<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/arch/arm/boot, branch v5.4.85</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>ARM: dts: dra76x: m_can: fix order of clocks</title>
<updated>2020-12-02T07:49:50+00:00</updated>
<author>
<name>Marc Kleine-Budde</name>
<email>mkl@pengutronix.de</email>
</author>
<published>2020-11-11T14:12:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=559ab6fb7b669372cff55b6bf88eefab504ec0ca'/>
<id>559ab6fb7b669372cff55b6bf88eefab504ec0ca</id>
<content type='text'>
[ Upstream commit 05d5de6ba7dbe490dd413b5ca11d0875bd2bc006 ]

According to the bosch,m_can.yaml bindings the first clock shall be the "hclk",
while the second clock "cclk".

This patch fixes the order accordingly.

Fixes: 0adbe832f21a ("ARM: dts: dra76x: Add MCAN node")
Cc: Faiz Abbas &lt;faiz_abbas@ti.com&gt;
Cc: Tony Lindgren &lt;tony@atomide.com&gt;
Cc: linux-omap@vger.kernel.org
Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 05d5de6ba7dbe490dd413b5ca11d0875bd2bc006 ]

According to the bosch,m_can.yaml bindings the first clock shall be the "hclk",
while the second clock "cclk".

This patch fixes the order accordingly.

Fixes: 0adbe832f21a ("ARM: dts: dra76x: Add MCAN node")
Cc: Faiz Abbas &lt;faiz_abbas@ti.com&gt;
Cc: Tony Lindgren &lt;tony@atomide.com&gt;
Cc: linux-omap@vger.kernel.org
Signed-off-by: Marc Kleine-Budde &lt;mkl@pengutronix.de&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: dts: imx50-evk: Fix the chip select 1 IOMUX</title>
<updated>2020-11-24T12:29:04+00:00</updated>
<author>
<name>Fabio Estevam</name>
<email>festevam@gmail.com</email>
</author>
<published>2020-11-05T21:13:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9a4b4a06addf4a88b66efcedad900ce2a2a39845'/>
<id>9a4b4a06addf4a88b66efcedad900ce2a2a39845</id>
<content type='text'>
[ Upstream commit 33d0d843872c5ddbe28457a92fc6f2487315fb9f ]

The SPI chip selects are represented as:

cs-gpios = &lt;&amp;gpio4 11 GPIO_ACTIVE_LOW&gt;, &lt;&amp;gpio4 13 GPIO_ACTIVE_LOW&gt;;

, which means that they are used in GPIO function instead of native
SPI mode.

Fix the IOMUX for the chip select 1 to use GPIO4_13 instead of
the native CSPI_SSI function.

Fixes: c605cbf5e135 ("ARM: dts: imx: add device tree support for Freescale imx50evk board")
Signed-off-by: Fabio Estevam &lt;festevam@gmail.com&gt;
Signed-off-by: Shawn Guo &lt;shawnguo@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 33d0d843872c5ddbe28457a92fc6f2487315fb9f ]

The SPI chip selects are represented as:

cs-gpios = &lt;&amp;gpio4 11 GPIO_ACTIVE_LOW&gt;, &lt;&amp;gpio4 13 GPIO_ACTIVE_LOW&gt;;

, which means that they are used in GPIO function instead of native
SPI mode.

Fix the IOMUX for the chip select 1 to use GPIO4_13 instead of
the native CSPI_SSI function.

Fixes: c605cbf5e135 ("ARM: dts: imx: add device tree support for Freescale imx50evk board")
Signed-off-by: Fabio Estevam &lt;festevam@gmail.com&gt;
Signed-off-by: Shawn Guo &lt;shawnguo@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy</title>
<updated>2020-11-24T12:29:04+00:00</updated>
<author>
<name>Sergey Matyukevich</name>
<email>geomatsi@gmail.com</email>
</author>
<published>2020-10-24T20:11:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=cfee2333791a9b80a0312a5d1b9eb5b7e417de35'/>
<id>cfee2333791a9b80a0312a5d1b9eb5b7e417de35</id>
<content type='text'>
[ Upstream commit 7dd8f0ba88fce98e2953267a66af74c6f4792a56 ]

Commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the
KSZ9031 PHY") fixed micrel phy driver adding proper support for phy
modes. Adapt imx6q-udoo board phy settings : explicitly set required
delay configuration using "rgmii-id".

