linux-stable.git/arch/arm/boot, branch v5.6.8 Linux kernel stable tree ARM: dts: sunxi: Fix DE2 clocks register range 2020-04-23T08:38:23+00:00 Jernej Skrabec jernej.skrabec@siol.net 2020-01-24T23:20:09+00:00 1a7074e27f7d72585d78542641a55076168cda97 commit da180322582bd9db07f29e6d4a2d170afde0703f upstream. As it can be seen from DE2 manual, clock range is 0x10000. Fix it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Fixes: 73f122c82775 ("ARM: dts: sun8i: a83t: Add display pipeline") Fixes: 05a43a262d03 ("ARM: dts: sun8i: r40: Add HDMI pipeline") Fixes: 21b299209330 ("ARM: sun8i: v3s: add device nodes for DE2 display pipeline") Fixes: d8c6f1f0295c ("ARM: sun8i: h3/h5: add DE2 CCU device node for H3") [wens@csie.org: added fixes tags] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit da180322582bd9db07f29e6d4a2d170afde0703f upstream.

As it can be seen from DE2 manual, clock range is 0x10000.

Fix it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Fixes: 73f122c82775 ("ARM: dts: sun8i: a83t: Add display pipeline")
Fixes: 05a43a262d03 ("ARM: dts: sun8i: r40: Add HDMI pipeline")
Fixes: 21b299209330 ("ARM: sun8i: v3s: add device nodes for DE2 display pipeline")
Fixes: d8c6f1f0295c ("ARM: sun8i: h3/h5: add DE2 CCU device node for H3")
[wens@csie.org: added fixes tags]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: rockchip: fix lvds-encoder ports subnode for rk3188-bqedison2qc 2020-04-23T08:38:07+00:00 Johan Jonker jbx6244@gmail.com 2020-03-16T17:46:47+00:00 d2564bc4ae84417bd618b1ddf9b2fbfd38376e0d [ Upstream commit 1a7e99599dffd836fcb720cdc0eaf3cd43d7af4a ] A test with the command below gives this error: arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: lvds-encoder: 'ports' is a required property Fix error by adding a ports wrapper for port@0 and port@1 inside the 'lvds-encoder' node for rk3188-bqedison2qc. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/ bridge/lvds-codec.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200316174647.5598-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1a7e99599dffd836fcb720cdc0eaf3cd43d7af4a ]

A test with the command below gives this error:

arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: lvds-encoder:
'ports' is a required property

Fix error by adding a ports wrapper for port@0 and port@1
inside the 'lvds-encoder' node for rk3188-bqedison2qc.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/
bridge/lvds-codec.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200316174647.5598-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: rockchip: fix vqmmc-supply property name for rk3188-bqedison2qc 2020-04-23T08:38:01+00:00 Johan Jonker jbx6244@gmail.com 2020-03-07T13:48:37+00:00 f50a08556d46a213547e1727ff0d697fdc4021c7 [ Upstream commit 9cd568dc588c5d168615bf34f325fabe33b2c9a0 ] A test with the command below does not detect all errors in combination with 'additionalProperties: false' and allOf: - $ref: "synopsys-dw-mshc-common.yaml#" allOf: - $ref: "mmc-controller.yaml#" 'additionalProperties' applies to all properties that are not accounted-for by 'properties' or 'patternProperties' in the immediate schema. First when we combine rockchip-dw-mshc.yaml, synopsys-dw-mshc-common.yaml and mmc-controller.yaml it gives this error: arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: mmc@10218000: 'vmmcq-supply' does not match any of the regexes: '^.*@[0-9]+$', '^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)| uhs-(sdr(12|25|50|104)|ddr50))$', 'pinctrl-[0-9]+' 'vmmcq-supply' is not a valid property name for mmc nodes. Fix this error by renaming it to 'vqmmc-supply'. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200307134841.13803-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9cd568dc588c5d168615bf34f325fabe33b2c9a0 ]

A test with the command below does not detect all errors
in combination with 'additionalProperties: false' and
allOf:
  - $ref: "synopsys-dw-mshc-common.yaml#"
allOf:
  - $ref: "mmc-controller.yaml#"

'additionalProperties' applies to all properties that are not
accounted-for by 'properties' or 'patternProperties' in
the immediate schema.

