linux-stable.git/arch/arm/boot, branch v5.8.2 Linux kernel stable tree ARM: dts: exynos: Extend all Exynos5800 A15's OPPs with max voltage data 2020-08-19T06:27:07+00:00 Marek Szyprowski m.szyprowski@samsung.com 2020-05-28T08:15:25+00:00 89a16b68221c0b20d61032fc14cb645e68cdd243 commit d644853ff8fcbb7a4e3757f9d8ccc39d930b7e3c upstream. On Exynos5422/5800 the regulator supply for the A15 cores ("vdd_arm") is coupled with the regulator supply for the SoC internal circuits ("vdd_int"), thus all operating points that modify one of those supplies have to specify a triplet of the min/target/max values to properly work with regulator coupling. Fixes: eaffc4de16c6 ("ARM: dts: exynos: Add missing CPU frequencies for Exynos5422/5800") Cc: <stable@vger.kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d644853ff8fcbb7a4e3757f9d8ccc39d930b7e3c upstream.

On Exynos5422/5800 the regulator supply for the A15 cores ("vdd_arm") is
coupled with the regulator supply for the SoC internal circuits
("vdd_int"), thus all operating points that modify one of those supplies
have to specify a triplet of the min/target/max values to properly work
with regulator coupling.

Fixes: eaffc4de16c6 ("ARM: dts: exynos: Add missing CPU frequencies for Exynos5422/5800")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: stm32: Fix spi4 pins in stm32mp15-pinctrl 2020-08-19T06:26:10+00:00 Patrick Delaunay patrick.delaunay@st.com 2020-07-08T11:43:24+00:00 af58be14b8c11cb41e62de9bfb4597308ca492c0 [ Upstream commit 4fe663890ac5b3b099f458b20cce13fe8efec12b ] Move spi4_pins_a nodes from pinctrl_z to pinctrl as the associated pins are not in BANK Z. Fixes: 498a7014989d ("ARM: dts: stm32: Add missing pinctrl entries for STM32MP15") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4fe663890ac5b3b099f458b20cce13fe8efec12b ]

Move spi4_pins_a nodes from pinctrl_z to pinctrl as the associated pins
are not in BANK Z.

Fixes: 498a7014989d ("ARM: dts: stm32: Add missing pinctrl entries for STM32MP15")

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages 2020-08-19T06:26:10+00:00 Chen-Yu Tsai wens@csie.org 2020-07-17T16:00:48+00:00 19798aa6945c152b8976a6a5abe45a496f1daf39 [ Upstream commit e4dae01bf08b754de79072441c357737220b873f ] The Bananapi M2+ uses a GPIO line to change the effective resistance of the CPU supply regulator's feedback resistor network. The voltages described in the device tree were given directly by the vendor. This turns out to be slightly off compared to the real values. The updated voltages are based on calculations of the feedback resistor network, and verified down to three decimal places with a multi-meter. Fixes: 6eeb4180d4b9 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200717160053.31191-4-wens@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e4dae01bf08b754de79072441c357737220b873f ]

The Bananapi M2+ uses a GPIO line to change the effective resistance of
the CPU supply regulator's feedback resistor network. The voltages
described in the device tree were given directly by the vendor. This
turns out to be slightly off compared to the real values.

The updated voltages are based on calculations of the feedback resistor
network, and verified down to three decimal places with a multi-meter.

Fixes: 6eeb4180d4b9 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-4-wens@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: sunxi: bananapi-m2-plus-v1.2: Add regulator supply to all CPU cores 2020-08-19T06:26:09+00:00 Chen-Yu Tsai wens@csie.org 2020-07-17T16:00:47+00:00 2f2b61f5cb0c3fdc5c0aa2275d8df43e7bcf0fb7 [ Upstream commit 55b271af765b0e03d1ff29502f81644b1a3c87fd ] The device tree currently only assigns the a supply for the first CPU core, when in reality the regulator supply is shared by all four cores. This might cause an issue if the implementation does not realize the sharing of the supply. Assign the same regulator supply to the remaining CPU cores to address this. Fixes: 6eeb4180d4b9 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200717160053.31191-3-wens@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 55b271af765b0e03d1ff29502f81644b1a3c87fd ]

The device tree currently only assigns the a supply for the first CPU
core, when in reality the regulator supply is shared by all four cores.
This might cause an issue if the implementation does not realize the
sharing of the supply.

