linux-stable.git/arch/arm/crypto, branch v5.2

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Enrico Weigelt 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman

crypto: shash - remove shash_desc::flags

2019-04-25T07:38:12+00:00

The flags field in 'struct shash_desc' never actually does anything.
The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP.
However, no shash algorithm ever sleeps, making this flag a no-op.

With this being the case, inevitably some users who can't sleep wrongly
pass MAY_SLEEP.  These would all need to be fixed if any shash algorithm
actually started sleeping.  For example, the shash_ahash_*() functions,
which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP
from the ahash API to the shash API.  However, the shash functions are
called under kmap_atomic(), so actually they're assumed to never sleep.

Even if it turns out that some users do need preemption points while
hashing large buffers, we could easily provide a helper function
crypto_shash_update_large() which divides the data into smaller chunks
and calls crypto_shash_update() and cond_resched() for each chunk.  It's
not necessary to have a flag in 'struct shash_desc', nor is it necessary
to make individual shash algorithms aware of this at all.

Therefore, remove shash_desc::flags, and document that the
crypto_shash_*() functions can be called from any context.

Signed-off-by: Eric Biggers 
Signed-off-by: Herbert Xu

crypto: arm/aes-neonbs - don't access already-freed walk.iv

2019-04-18T14:14:58+00:00

If the user-provided IV needs to be aligned to the algorithm's
alignmask, then skcipher_walk_virt() copies the IV into a new aligned
buffer walk.iv.  But skcipher_walk_virt() can fail afterwards, and then
if the caller unconditionally accesses walk.iv, it's a use-after-free.

arm32 xts-aes-neonbs doesn't set an alignmask, so currently it isn't
affected by this despite unconditionally accessing walk.iv.  However
this is more subtle than desired, and it was actually broken prior to
the alignmask being removed by commit cc477bf64573 ("crypto: arm/aes -
replace bit-sliced OpenSSL NEON code").  Thus, update xts-aes-neonbs to
start checking the return value of skcipher_walk_virt().

Fixes: e4e7f10bfc40 ("ARM: add support for bit sliced AES using NEON instructions")
Cc:  # v3.13+
Signed-off-by: Eric Biggers 
Signed-off-by: Herbert Xu

crypto: arm - convert to use crypto_simd_usable()

2019-03-22T12:57:27+00:00

Replace all calls to may_use_simd() in the arm crypto code with
crypto_simd_usable(), in order to allow testing the no-SIMD code paths.

Signed-off-by: Eric Biggers 
Reviewed-by: Ard Biesheuvel 
Signed-off-by: Herbert Xu

Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2019-03-05T17:09:55+00:00

Pull crypto update from Herbert Xu:
 "API:
   - Add helper for simple skcipher modes.
   - Add helper to register multiple templates.
   - Set CRYPTO_TFM_NEED_KEY when setkey fails.
   - Require neither or both of export/import in shash.
   - AEAD decryption test vectors are now generated from encryption
     ones.
   - New option CONFIG_CRYPTO_MANAGER_EXTRA_TESTS that includes random
     fuzzing.

  Algorithms:
   - Conversions to skcipher and helper for many templates.
   - Add more test vectors for nhpoly1305 and adiantum.

  Drivers:
   - Add crypto4xx prng support.
   - Add xcbc/cmac/ecb support in caam.
   - Add AES support for Exynos5433 in s5p.
   - Remove sha384/sha512 from artpec7 as hardware cannot do partial
     hash"

[ There is a merge of the Freescale SoC tree in order to pull in changes
  required by patches to the caam/qi2 driver. ]

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (174 commits)
  crypto: s5p - add AES support for Exynos5433
  dt-bindings: crypto: document Exynos5433 SlimSSS
  crypto: crypto4xx - add missing of_node_put after of_device_is_available
  crypto: cavium/zip - fix collision with generic cra_driver_name
  crypto: af_alg - use struct_size() in sock_kfree_s()
  crypto: caam - remove redundant likely/unlikely annotation
  crypto: s5p - update iv after AES-CBC op end
  crypto: x86/poly1305 - Clear key material from stack in SSE2 variant
  crypto: caam - generate hash keys in-place
  crypto: caam - fix DMA mapping xcbc key twice
  crypto: caam - fix hash context DMA unmap size
  hwrng: bcm2835 - fix probe as platform device
  crypto: s5p-sss - Use AES_BLOCK_SIZE define instead of number
  crypto: stm32 - drop pointless static qualifier in stm32_hash_remove()
  crypto: chelsio - Fixed Traffic Stall
  crypto: marvell - Remove set but not used variable 'ivsize'
  crypto: ccp - Update driver messages to remove some confusion
  crypto: adiantum - add 1536 and 4096-byte test vectors
  crypto: nhpoly1305 - add a test vector with len % 16 != 0
  crypto: arm/aes-ce - update IV after partial final CTR block
  ...

crypto: arm/aes-ce - update IV after partial final CTR block

2019-02-22T04:47:27+00:00

Make the arm ctr-aes-ce algorithm update the IV buffer to contain the
next counter after processing a partial final block, rather than leave
it as the last counter.  This makes ctr-aes-ce pass the updated AES-CTR
tests.  This change also makes the code match the arm64 version in
arch/arm64/crypto/aes-modes.S more closely.

Signed-off-by: Eric Biggers 
Signed-off-by: Herbert Xu

crypto: sha512/arm - fix crash bug in Thumb2 build

2019-02-22T04:40:56+00:00

The SHA512 code we adopted from the OpenSSL project uses a rather
peculiar way to take the address of the round constant table: it
takes the address of the sha256_block_data_order() routine, and
substracts a constant known quantity to arrive at the base of the
table, which is emitted by the same assembler code right before
the routine's entry point.

