linux-stable.git/arch/arm/boot, branch v6.3.2

ARM: dts: stm32: fix spi1 pin assignment on stm32mp15

2023-05-11T14:17:03+00:00

[ Upstream commit 1b9f0ec81af0012aae30aa3b4c711ad71d42e246 ]

Bank A and B IOs can't be handled by the pin controller 'Z'. This patch
assign spi1 pin definition to the correct controller.

Fixes: 9ad65d245b7b ("ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group")

Signed-off-by: Alexandre Torgue 
Signed-off-by: Sasha Levin

ARM: dts: gta04: fix excess dma channel usage

2023-05-11T14:17:03+00:00

[ Upstream commit a622310f7f0185da02e42cdb06475f533efaae60 ]

OMAP processors support 32 channels but there is no check or
inspect this except booting a device and looking at dmesg reports
of not available channels.

Recently some more subsystems with DMA (aes1+2) were added filling
the list of dma channels beyond the limit of 32 (even if other
parameters indicate 96 or 128 channels). This leads to random
subsystem failures i(e.g. mcbsp for audio) after boot or boot
messages that DMA can not be initialized.

Another symptom is that

/sys/kernel/debug/dmaengine/summary

has 32 entries and does not show all required channels.

Fix by disabling unused (on the GTA04 hardware) mcspi1...4.
Each SPI channel allocates 4 DMA channels rapidly filling
the available ones.

Disabling unused SPI modules on the OMAP3 SoC may also save
some energy (has not been checked).

Fixes: c312f066314e ("ARM: dts: omap3: Migrate AES from hwmods to sysc-omap2")
Signed-off-by: H. Nikolaus Schaller 
[re-enabled aes2, improved commit subject line]
Signed-off-by: Andreas Kemnade 
Message-Id: <20230113211151.2314874-1-andreas@kemnade.info>
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin

ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP node

2023-05-11T14:17:01+00:00

[ Upstream commit 3b76b736cd9933ff88764ffec01cbd859c1475e7 ]

Unit address of PCIe EP node should be 0x1c00000 as it has to match the
first address specified in the reg property.

This also requires sorting the node in the ascending order.

Fixes: e6b69813283f ("ARM: dts: qcom: sdx55: Add support for PCIe EP")
Reviewed-by: Konrad Dybcio 
Signed-off-by: Manivannan Sadhasivam 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20230308082424.140224-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin

ARM: dts: qcom: ipq8064: Fix the PCI I/O port range

2023-05-11T14:17:01+00:00

[ Upstream commit 0b16b34e491629016109e56747ad64588074194b ]

For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI addresses
(0x0fe00000, 0x31e00000, 0x35e00000) specified in the ranges property for
I/O region.

While at it, let's use the missing 0x prefix for the addresses.

Fixes: 93241840b664 ("ARM: dts: qcom: Add pcie nodes for ipq8064")
Reported-by: Arnd Bergmann 
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam 
Reviewed-by: Arnd Bergmann 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20230228164752.55682-17-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin

ARM: dts: qcom: ipq4019: Fix the PCI I/O port range

2023-05-11T14:17:01+00:00

[ Upstream commit 2540279e9a9e74fc880d1e4c83754ecfcbe290a0 ]

For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI address
(0x40200000) specified in the ranges property for I/O region.

While at it, let's use the missing 0x prefix for the addresses.

Fixes: 187519403273 ("ARM: dts: ipq4019: Add a few peripheral nodes")
Reported-by: Arnd Bergmann 
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam 
Reviewed-by: Arnd Bergmann 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20230228164752.55682-16-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin

ARM: dts: qcom-apq8064: Fix opp table child name

2023-05-11T14:16:59+00:00

[ Upstream commit b9745c275246a7e43c34d1b3be5ff9a9f3cf9305 ]

The opp-320000000 name is rather misleading with the opp-hz value
of 450 MHz. Fix it!

Fixes: 8db0b6c7b636 ("ARM: dts: qcom: apq8064: Convert adreno from legacy gpu-pwrlevels to opp-v2")
Signed-off-by: Konrad Dybcio 
Reviewed-by: David Heidelberg 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20230220120831.1591820-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin

Merge tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes

2023-04-14T11:51:43+00:00

Lower sd card speeds for two boards to make them run more reliable,
missing 32k clock definition for Anbric xx3 devices, missing cache-levels
for rk3588, fixed rk3326-board display supplies and more dt-schema fixes.

* tag 'v6.3-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: correct panel supplies on some rk3326 boards
  arm64: dts: rockchip: use just "port" in panel on RockPro64
  arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
  arm64: dts: rockchip: Remove non-existing pwm-delay-us property
  arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
  arm64: dts: rockchip: add rk3588 cache level information
  arm64: dts: rockchip: Lower SD card speed on rk3399 Pinebook Pro
  arm64: dts: rockchip: Lower sd speed on rk3566-soquartz
  ARM: dts: rockchip: fix a typo error for rk3288 spdif node
  arm64: dts: rockchip: Fix rk3399 GICv3 ITS node name

Link: https://lore.kernel.org/r/10559306.CDJkKcVGEf@phil
Signed-off-by: Arnd Bergmann

Merge tag 'imx-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

2023-04-06T08:18:41+00:00

i.MX fixes for 6.3, 2nd round:

- Fix 'reg' address length for i.MX8MP LCDIF2 device.
- A couple of changes from Fabio Estevam to fix DTC warnings caused
  unnecessary address/size cells.
- Re-enable PCI driver support in imx_v6_v7_defconfig.
- Fix PMIC clock source property for imx8mm-evk board.
- A couple of fixes from Peng Fan to correct off-on delay property for
  i.MX8 Verdin boards.

* tag 'imx-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI
  ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells
  ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells
  arm64: dts: imx8mp-verdin: correct off-on-delay
  arm64: dts: imx8mm-verdin: correct off-on-delay
  arm64: dts: imx8mm-evk: correct pmic clock source
  arm64: dts: imx8mp: fix address length for LCDIF2

Link: https://lore.kernel.org/r/20230406021602.GP11367@dragon
Signed-off-by: Arnd Bergmann

ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells

2023-04-05T14:31:31+00:00

Building with W=1 leads to the following dtc warning:

arch/arm/boot/dts/imx6ull-colibri.dtsi:36.9-46.5: Warning (graph_child_address): /connector/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary

Since a single port is used, 'ports' can be removed, as well as the
unnecessary #address-cells/#size-cells.

Fixes: bd5880e10982 ("ARM: dts: colibri-imx6ull: Enable dual-role switching")
Signed-off-by: Fabio Estevam 
Signed-off-by: Shawn Guo

ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells

2023-04-05T14:31:14+00:00

Building with W=1 leads to the following dtc warning:

arch/arm/boot/dts/imx7d-remarkable2.dts:319.19-335.4: Warning (avoid_unnecessary_addr_size): /soc/bus@30800000/i2c@30a50000/pmic@62: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property

Remove unnecessary #address-cells/#size-cells to fix it.

Fixes: 9076cbaa7757 ("ARM: dts: imx7d-remarkable2: Enable silergy,sy7636a")
Signed-off-by: Fabio Estevam 
Reviewed-by: Alistair Francis 
Signed-off-by: Shawn Guo