Fixes: cbd54fe0b2bc ("ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo")
Signed-off-by: Sergey Matyukevich &lt;geomatsi@gmail.com&gt;
Reviewed-by: Fabio Estevam &lt;festevam@gmail.com&gt;
Signed-off-by: Shawn Guo &lt;shawnguo@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 7dd8f0ba88fce98e2953267a66af74c6f4792a56 ]

Commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the
KSZ9031 PHY") fixed micrel phy driver adding proper support for phy
modes. Adapt imx6q-udoo board phy settings : explicitly set required
delay configuration using "rgmii-id".

Fixes: cbd54fe0b2bc ("ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo")
Signed-off-by: Sergey Matyukevich &lt;geomatsi@gmail.com&gt;
Reviewed-by: Fabio Estevam &lt;festevam@gmail.com&gt;
Signed-off-by: Shawn Guo &lt;shawnguo@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: dts: sunxi: bananapi-m2-plus: Enable RGMII RX/TX delay on Ethernet PHY</title>
<updated>2020-11-24T12:29:03+00:00</updated>
<author>
<name>Chen-Yu Tsai</name>
<email>wens@csie.org</email>
</author>
<published>2020-10-24T16:25:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=794a13015fb61494330f6583e6f08015aa395484'/>
<id>794a13015fb61494330f6583e6f08015aa395484</id>
<content type='text'>
[ Upstream commit 3914160ffc0bf762d6d605d4b27036b7b89367ea ]

The Ethernet PHY on the Bananapi M2+ has the RX and TX delays
enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: 8c7ba536e709 ("ARM: sun8i: bananapi-m2-plus: Enable dwmac-sun8i")
Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)")
Fixes: aa8fee415f46 ("ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus")
Signed-off-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Signed-off-by: Maxime Ripard &lt;maxime@cerno.tech&gt;
Tested-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Acked-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Link: https://lore.kernel.org/r/20201024162515.30032-8-wens@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 3914160ffc0bf762d6d605d4b27036b7b89367ea ]

The Ethernet PHY on the Bananapi M2+ has the RX and TX delays
enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: 8c7ba536e709 ("ARM: sun8i: bananapi-m2-plus: Enable dwmac-sun8i")
Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)")
Fixes: aa8fee415f46 ("ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus")
Signed-off-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Signed-off-by: Maxime Ripard &lt;maxime@cerno.tech&gt;
Tested-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Acked-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Link: https://lore.kernel.org/r/20201024162515.30032-8-wens@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHY</title>
<updated>2020-11-24T12:29:03+00:00</updated>
<author>
<name>Chen-Yu Tsai</name>
<email>wens@csie.org</email>
</author>
<published>2020-10-24T16:25:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=c6e7f6bdcbaa0ec4063247d930b4dcfeb9b84fca'/>
<id>c6e7f6bdcbaa0ec4063247d930b4dcfeb9b84fca</id>
<content type='text'>
[ Upstream commit b1064037e8ecf09d587b7b4966eebe0c362908e5 ]

The Ethernet PHY on the Cubieboard 4 and A80 Optimus have the RX
and TX delays enabled on the PHY, using pull-ups on the RXDLY and
TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: 98048143b7f8 ("ARM: dts: sun9i: cubieboard4: Enable GMAC")
Fixes: bc9bd03a44f9 ("ARM: dts: sun9i: a80-optimus: Enable GMAC")
Signed-off-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Signed-off-by: Maxime Ripard &lt;maxime@cerno.tech&gt;
Acked-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Link: https://lore.kernel.org/r/20201024162515.30032-7-wens@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit b1064037e8ecf09d587b7b4966eebe0c362908e5 ]