First when we combine rockchip-dw-mshc.yaml,
synopsys-dw-mshc-common.yaml and mmc-controller.yaml it gives
this error:

arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: mmc@10218000:
'vmmcq-supply' does not match any of the regexes:
'^.*@[0-9]+$',
'^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|
uhs-(sdr(12|25|50|104)|ddr50))$',
'pinctrl-[0-9]+'

'vmmcq-supply' is not a valid property name for mmc nodes.
Fix this error by renaming it to 'vqmmc-supply'.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200307134841.13803-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: imx6: Use gpc for FEC interrupt controller to fix wake on LAN. 2020-04-23T08:37:52+00:00 Martin Fuzzey martin.fuzzey@flowbird.group 2020-04-02T13:51:28+00:00 44c7d0df1f1d8dd34fbbba6f22d75816492a4ab2 commit 4141f1a40fc0789f6fd4330e171e1edf155426aa upstream. In order to wake from suspend by ethernet magic packets the GPC must be used as intc does not have wakeup functionality. But the FEC DT node currently uses interrupt-extended, specificying intc, thus breaking WoL. This problem is probably fallout from the stacked domain conversion as intc used to chain to GPC. So replace "interrupts-extended" by "interrupts" to use the default parent which is GPC. Fixes: b923ff6af0d5 ("ARM: imx6: convert GPC to stacked domains") Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4141f1a40fc0789f6fd4330e171e1edf155426aa upstream.

In order to wake from suspend by ethernet magic packets the GPC
must be used as intc does not have wakeup functionality.

But the FEC DT node currently uses interrupt-extended,
specificying intc, thus breaking WoL.

This problem is probably fallout from the stacked domain conversion
as intc used to chain to GPC.

So replace "interrupts-extended" by "interrupts" to use the default
parent which is GPC.

Fixes: b923ff6af0d5 ("ARM: imx6: convert GPC to stacked domains")

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: imx7-colibri: fix muxing of usbc_det pin 2020-04-21T07:08:04+00:00 Oleksandr Suvorov oleksandr.suvorov@toradex.com 2020-02-04T11:11:47+00:00 8db1deb5ab415452751d39bcf224df10333ac3fd commit 7007f2eca0f258710899ca486da00546d03db0ed upstream. USB_C_DET pin shouldn't be in ethernet group. Creating a separate group allows one to use this pin as an USB ID pin. Fixes: b326629f25b7 ("ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D suppor") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7007f2eca0f258710899ca486da00546d03db0ed upstream.

USB_C_DET pin shouldn't be in ethernet group.

Creating a separate group allows one to use this pin
as an USB ID pin.

Fixes: b326629f25b7 ("ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D suppor")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: exynos: Fix polarity of the LCD SPI bus on UniversalC210 board 2020-04-17T14:13:40+00:00 Marek Szyprowski m.szyprowski@samsung.com 2020-03-04T14:37:26+00:00 ddde67d887e03d56a6566a8c50952f4f06599beb commit 32a1671ff8e84f0dfff3a50d4b2091d25e91f5e2 upstream. Recent changes in the SPI core and the SPI-GPIO driver revealed that the GPIO lines for the LD9040 LCD controller on the UniversalC210 board are defined incorrectly. Fix the polarity for those lines to match the old behavior and hardware requirements to fix LCD panel operation with recent kernels. Cc: <stable@vger.kernel.org> # 5.0.x Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 32a1671ff8e84f0dfff3a50d4b2091d25e91f5e2 upstream.

Recent changes in the SPI core and the SPI-GPIO driver revealed that the
GPIO lines for the LD9040 LCD controller on the UniversalC210 board are
defined incorrectly. Fix the polarity for those lines to match the old
behavior and hardware requirements to fix LCD panel operation with
recent kernels.

