Pull ARM updates from Russell King:

 - Correct ARMs dma-mapping to use the correct printk format strings.

 - Avoid defining OBJCOPYFLAGS globally which upsets lkdtm rodata
   testing.

 - Cleanups to ARMs asm/memory.h include.

 - L2 cache cleanups.

 - Allow flat nommu binaries to be executed on ARM MMU systems.

 - Kernel hardening - add more read-only after init annotations,
   including making some kernel vdso variables const.

 - Ensure AMBA primecell clocks are appropriately defaulted.

 - ARM breakpoint cleanup.

 - Various StrongARM 11x0 and companion chip (SA1111) updates to bring
   this legacy platform to use more modern APIs for (eg) GPIOs and
   interrupts, which will allow us in the future to reduce some of the
   board-level driver clutter and elimate function callbacks into board
   code via platform data. There still appears to be interest in these
   platforms!

 - Remove the now redundant secure_flush_area() API.

 - Module PLT relocation optimisations. Ard says: This series of 4
   patches optimizes the ARM PLT generation code that is invoked at
   module load time, to get rid of the O(n^2) algorithm that results in
   pathological load times of 10 seconds or more for large modules on
   certain STB platforms.

 - ARMv7M cache maintanence support.

 - L2 cache PMU support

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (35 commits)
  ARM: sa1111: provide to_sa1111_device() macro
  ARM: sa1111: add sa1111_get_irq()
  ARM: sa1111: clean up duplication in IRQ chip implementation
  ARM: sa1111: implement a gpio_chip for SA1111 GPIOs
  ARM: sa1111: move irq cleanup to separate function
  ARM: sa1111: use devm_clk_get()
  ARM: sa1111: use devm_kzalloc()
  ARM: sa1111: ensure we only touch RAB bus type devices when removing
  ARM: 8611/1: l2x0: add PMU support
  ARM: 8610/1: V7M: Add dsb before jumping in handler mode
  ARM: 8609/1: V7M: Add support for the Cortex-M7 processor
  ARM: 8608/1: V7M: Indirect proc_info construction for V7M CPUs
  ARM: 8607/1: V7M: Wire up caches for V7M processors with cache support.
  ARM: 8606/1: V7M: introduce cache operations
  ARM: 8605/1: V7M: fix notrace variant of save_and_disable_irqs
  ARM: 8604/1: V7M: Add support for reading the CTR with read_cpuid_cachetype()
  ARM: 8603/1: V7M: Add addresses for mem-mapped V7M cache operations
  ARM: 8602/1: factor out CSSELR/CCSIDR operations that use cp15 directly
  ARM: kernel: avoid brute force search on PLT generation
  ARM: kernel: sort relocation sections before allocating PLTs
  ...

Pull char/misc driver updates from Greg KH:
 "Here's the "big" char and misc driver update for 4.9-rc1.

  Lots of little things here, all over the driver tree for subsystems
  that flow through me. Nothing major that I can discern, full details
  are in the shortlog.

  All have been in the linux-next tree with no reported issues"

* tag 'char-misc-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (144 commits)
  drivers/misc/hpilo: Changes to support new security states in iLO5 FW
  at25: fix debug and error messaging
  misc/genwqe: ensure zero initialization
  vme: fake: remove unexpected unlock in fake_master_set()
  vme: fake: mark symbols static where possible
  spmi: pmic-arb: Return an error code if sanity check fails
  Drivers: hv: get rid of id in struct vmbus_channel
  Drivers: hv: make VMBus bus ids persistent
  mcb: Add a dma_device to mcb_device
  mcb: Enable PCI bus mastering by default
  mei: stop the stall timer worker if not needed
  clk: probe common clock drivers earlier
  vme: fake: fix build for 64-bit dma_addr_t
  ttyprintk: Neaten and simplify printing
  mei: me: add kaby point device ids
  coresight: tmc: mark symbols static where possible
  coresight: perf: deal with error condition properly
  Drivers: hv: hv_util: Avoid dynamic allocation in time synch
  fpga manager: Add hardware dependency to Zynq driver
  Drivers: hv: utils: Support TimeSync version 4.0 protocol samples.
  ...

Provide a nicer to_sa1111_device macro to convert a struct device to a
sa1111_dev.  We will need this for drivers when converting them to
dev_pm_ops, or removing shutdown methods.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Add a helper function to get the irq number for a device.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Clean up the duplication in the IRQ chip implementation - we can compute
the register address from the interrupt number rather than duplicating
the code for each register.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Add a gpio_chip instance for SA1111 GPIOs.  This allows us to use
gpiolib to lookup and manipulate SA1111 GPIOs.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Move the SA1111 interrupt cleanup to a separate function, so it can be
re-used in the probe error cleanup path.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Convert sa1111 to use devm_clk_get() to get its clock resource, and
strip out the clk_put() calls.  This simplifies the error handling
a little.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Use devm_kzalloc() to allocate our driver data, so we can eliminate its
kfree() from the device removal and error cleanup paths.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

When removing a SA1111 device, we try to remove all child devices.
However, we must only remove our own RAB bus typed devices from the
tree, there may be other devices present which should not be touched.

This is necessary before we introduce gpiochip to SA1111 to avoid
incorrectly trying to remove the gpiochip device, leading to an oops
in __release_resource().

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>