Assign the same regulator supply to the remaining CPU cores to address
this.

Fixes: 6eeb4180d4b9 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-3-wens@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: at91: sama5d3_xplained: change phy-mode 2020-08-19T06:26:09+00:00 Alexandre Belloni alexandre.belloni@bootlin.com 2020-07-17T23:36:44+00:00 3b50431615415cde6b55e4ff219f37e3f9dee1dc [ Upstream commit 7dbf4bbf1c320d82058878bd44805724d171e1e8 ] Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY"), networking is broken on sama5d3 xplained. The device tree has phy-mode = "rgmii" and this worked before, because KSZ9031 PHY started with default RGMII internal delays configuration (TX off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the KSZ9031 PHY starts handling phy mode properly and disables RX delay, as result networking is become broken. Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous behavior. Fixes: bcf3440c6dd78bfe ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200717233644.841080-1-alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7dbf4bbf1c320d82058878bd44805724d171e1e8 ]

Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the
KSZ9031 PHY"), networking is broken on sama5d3 xplained.

The device tree has phy-mode = "rgmii" and this worked before, because
KSZ9031 PHY started with default RGMII internal delays configuration (TX
off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the
KSZ9031 PHY starts handling phy mode properly and disables RX delay, as
result networking is become broken.

Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous
behavior.

Fixes: bcf3440c6dd78bfe ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200717233644.841080-1-alexandre.belloni@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: exynos: Disable frequency scaling for FSYS bus on Odroid XU3 family 2020-08-19T06:26:09+00:00 Marek Szyprowski m.szyprowski@samsung.com 2020-07-14T06:47:59+00:00 14ae200d052bb9fd2384d419bc5718c46f898bac [ Upstream commit 9ff416cf45a08f28167b75045222c762a0347930 ] Commit 1019fe2c7280 ("ARM: dts: exynos: Adjust bus related OPPs to the values correct for Exynos5422 Odroids") changed the parameters of the OPPs for the FSYS bus. Besides the frequency adjustments, it also removed the 'shared-opp' property from the OPP table used for FSYS_APB and FSYS busses. This revealed that in fact the FSYS bus frequency scaling never worked. When one OPP table is marked as 'opp-shared', only the first bus which selects the OPP sets the rate of its clock. Then OPP core assumes that the other busses have been changed to that OPP and no change to their clock rates are needed. Thus when FSYS_APB bus, which was registered first, set the rate for its clock, the OPP core did not change the FSYS bus clock later. The mentioned commit removed that behavior, what introduced a regression on some Odroid XU3 boards. Frequency scaling of the FSYS bus causes instability of the USB host operation, what can be observed as network hangs. To restore old behavior, simply disable frequency scaling for the FSYS bus. Reported-by: Willy Wolff <willy.mh.wolff.ml@gmail.com> Fixes: 1019fe2c7280 ("ARM: dts: exynos: Adjust bus related OPPs to the values correct for Exynos5422 Odroids") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9ff416cf45a08f28167b75045222c762a0347930 ]

Commit 1019fe2c7280 ("ARM: dts: exynos: Adjust bus related OPPs to the
values correct for Exynos5422 Odroids") changed the parameters of the
OPPs for the FSYS bus. Besides the frequency adjustments, it also removed
the 'shared-opp' property from the OPP table used for FSYS_APB and FSYS
busses.

This revealed that in fact the FSYS bus frequency scaling never worked.
When one OPP table is marked as 'opp-shared', only the first bus which
selects the OPP sets the rate of its clock. Then OPP core assumes that
the other busses have been changed to that OPP and no change to their
clock rates are needed. Thus when FSYS_APB bus, which was registered
first, set the rate for its clock, the OPP core did not change the FSYS
bus clock later.

