Pull ARM SoC fixes from Arnd Bergmann:
"This time there is one fix for the error path in the mediatek cmdq
driver (used by their video driver) and a couple of devicetree fixes,
mostly for 32-bit ARM, and fairly harmless:
- On OMAP2 there were a few regressions in the ethernet drivers, one
of them leading to an external abort trap
- One Raspberry Pi version had a misconfigured LED
- Interrupts on Broadcom NSP were slightly misconfigured
- One i.MX6q board had issues with graphics mode setting
- On mmp3 there are some minor fixes that were submitted for v5.8
with a cc:stable tag, so I ended up picking them up here as well
- The Mediatek Video Codec needs to run at a higher frequency than
configured originally"
* tag 'armsoc-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy
ARM: dts: mmp3-dell-ariel: Fix the SPI devices
ARM: dts: mmp3: Use the MMP3 compatible string for /clocks
ARM: dts: bcm: HR2: Fix PPI interrupt types
ARM: dts: bcm2835-rpi-zero-w: Fix led polarity
ARM: dts/imx6q-bx50v3: Set display interface clock parents
soc: mediatek: cmdq: return send msg error code
arm64: dts: mt8173: fix vcodec-enc clock
ARM: dts: Fix wrong mdio clock for dm814x
ARM: dts: am437x: fix networking on boards with ksz9031 phy
ARM: dts: am57xx: fix networking on boards with ksz9031 phy
Pull ARM fixes from Russell King: - correct value of decompressor tag size in header - fix DACR value when we have nested exceptions - fix a missing newline on a kernel message - fix mask for ptrace thumb breakpoint hook * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8977/1: ptrace: Fix mask for thumb breakpoint hook ARM: 8973/1: Add missing newline terminator to kernel message ARM: uaccess: fix DACR mismatch with nested exceptions ARM: uaccess: integrate uaccess_save and uaccess_restore ARM: uaccess: consolidate uaccess asm to asm/uaccess-asm.h ARM: 8970/1: decompressor: increase tag size
Few cpsw related dts fixes for omaps
Recent cpsw driver changes exposed few regressions in the cpsw related
dts configuration that would be good to fix:
- Few more boards still need to be updated to use rgmii-rxid phy caused
by the fallout from commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode
support for the KSZ9031 PHY" as the rx delay is now disabled unless we
use rgmii-rxid.
- On dm814x we have been using a wrong clock for mdio that now can produce
external abort on some boards
* tag 'omap-for-v5.7/cpsw-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix wrong mdio clock for dm814x
ARM: dts: am437x: fix networking on boards with ksz9031 phy
ARM: dts: am57xx: fix networking on boards with ksz9031 phy
Link: https://lore.kernel.org/r/pull-1589472123-367692@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.7, please pull the following: - Vincent fixes the polarity of the ACT LED on the Raspberry Pi Zero W board - Hamish fixes the ARM PPI interrupts sensitivy for the Hurricane 2 SoCs * tag 'arm-soc/for-5.7/devicetree-fixes-part2-v2' of https://github.com/Broadcom/stblinux: ARM: dts: bcm: HR2: Fix PPI interrupt types ARM: dts: bcm2835-rpi-zero-w: Fix led polarity Link: https://lore.kernel.org/r/20200524203714.17035-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX fixes for 5.7, round 2: One imx6q-bx50v3 device tree change to fix an issue, attempting atomic modeset while using HDMI and display port at the same time causes LDB clock programming to destroy the programming of HDMI. * tag 'imx-fixes-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts/imx6q-bx50v3: Set display interface clock parents Link: https://lore.kernel.org/r/20200521150719.GB24084@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These three fixes should make it into linux-5.7 and also into the branch for other mmp dt changes for v5.8, so I created a branch for them. * mmp/fixes: ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy ARM: dts: mmp3-dell-ariel: Fix the SPI devices ARM: dts: mmp3: Use the MMP3 compatible string for /clocks Signed-off-by: Arnd Bergmann <arnd@arndb.de>
"usb-nop-xceiv" is good enough if we don't lose the configuration done by the firmware, but we'd really prefer a real driver. Unfortunately, the PHY core is odd in that when the node is compatible with "usb-nop-xceiv", it ignores the other compatible strings. Let's just remove it. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: <stable@vger.kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I've managed to get about everything wrong while digging these out of OEM's board file. Correct the bus numbers, the exact model of the NOR flash, polarity of the chip selects and align the SPI frequency with the data sheet. Tested that it works now, with a slight fix to the PXA SSP driver. Link: https://lore.kernel.org/r/20200419171157.672999-16-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: <stable@vger.kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Clocks are in fact slightly different on MMP3. In particular, PLL2 is fixed to a different frequency, there's an extra PLL3, and the GPU clocks are configured differently. Link: https://lore.kernel.org/r/20200419171157.672999-15-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: <stable@vger.kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These error messages are output when booting on a BCM HR2 system:
GIC: PPI11 is secure or misconfigured
GIC: PPI13 is secure or misconfigured
Per ARM documentation these interrupts are triggered on a rising edge.
See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1,
Section 3.3.8 Interrupt Configuration Registers.
The same issue was resolved for NSP systems in commit 5f1aa51c7a1e
("ARM: dts: NSP: Fix PPI interrupt types").
Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file")
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>