Fix for occasional boot hang for am335x USB

A fix for occasional boot hang for am335x USB that I've only recently
started noticing.

This can be merged naturally whenever suitable. This issue has been seen
with other similar SoCs earlier and has clearly existed for a long time.

* tag 'am3-usb-hang-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Fix occasional boot hang for am3 usb

Link: https://lore.kernel.org/r/pull-1703071616-395333@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Fixes for omaps

A few fixes for omaps:

- A regression fix for ti-sysc interconnect target module driver to not access
  registers after reset if srst_udelay quirk is needed

- DRA7 L3 NoC node register size fix

* tag 'omap-for-v6.7/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Fix null pointer dereference and memory leak in omap_soc_device_init
  ARM: dts: dra7: Fix DRA7 L3 NoC node register size
  bus: ti-sysc: Flush posted write only after srst_udelay

Link: https://lore.kernel.org/r/pull-1702037799-781982@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

With subtle timings changes, we can now sometimes get an external abort on
non-linefetch error booting am3 devices at sysc_reset(). This is because
of a missing reset delay needed for the usb target module.

Looks like we never enabled the delay earlier for am3, although a similar
issue was seen earlier with a similar usb setup for dm814x as described in
commit ebf244148092 ("ARM: OMAP2+: Use srst_udelay for USB on dm814x").

Cc: stable@vger.kernel.org
Fixes: 0782e8572ce4 ("ARM: dts: Probe am335x musb with ti-sysc")
Signed-off-by: Tony Lindgren <tony@atomide.com>

Devicetree fixes for the 6.7-cycle.

All over the place this time. From adapting the size of the vdec nodes
on rk3328 and rk3399, fixing some wrong pinctrl settings on rk3128 and
the Turing RK1 board, emmc-settings fixes on rk3588 and interrupt-name
mishaps, down to some dt-cleanups.

Also this adds the missing rockchip,rk3588-pmugrf compatible to the soc
grf binding, that I somehow messed up during the pull requests for the
-rc1 . At least with it included the dt-checker is happier.

* tag 'v6.7-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588
  arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru
  arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi
  arm64: dts: rockchip: Fix Turing RK1 interrupt pinctrls
  ARM: dts: rockchip: Fix sdmmc_pwren's pinmux setting for RK3128
  arm64: dts: rockchip: minor whitespace cleanup around '='
  ARM: dts: rockchip: minor whitespace cleanup around '='
  dt-bindings: soc: rockchip: grf: add rockchip,rk3588-pmugrf
  arm64: dts: rockchip: fix rk356x pcie msg interrupt name
  arm64: dts: rockchip: Expand reg size of vdec node for RK3399
  arm64: dts: rockchip: Expand reg size of vdec node for RK3328

Link: https://lore.kernel.org/r/2709704.mvXUDI8C0e@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX fixes for 6.7:

- A MAINTAINERS update to reinstate freescale ARM64 DT directory in i.MX
  entry.
- A series from Alexander Stein to fix #pwm-cells for imx8-ss.
- A series from Haibo Chen to fix GPIO node name for i.MX93 and
  i.MX8ULP.
- Add parkmode-disable-ss-quirk for DWC3 on i.MX8MP and i.MX8MQ to fix
  an issue that the controller may hang when processing transactions
  under heavy USB traffic from multiple endpoints.
- Fix mediamix block power on/off for i.MX93 by correcting the power
  domain clock to be 'nic_media'.
- A couple of Ethernet PHY clock regression fixes for imx6ul-pico and
  imx6q-skov board.
- Fix edma3 power domain for i.MX8QM to fix a panic during startup
  process.

* tag 'imx-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx28-xea: Pass the 'model' property
  ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt
  MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry
  arm64: dts: imx8-apalis: set wifi regulator to always-on
  ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init
  arm64: dts: imx8ulp: update gpio node name to align with register address
  arm64: dts: imx93: update gpio node name to align with register address
  arm64: dts: imx93: correct mediamix power
  arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup
  arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells
  arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells
  dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles
  ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock
  arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3
  ARM: dts: imx6q: skov: fix ethernet clock regression
  arm64: dt: imx93: tqma9352-mba93xxla: Fix LPUART2 pad config

Link: https://lore.kernel.org/r/20231207005202.GF270430@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Per root-node.yaml, 'model' is a required property.

Pass it to fix the following dt-schema warning:

imx28-xea.dtb: /: 'model' is a required property
	from schema $id: http://devicetree.org/schemas/root-node.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Fixes: 445ae16ac1c5 ("ARM: dts: imx28: Add DTS description of imx28 based XEA board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The timer nodes declare compatibility with "fsl,imx6sx-gpt", which
itself is compatible with "fsl,imx6dl-gpt". Switch the fallback
compatible from "fsl,imx6sx-gpt" to "fsl,imx6dl-gpt".

Fixes: 949673450291 ("ARM: dts: add imx7d soc dtsi file")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Since commit c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK
specific PHY fixup")thet Ethernet PHY is no longer configured via code
in board file.

This caused Ethernet to stop working.

Fix this problem by describing the clocks and clock-names to the
Ethernet PHY node so that the KSZ8081 chip can be clocked correctly.

Fixes: c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This node can access any part of the L3 configuration registers space,
including CLK1 and CLK2 which are 0x800000 offset. Restore this area
size to include these areas.

Fixes: 7f2659ce657e ("ARM: dts: Move dra7 l3 noc to a separate node")
Signed-off-by: Andrew Davis <afd@ti.com>
Message-ID: <20231113181604.546444-1-afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The LED ACT which is included from bcm2711-rpi-4-b doesn't exists
on the Raspberry Pi 400. So the bcm2711-rpi-400.dts tries to
use the delete-node directive in order to remove the complete
node. Unfortunately the usage get broken in commit 1156e3a78bcc
("ARM: dts: bcm283x: Move ACT LED into separate dtsi")
and now ACT and PWR LED using the same GPIO and this prevent
probing of led-gpios on Raspberry Pi 400:

    leds-gpio: probe of leds failed with error -16

So fix the delete-node directive.

Fixes: 1156e3a78bcc ("ARM: dts: bcm283x: Move ACT LED into separate dtsi")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231118124252.14838-3-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>