Cc: <stable@vger.kernel.org> # 5.0.x
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2020-03-27T20:52:32+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-03-27T20:52:32+00:00 32db9f10d52c97ffc407c7dad81c6fafcad730b2 Pull ARM DT and driver fixes from Arnd Bergmann: "For the devicetree files, there are a total of 20 patches, almost entirely for 32-bit machines: - The Allwinner/sun9i r40 SoC dtsi file contains a number of issues, both for correctness and for style that are addressed in separate patches. This causes most of the changed lines of the DT updates this time. - More Allwinner updates fixing the identification of the security system on sun8i/A33, a recent regression of the A83t ethernet, and a few board specific issues on the TBS-A711 macine. - Several bug fixes for OMAP dts files, most notably fixing the timings for the NAND flash on the Nokia N900 that regressed a while ago after the move to configuring them from DT. Some other OMAPs now set the correct dma limits on the L3 bus, and a regression fix addresses lost Ethernet on dm814x - One incorrect setting in the newly added Raspberry Pi Zero W that may cause issues with the SD card controller. - A missing property on the bcm2835 firmware node caused incorrect DMA settings. - An old bug on the oxnas platform causing spurious interrupts is finally addressed. - A regression on the Exynos Midas board broke the OLED panel power supply. - The i.MX6 phycore SoM specified the wrong voltage for the SoC, this is now set to the values from the datasheet. - Some 64-bit machines use a deprecated string to identify the PSCI firmware. There are also several small code fixes addressing mostly serious issues: - Fix the sunxi rsb bus access to no longer return incorrect data when mixing 8 and 16 bit I/O. - Fix a suspend/resume regression on the OMAP2+ lcdc from a missing quirk in the ti-sysc driver - Fix a NULL pointer access from a race in the fsl dpio driver - Fix a v5.5 regression in the exynos-chipid driver that caused an invalid error code probing the device on non-exynos platforms - Fix an out-of-bounds access in the AMD TEE driver" * tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) soc: samsung: chipid: Fix return value on non-Exynos platforms arm64: dts: Fix leftover entry-methods for PSCI ARM: dts: exynos: Fix regulator node aliasing on Midas-based boards ARM: dts: oxnas: Fix clear-mask property ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations ARM: dts: omap5: Add bus_dma_limit for L3 bus ARM: dts: omap4-droid4: Fix lost touchscreen interrupts ARM: dts: dra7: Add bus_dma_limit for L3 bus ARM: bcm2835-rpi-zero-w: Add missing pinctrl name ARM: dts: sun8i: a33: add the new SS compatible dt-bindings: crypto: add new compatible for A33 SS ARM: dts: sun8i: r40: Move SPI device nodes based on address order ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3 ARM: dts: sun8i: r40: Move AHCI device node based on address order ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage soc: fsl: dpio: register dpio irq handlers after dpio create tee: amdtee: out of bounds read in find_session() ARM: dts: N900: fix onenand timings bus: ti-sysc: Fix quirk flags for lcdc on am335x ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode ... 
Pull ARM DT and driver fixes from Arnd Bergmann:
 "For the devicetree files, there are a total of 20 patches, almost
  entirely for 32-bit machines:

   - The Allwinner/sun9i r40 SoC dtsi file contains a number of issues,
     both for correctness and for style that are addressed in separate
     patches. This causes most of the changed lines of the DT updates
     this time.

   - More Allwinner updates fixing the identification of the security
     system on sun8i/A33, a recent regression of the A83t ethernet, and
     a few board specific issues on the TBS-A711 macine.

   - Several bug fixes for OMAP dts files, most notably fixing the
     timings for the NAND flash on the Nokia N900 that regressed a while
     ago after the move to configuring them from DT. Some other OMAPs
     now set the correct dma limits on the L3 bus, and a regression fix
     addresses lost Ethernet on dm814x

   - One incorrect setting in the newly added Raspberry Pi Zero W that
     may cause issues with the SD card controller.

   - A missing property on the bcm2835 firmware node caused incorrect
     DMA settings.

   - An old bug on the oxnas platform causing spurious interrupts is
     finally addressed.

   - A regression on the Exynos Midas board broke the OLED panel power
     supply.

   - The i.MX6 phycore SoM specified the wrong voltage for the SoC, this
     is now set to the values from the datasheet.

   - Some 64-bit machines use a deprecated string to identify the PSCI
     firmware.

  There are also several small code fixes addressing mostly serious
  issues:

   - Fix the sunxi rsb bus access to no longer return incorrect data
     when mixing 8 and 16 bit I/O.