The mentioned commit removed that behavior, what introduced a regression
on some Odroid XU3 boards. Frequency scaling of the FSYS bus causes
instability of the USB host operation, what can be observed as network
hangs. To restore old behavior, simply disable frequency scaling for the
FSYS bus.

Reported-by: Willy Wolff <willy.mh.wolff.ml@gmail.com>
Fixes: 1019fe2c7280 ("ARM: dts: exynos: Adjust bus related OPPs to the values correct for Exynos5422 Odroids")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: gose: Fix ports node name for adv7612 2020-08-19T06:26:09+00:00 Niklas Söderlund niklas.soderlund+renesas@ragnatech.se 2020-07-13T11:10:16+00:00 4f8c0858195c888469b9ce2e121b535dc57b320b [ Upstream commit 59692ac5a7bb8c97ff440fc8917828083fbc38d6 ] When adding the adv7612 device node the ports node was misspelled as port, fix this. Fixes: bc63cd87f3ce924f ("ARM: dts: gose: add HDMI input") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200713111016.523189-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 59692ac5a7bb8c97ff440fc8917828083fbc38d6 ]

When adding the adv7612 device node the ports node was misspelled as
port, fix this.

Fixes: bc63cd87f3ce924f ("ARM: dts: gose: add HDMI input")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20200713111016.523189-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: gose: Fix ports node name for adv7180 2020-08-19T06:26:08+00:00 Niklas Söderlund niklas.soderlund+renesas@ragnatech.se 2020-07-04T15:58:55+00:00 459fae59fa50c163b8043f624d412a644f14b727 [ Upstream commit d344234abde938ae1062edb6c05852b0bafb4a03 ] When adding the adv7180 device node the ports node was misspelled as port, fix this. Fixes: 8cae359049a88b75 ("ARM: dts: gose: add composite video input") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200704155856.3037010-2-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d344234abde938ae1062edb6c05852b0bafb4a03 ]

When adding the adv7180 device node the ports node was misspelled as
port, fix this.

Fixes: 8cae359049a88b75 ("ARM: dts: gose: add composite video input")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20200704155856.3037010-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: stm32: fix uart7_pins_a comments in stm32mp15-pinctrl 2020-08-19T06:26:03+00:00 Erwan Le Ray erwan.leray@st.com 2020-05-28T07:40:03+00:00 1e5993c9e22c62a9f416148a2c5e610a6aed28cd [ Upstream commit 391e437eedc0dab0a9f2c26997e68e040ae04ea3 ] Fix uart7_pins_a comments to indicate UART7 pins instead of UART4 pins. Fixes: bf4b5f379fed ("ARM: dts: stm32: Add missing pinctrl definitions for STM32MP157") Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 391e437eedc0dab0a9f2c26997e68e040ae04ea3 ]

Fix uart7_pins_a comments to indicate UART7 pins instead of UART4 pins.

Fixes: bf4b5f379fed ("ARM: dts: stm32: Add missing pinctrl definitions for STM32MP157")

Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: stm32: fix uart nodes ordering in stm32mp15-pinctrl 2020-08-19T06:26:03+00:00 Erwan Le Ray erwan.leray@st.com 2020-05-28T07:40:02+00:00 ca1e6f9272accb038f7d92a992de469f285bc406 [ Upstream commit f6b43d89d3b5a31bf4251a26c61e92bf659e74c5 ] Fix usart and uart nodes ordering. Several usart nodes didn't respect expecting ordering. Fixes: 077e0638fc83 ("ARM: dts: stm32: Add alternate pinmux for USART2 pins on stm32mp15") Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f6b43d89d3b5a31bf4251a26c61e92bf659e74c5 ]

Fix usart and uart nodes ordering. Several usart nodes didn't respect
expecting ordering.

Fixes: 077e0638fc83 ("ARM: dts: stm32: Add alternate pinmux for USART2 pins on stm32mp15")

Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>