Pull ARM SoC fixes from Arnd Bergmann:
 "All the changes this time are minor devicetree corrections, the
  majority being for 64-bit Rockchip SoC support. These are a couple of
  corrections for properties that are in violation of the binding, some
  that put the machine into safer operating points for the eMMC and
  thermal settings, and missing properties that prevented rk356x PCIe
  and ethernet from working correctly.

  The changes for amlogic and mediatek address incorrect properties that
  were preventing the display support on MT8195 and the MMC support on
  various Meson SoCs from working correctly.

  The stihxxx-b2120 change fixes the GPIO polarity for the DVB tuner to
  allow this to be used correctly after a futre driver change, though it
  has no effect on older kernels"

* tag 'soc-fixes-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: meson-gx: Make mmc host controller interrupts level-sensitive
  arm64: dts: meson-g12-common: Make mmc host controller interrupts level-sensitive
  arm64: dts: meson-axg: Make mmc host controller interrupts level-sensitive
  ARM: dts: stihxxx-b2120: fix polarity of reset line of tsin0 port
  arm64: dts: mediatek: mt8195: Fix vdosys* compatible strings
  arm64: dts: rockchip: align rk3399 DMC OPP table with bindings
  arm64: dts: rockchip: set sdmmc0 speed to sd-uhs-sdr50 on rock-3a
  arm64: dts: rockchip: fix probe of analog sound card on rock-3a
  arm64: dts: rockchip: add missing #interrupt-cells to rk356x pcie2x1
  arm64: dts: rockchip: fix input enable pinconf on rk3399
  ARM: dts: rockchip: add power-domains property to dp node on rk3288
  arm64: dts: rockchip: add io domain setting to rk3566-box-demo
  arm64: dts: rockchip: remove unsupported property from sdmmc2 for rock-3a
  arm64: dts: rockchip: drop unused LED mode property from rk3328-roc-cc
  arm64: dts: rockchip: reduce thermal limits on rk3399-pinephone-pro
  arm64: dts: rockchip: use correct reset names for rk3399 crypto nodes

Fix polarity of reset line of tsin0 port for stihxxx-b2120

* tag 'sti-dt-for-6.3-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
  ARM: dts: stihxxx-b2120: fix polarity of reset line of tsin0 port

Link: https://lore.kernel.org/r/8e05c729-89bc-20f3-acf6-096fb85d7e36@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

According to c8sectpfe driver code we first drive reset line low and
then high to reset the port, therefore the reset line is supposed to
be annotated as "active low". This will be important when we convert
the driver to gpiod API.

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

Fixes to adapt to correct binding behaviour and fixes for devices on some boards

Most notably may be the adaption of lower thermal limits for the pinephone
pro, where the original hiher ones could result in (possibly permanent)
display issues.

* tag 'v6.2-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: align rk3399 DMC OPP table with bindings
  arm64: dts: rockchip: set sdmmc0 speed to sd-uhs-sdr50 on rock-3a
  arm64: dts: rockchip: fix probe of analog sound card on rock-3a
  arm64: dts: rockchip: add missing #interrupt-cells to rk356x pcie2x1
  arm64: dts: rockchip: fix input enable pinconf on rk3399
  ARM: dts: rockchip: add power-domains property to dp node on rk3288
  arm64: dts: rockchip: add io domain setting to rk3566-box-demo
  arm64: dts: rockchip: remove unsupported property from sdmmc2 for rock-3a
  arm64: dts: rockchip: drop unused LED mode property from rk3328-roc-cc
  arm64: dts: rockchip: reduce thermal limits on rk3399-pinephone-pro
  arm64: dts: rockchip: use correct reset names for rk3399 crypto nodes

Link: https://lore.kernel.org/r/3514663.mvXUDI8C0e@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The Flash Interface Unit (FIU) should have a reference to the Shared
Memory controller (SHM) so that flash access from the host (x86 computer
managed by the WPCM450 BMC) can be blocked during flash access by the
FIU driver.

Fixes: 38abcb0d68767 ("ARM: dts: wpcm450: Add FIU SPI controller node")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20230129112611.1176517-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230201044158.962417-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX fixes for 6.2, round 2:

- Update MAINTAINERS i.MX entry to match arm64 freescale DTS.
- Drop misused 'uart-has-rtscts' from imx8m-venice boards.
- Fix USB host over-current polarity for imx7d-smegw01 board.
- Fix a typo in i.MX8DXL sc_pwrkey property name.
- Fix GPIO watchdog property for i.MX8MM eDM SBC board.
- Keep Ethernet PHY powered on imx8mm-verdin to avoid kernel crash.
- Fix configuration of i.MX8MM pad UART1_DTE_RX.

* tag 'imx-fixes-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
  arm64: dts: imx8mm-verdin: Do not power down eth-phy
  MAINTAINERS: match freescale ARM64 DT directory in i.MX entry
  arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX
  arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode
  arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts'
  arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC

Link: https://lore.kernel.org/r/20230130003614.GP20713@T480
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Currently, when resetting the USB modem via AT commands, the modem is
no longer re-connected.

This problem is caused by the incorrect description of the USB_OTG2_OC
pad. It should have pull-up enabled, hysteresis enabled and the
property 'over-current-active-low' should be passed.

With this change, the USB modem can be successfully re-connected
after a reset.

Cc: stable@vger.kernel.org
Fixes: 9ac0ae97e349 ("ARM: dts: imx7d-smegw01: Add support for i.MX7D SMEGW01 board")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Missed a digit in the PCA9849 compatible string.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Fixes: 65b697e5dec7 ("ARM: dts: aspeed: Add IBM Bonnell system BMC devicetree")
Link: https://lore.kernel.org/r/20220826194457.164492-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230118051736.246714-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

AT91 fixes for 6.2:

It contains:
- fix the clock provided via DT for DDR controller on SAM9X60

* tag 'at91-fixes-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sam9x60: fix the ddr clock for sam9x60

Link: https://lore.kernel.org/r/20230119112101.42045-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

STM32 DT fixes for v6.2, round 1

Highlights:
-----------

 -STM32MP15:
  - Fix missing chip select phandle in several stm32mp15x based boards.

* tag 'stm32-dt-for-v6.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argon
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som

Link: https://lore.kernel.org/r/3fe26bf9-297b-5c78-682b-37fa6d8b6190@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>