_user_range to flush_icache_user_range

2020-06-08T18:05:58+00:00

flush_icache_user_range will be the name for a generic primitive.  Move
the arm name so that arm already has an implementation.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Cc: Russell King 
Link: http://lkml.kernel.org/r/20200515143646.3857579-24-hch@lst.de
Signed-off-by: Linus Torvalds

arm,sparc,unicore32: remove flush_icache_user_range

2020-06-08T18:05:57+00:00

flush_icache_user_range is only used by , so
remove it from the architectures that implement it, but don't use
.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Cc: Russell King 
Cc: "David S. Miller" 
Cc: Guan Xuetao 
Link: http://lkml.kernel.org/r/20200515143646.3857579-19-hch@lst.de
Signed-off-by: Linus Torvalds

kmap: consolidate kmap_prot definitions

2020-06-05T02:06:22+00:00

Most architectures define kmap_prot to be PAGE_KERNEL.

Let sparc and xtensa define there own and define PAGE_KERNEL as the
default if not overridden.

[akpm@linux-foundation.org: coding style fixes]
Suggested-by: Christoph Hellwig 
Signed-off-by: Ira Weiny 
Signed-off-by: Andrew Morton 
Cc: Al Viro 
Cc: Andy Lutomirski 
Cc: Benjamin Herrenschmidt 
Cc: Borislav Petkov 
Cc: Christian König 
Cc: Chris Zankel 
Cc: Daniel Vetter 
Cc: Dan Williams 
Cc: Dave Hansen 
Cc: "David S. Miller" 
Cc: Helge Deller 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: "James E.J. Bottomley" 
Cc: Max Filippov 
Cc: Paul Mackerras 
Cc: Peter Zijlstra 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20200507150004.1423069-16-ira.weiny@intel.com
Signed-off-by: Linus Torvalds