linux-stable.git/arch/arm/boot, branch v6.11.2

ARM: dts: imx6ull-seeed-npi: fix fsl,pins property in tscgrp pinctrl

2024-10-04T14:38:51+00:00

commit 3dedd4889cfc2851444a1f7626b293c0bfd1e42c upstream.

The property is "fsl,pins", not "fsl,pin".  Wrong property means the pin
configuration was not applied.  Fixes dtbs_check warnings:

  imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pins' is a required property
  imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'

Cc: stable@vger.kernel.org
Fixes: e3b5697195c8 ("ARM: dts: imx6ull: add seeed studio NPi dev board")
Signed-off-by: Krzysztof Kozlowski 
Reviewed-by: Parthiban Nallathambi 
Signed-off-by: Shawn Guo 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: imx6ul-geam: fix fsl,pins property in tscgrp pinctrl

2024-10-04T14:38:51+00:00

commit 1b0e32753d8550908dff8982410357b5114be78c upstream.

The property is "fsl,pins", not "fsl,pin".  Wrong property means the pin
configuration was not applied.  Fixes dtbs_check warnings:

  imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pins' is a required property
  imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'

Cc: stable@vger.kernel.org
Fixes: a58e4e608bc8 ("ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support")
Signed-off-by: Krzysztof Kozlowski 
Reviewed-by: Michael Trimarchi 
Signed-off-by: Shawn Guo 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: imx7d-zii-rmu2: fix Ethernet PHY pinctrl property

2024-10-04T14:37:36+00:00

[ Upstream commit 0e49cfe364dea4345551516eb2fe53135a10432b ]

There is no "fsl,phy" property in pin controller pincfg nodes:

  imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,pins' is a required property
  imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,phy' does not match any of the regexes: 'pinctrl-[0-9]+'

Fixes: f496e6750083 ("ARM: dts: Add ZII support for ZII i.MX7 RMU2 board")
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Shawn Guo 
Signed-off-by: Sasha Levin

ARM: dts: microchip: sama7g5: Fix RTT clock

2024-10-04T14:37:36+00:00

[ Upstream commit 867bf1923200e6ad82bad0289f43bf20b4ac7ff9 ]

According to datasheet, Chapter 34. Clock Generator, section 34.2,
Embedded characteristics, source clock for RTT is the TD_SLCK, registered
with ID 1 by the slow clock controller driver. Fix RTT clock.

Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Link: https://lore.kernel.org/r/20240826165320.3068359-1-claudiu.beznea@tuxon.dev
Signed-off-by: Claudiu Beznea 
Signed-off-by: Sasha Levin

ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks

2024-10-04T14:37:35+00:00

[ Upstream commit d355c895fa4ddd8bec15569eee540baeed7df8c5 ]

The RTC and RTT peripherals use the timing domain slow clock (TD_SLCK),
sourced from the 32.768 kHz crystal oscillator or slow rc oscillator.

The previously used Monitoring domain slow clock (MD_SLCK) is sourced
from an internal RC oscillator which is most probably not precise enough
for real time clock purposes.

Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes: 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")
Signed-off-by: Alexander Dahl 
Link: https://lore.kernel.org/r/20240821055136.6858-1-ada@thorsis.com
[claudiu.beznea: removed () around the last commit description paragraph,
 removed " in front of "timing domain slow clock", described that
 TD_SLCK can also be sourced from slow rc oscillator]
Signed-off-by: Claudiu Beznea 
Signed-off-by: Sasha Levin

Merge tag 'imx-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

2024-08-28T20:27:29+00:00

i.MX fixes for 6.11:

- One imx8mp-beacon-kit change from Adam Ford to fix the broken WM8962
  audio support
- One pinctrl property typo fix for imx8mm-phygate
- One layerscape fix from Krzysztof Kozlowski to get thermal nodes
  correct name length
- A couple of imx93-tqma9352 fixes from Markus Niebel, one on CMA
  alloc-ranges and the other on SD-Card cd-gpios typo
- One change from Michal Vokáč to fix imx6dl-yapp43 LED current to match
  the HW design
- A couple of imx95 fixes from Peng Fan, one to correct a55 power
  domains and the other to correct L3Cache cache-sets
- One tqma9352 watchdog reset fix from Sascha Hauer
- One imx93 change from Shenwei Wang to fix the default value for STMMAC
  EQOS snps,clk-csr

* tag 'imx-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
  arm64: dts: imx95: correct L3Cache cache-sets
  arm64: dts: imx95: correct a55 power-domains
  arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
  arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
  ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
  arm64: dts: imx93: update default value for snps,clk-csr
  arm64: dts: freescale: tqma9352: Fix watchdog reset
  arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
  arm64: dts: layerscape: fix thermal node names length

Link: https://lore.kernel.org/r/ZrtsTO1+jXhJ6GSM@dragon
Signed-off-by: Arnd Bergmann

Merge tag 'omap-for-v6.11/fixes-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into arm/fixes

2024-08-28T20:27:16+00:00

OMAP fixes for v6.11-rc

- omap3-n900: fix accelerometer orientation

* tag 'omap-for-v6.11/fixes-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
  ARM: dts: omap3-n900: correct the accelerometer orientation

Link: https://lore.kernel.org/r/7h4j7eyhyh.fsf@baylibre.com
Signed-off-by: Arnd Bergmann

ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design

2024-08-12T11:48:16+00:00

On the imx6dl-yapp4 revision based boards, the RGB LED is not driven
directly by the LP5562 driver but through FET transistors. Hence the LED
current is not determined by the driver but by the LED series resistors.

On the imx6dl-yapp43 revision based boards, we removed the FET transistors
to drive the LED directly from the LP5562 but forgot to tune the output
current to match the previous HW design.

Set the LED current on imx6dl-yapp43 based boards to the same values
measured on the imx6dl-yapp4 boards and limit the maximum current to 20mA.

Fixes: 7da4734751e0 ("ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board")
Cc: 
Signed-off-by: Michal Vokáč 
Signed-off-by: Shawn Guo

ARM: dts: omap3-n900: correct the accelerometer orientation

2024-08-05T18:02:39+00:00

Negate the values reported for the accelerometer z-axis in order to
match Documentation/devicetree/bindings/iio/mount-matrix.txt.

Fixes: 14a213dcb004 ("ARM: dts: n900: use iio driver for accelerometer")

Signed-off-by: Sicelo A. Mhlongo 
Reviewed-By: Andreas Kemnade 
Link: https://lore.kernel.org/r/20240722113137.3240847-1-absicsz@gmail.com
Signed-off-by: Kevin Hilman

arm: dts: arm: versatile-ab: Fix duplicate clock node name

2024-08-04T15:24:15+00:00

Commit 04f08ef291d4 ("arm/arm64: dts: arm: Use generic clock and
regulator nodenames") renamed nodes and created 2 "clock-24000000" nodes
(at different paths).

The kernel can't handle these duplicate names even though they are at
different paths.  Fix this by renaming one of the nodes to "clock-pclk".

This name is aligned with other Arm boards (those didn't have a known
frequency to use in the node name).

Fixes: 04f08ef291d4 ("arm/arm64: dts: arm: Use generic clock and regulator nodenames")
Reported-by: Guenter Roeck 
Signed-off-by: Rob Herring (Arm) 
Tested-by: Guenter Roeck 
Reviewed-by: Linus Walleij 
Tested-by: Linus Walleij 
Signed-off-by: Linus Torvalds