However, recent versions of binutils have helpfully changed the
behavior of references emitted via an ADR instruction when running
in Thumb2 mode: it now takes the Thumb execution mode bit into
account, which is bit 0 af the address. This means the produced
table address also has bit 0 set, and so we end up with an address
value pointing 1 byte past the start of the table, which results
in crashes such as

  Unable to handle kernel paging request at virtual address bf825000
  pgd = 42f44b11
  [bf825000] *pgd=80000040206003, *pmd=5f1bd003, *pte=00000000
  Internal error: Oops: 207 [#1] PREEMPT SMP THUMB2
  Modules linked in: sha256_arm(+) sha1_arm_ce sha1_arm ...
  CPU: 7 PID: 396 Comm: cryptomgr_test Not tainted 5.0.0-rc6+ #144
  Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
  PC is at sha256_block_data_order+0xaaa/0xb30 [sha256_arm]
  LR is at __this_module+0x17fd/0xffffe800 [sha256_arm]
  pc : []    lr : []    psr: 800b0033
  sp : ebc8bbe8  ip : faaabe1c  fp : 2fdd3433
  r10: 4c5f1692  r9 : e43037df  r8 : b04b0a5a
  r7 : c369d722  r6 : 39c3693e  r5 : 7a013189  r4 : 1580d26b
  r3 : 8762a9b0  r2 : eea9c2cd  r1 : 3e9ab536  r0 : 1dea4ae7
  Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA Thumb  Segment user
  Control: 70c5383d  Table: 6b8467c0  DAC: dbadc0de
  Process cryptomgr_test (pid: 396, stack limit = 0x69e1fe23)
  Stack: (0xebc8bbe8 to 0xebc8c000)
  ...
  unwind: Unknown symbol address bf820bca
  unwind: Index not found bf820bca
  Code: 441a ea80 40f9 440a (f85e) 3b04
  ---[ end trace e560cce92700ef8a ]---

Given that this affects older kernels as well, in case they are built
with a recent toolchain, apply a minimal backportable fix, which is
to emit another non-code label at the start of the routine, and
reference that instead. (This is similar to the current upstream state
of this file in OpenSSL)

Signed-off-by: Ard Biesheuvel 
Signed-off-by: Herbert Xu

crypto: sha256/arm - fix crash bug in Thumb2 build

2019-02-22T04:40:56+00:00

The SHA256 code we adopted from the OpenSSL project uses a rather
peculiar way to take the address of the round constant table: it
takes the address of the sha256_block_data_order() routine, and
substracts a constant known quantity to arrive at the base of the
table, which is emitted by the same assembler code right before
the routine's entry point.

However, recent versions of binutils have helpfully changed the
behavior of references emitted via an ADR instruction when running
in Thumb2 mode: it now takes the Thumb execution mode bit into
account, which is bit 0 af the address. This means the produced
table address also has bit 0 set, and so we end up with an address
value pointing 1 byte past the start of the table, which results
in crashes such as

  Unable to handle kernel paging request at virtual address bf825000
  pgd = 42f44b11
  [bf825000] *pgd=80000040206003, *pmd=5f1bd003, *pte=00000000
  Internal error: Oops: 207 [#1] PREEMPT SMP THUMB2
  Modules linked in: sha256_arm(+) sha1_arm_ce sha1_arm ...
  CPU: 7 PID: 396 Comm: cryptomgr_test Not tainted 5.0.0-rc6+ #144
  Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
  PC is at sha256_block_data_order+0xaaa/0xb30 [sha256_arm]
  LR is at __this_module+0x17fd/0xffffe800 [sha256_arm]
  pc : []    lr : []    psr: 800b0033
  sp : ebc8bbe8  ip : faaabe1c  fp : 2fdd3433
  r10: 4c5f1692  r9 : e43037df  r8 : b04b0a5a
  r7 : c369d722  r6 : 39c3693e  r5 : 7a013189  r4 : 1580d26b
  r3 : 8762a9b0  r2 : eea9c2cd  r1 : 3e9ab536  r0 : 1dea4ae7
  Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA Thumb  Segment user
  Control: 70c5383d  Table: 6b8467c0  DAC: dbadc0de
  Process cryptomgr_test (pid: 396, stack limit = 0x69e1fe23)
  Stack: (0xebc8bbe8 to 0xebc8c000)
  ...
  unwind: Unknown symbol address bf820bca
  unwind: Index not found bf820bca
  Code: 441a ea80 40f9 440a (f85e) 3b04
  ---[ end trace e560cce92700ef8a ]---

Given that this affects older kernels as well, in case they are built
with a recent toolchain, apply a minimal backportable fix, which is
to emit another non-code label at the start of the routine, and
reference that instead. (This is similar to the current upstream state
of this file in OpenSSL)

Signed-off-by: Ard Biesheuvel 
Signed-off-by: Herbert Xu

crypto: arm/crct10dif-ce - cleanup and optimizations

2019-02-08T07:29:48+00:00

The x86, arm, and arm64 asm implementations of crct10dif are very
difficult to understand partly because many of the comments, labels, and
macros are named incorrectly: the lengths mentioned are usually off by a
factor of two from the actual code.  Many other things are unnecessarily
convoluted as well, e.g. there are many more fold constants than
actually needed and some aren't fully reduced.

This series therefore cleans up all these implementations to be much
more maintainable.  I also made some small optimizations where I saw
opportunities, resulting in slightly better performance.

This patch cleans up the arm version.

(Also moved the constants to .rodata as suggested by Ard Biesheuvel.)

Acked-by: Ard Biesheuvel 
Signed-off-by: Eric Biggers 
Signed-off-by: Herbert Xu