   - Fix a suspend/resume regression on the OMAP2+ lcdc from a missing
     quirk in the ti-sysc driver

   - Fix a NULL pointer access from a race in the fsl dpio driver

   - Fix a v5.5 regression in the exynos-chipid driver that caused an
     invalid error code probing the device on non-exynos platforms

   - Fix an out-of-bounds access in the AMD TEE driver"

* tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  soc: samsung: chipid: Fix return value on non-Exynos platforms
  arm64: dts: Fix leftover entry-methods for PSCI
  ARM: dts: exynos: Fix regulator node aliasing on Midas-based boards
  ARM: dts: oxnas: Fix clear-mask property
  ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations
  ARM: dts: omap5: Add bus_dma_limit for L3 bus
  ARM: dts: omap4-droid4: Fix lost touchscreen interrupts
  ARM: dts: dra7: Add bus_dma_limit for L3 bus
  ARM: bcm2835-rpi-zero-w: Add missing pinctrl name
  ARM: dts: sun8i: a33: add the new SS compatible
  dt-bindings: crypto: add new compatible for A33 SS
  ARM: dts: sun8i: r40: Move SPI device nodes based on address order
  ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3
  ARM: dts: sun8i: r40: Move AHCI device node based on address order
  ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage
  soc: fsl: dpio: register dpio irq handlers after dpio create
  tee: amdtee: out of bounds read in find_session()
  ARM: dts: N900: fix onenand timings
  bus: ti-sysc: Fix quirk flags for lcdc on am335x
  ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode
  ...
Merge tag 'oxnas-arm-soc-dt-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas into arm/fixes 2020-03-25T13:27:25+00:00 Arnd Bergmann arnd@arndb.de 2020-03-25T12:51:02+00:00 a88fead83e0db632180a717930aff5fa2e401024 - interrupt controller mask init fix to avoid spurious irq after soft reset * tag 'oxnas-arm-soc-dt-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas: ARM: dts: oxnas: Fix clear-mask property Link: https://lore.kernel.org/r/1cc83d6b-78de-9160-59bf-77cfe726a365@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
- interrupt controller mask init fix to avoid spurious irq after soft reset

* tag 'oxnas-arm-soc-dt-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas:
  ARM: dts: oxnas: Fix clear-mask property

Link: https://lore.kernel.org/r/1cc83d6b-78de-9160-59bf-77cfe726a365@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'arm-soc/for-5.6/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux into arm/fixes 2020-03-25T13:27:23+00:00 Arnd Bergmann arnd@arndb.de 2020-03-25T12:49:47+00:00 94bb9d185854d0accf89f0679f92ff4918f6c767 This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.6, please pull the following: - Nick fixes the missing pinctrl-names property for the Raspberry Pi Zero Wireless DTS - Nicolas fixes the VC4 firmware node dma-range property which does not have the limitations of the soc's bus node * tag 'arm-soc/for-5.6/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations ARM: bcm2835-rpi-zero-w: Add missing pinctrl name Link: https://lore.kernel.org/r/20200323025246.22713-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.6, please pull the following:

- Nick fixes the missing pinctrl-names property for the Raspberry Pi
  Zero Wireless DTS

- Nicolas fixes the VC4 firmware node dma-range property which does not
  have the limitations of the soc's bus node

* tag 'arm-soc/for-5.6/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations
  ARM: bcm2835-rpi-zero-w: Add missing pinctrl name

Link: https://lore.kernel.org/r/20200323025246.22713-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'omap-for-v5.6/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes 2020-03-25T13:27:22+00:00 Arnd Bergmann arnd@arndb.de 2020-03-25T12:46:38+00:00 ae6e45986a67a5d296eb6ef52619ca06e590bfaf Few more fixes for omaps Just few dts fixes: - A fix droid4 touchscreen stopping working with lost gpio interrupts - Also limit omap5 dma range similar to what we've recently done for dra7 * tag 'omap-for-v5.6/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: Add bus_dma_limit for L3 bus ARM: dts: omap4-droid4: Fix lost touchscreen interrupts ARM: dts: dra7: Add bus_dma_limit for L3 bus ARM: dts: N900: fix onenand timings ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode Link: https://lore.kernel.org/r/pull-1584575254-461940@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Few more fixes for omaps

Just few dts fixes:

- A fix droid4 touchscreen stopping working with lost gpio interrupts

- Also limit omap5 dma range similar to what we've recently done for dra7

* tag 'omap-for-v5.6/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap5: Add bus_dma_limit for L3 bus
  ARM: dts: omap4-droid4: Fix lost touchscreen interrupts
  ARM: dts: dra7: Add bus_dma_limit for L3 bus
  ARM: dts: N900: fix onenand timings
  ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode

Link: https://lore.kernel.org/r/pull-1584575254-461940@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>