The Ethernet PHY on the Cubieboard 4 and A80 Optimus have the RX
and TX delays enabled on the PHY, using pull-ups on the RXDLY and
TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: 98048143b7f8 ("ARM: dts: sun9i: cubieboard4: Enable GMAC")
Fixes: bc9bd03a44f9 ("ARM: dts: sun9i: a80-optimus: Enable GMAC")
Signed-off-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Signed-off-by: Maxime Ripard &lt;maxime@cerno.tech&gt;
Acked-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Link: https://lore.kernel.org/r/20201024162515.30032-7-wens@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHY</title>
<updated>2020-11-24T12:29:03+00:00</updated>
<author>
<name>Chen-Yu Tsai</name>
<email>wens@csie.org</email>
</author>
<published>2020-10-24T16:25:11+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=6cb50545fe31e53c8a179bfaff397fb68000f934'/>
<id>6cb50545fe31e53c8a179bfaff397fb68000f934</id>
<content type='text'>
[ Upstream commit 57dbe558457bf4042169bc1f334e3b53a8480a1c ]

The Ethernet PHY on the Bananapi M3 and Cubietruck Plus have the RX
and TX delays enabled on the PHY, using pull-ups on the RXDLY and
TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: 039359948a4b ("ARM: dts: sun8i: a83t: Enable Ethernet on two boards")
Signed-off-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Signed-off-by: Maxime Ripard &lt;maxime@cerno.tech&gt;
Acked-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Link: https://lore.kernel.org/r/20201024162515.30032-6-wens@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 57dbe558457bf4042169bc1f334e3b53a8480a1c ]

The Ethernet PHY on the Bananapi M3 and Cubietruck Plus have the RX
and TX delays enabled on the PHY, using pull-ups on the RXDLY and
TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: 039359948a4b ("ARM: dts: sun8i: a83t: Enable Ethernet on two boards")
Signed-off-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Signed-off-by: Maxime Ripard &lt;maxime@cerno.tech&gt;
Acked-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Link: https://lore.kernel.org/r/20201024162515.30032-6-wens@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: dts: sun8i: h3: orangepi-plus2e: Enable RGMII RX/TX delay on Ethernet PHY</title>
<updated>2020-11-24T12:29:03+00:00</updated>
<author>
<name>Chen-Yu Tsai</name>
<email>wens@csie.org</email>
</author>
<published>2020-10-24T16:25:10+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=cecaad1d3f48f3f4f027ca270ed86c4bf77156d6'/>
<id>cecaad1d3f48f3f4f027ca270ed86c4bf77156d6</id>
<content type='text'>
[ Upstream commit e080ab31a0aa126b0a7e4f67f2b01b371b852c88 ]

The Ethernet PHY on the Orange Pi Plus 2E has the RX and TX delays
enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)")
Fixes: 7a78ef92cdc5 ("ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E")
Signed-off-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Signed-off-by: Maxime Ripard &lt;maxime@cerno.tech&gt;
Tested-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Acked-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Link: https://lore.kernel.org/r/20201024162515.30032-5-wens@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit e080ab31a0aa126b0a7e4f67f2b01b371b852c88 ]

The Ethernet PHY on the Orange Pi Plus 2E has the RX and TX delays
enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)")
Fixes: 7a78ef92cdc5 ("ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E")
Signed-off-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Signed-off-by: Maxime Ripard &lt;maxime@cerno.tech&gt;
Tested-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Acked-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Link: https://lore.kernel.org/r/20201024162515.30032-5-wens@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHY</title>
<updated>2020-11-24T12:29:03+00:00</updated>
<author>
<name>Chen-Yu Tsai</name>
<email>wens@csie.org</email>
</author>
<published>2020-10-24T16:25:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ec268dd970a58aa0bb223017e9cd1aadcd3c0350'/>
<id>ec268dd970a58aa0bb223017e9cd1aadcd3c0350</id>
<content type='text'>
[ Upstream commit f94f78bd93f567c022f594589dbeecdf59931365 ]

The Ethernet PHY on the Bananapi M1+ has the RX and TX delays
enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: 04c85ecad32a ("ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board")
Signed-off-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Signed-off-by: Maxime Ripard &lt;maxime@cerno.tech&gt;
Acked-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Link: https://lore.kernel.org/r/20201024162515.30032-4-wens@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit f94f78bd93f567c022f594589dbeecdf59931365 ]

The Ethernet PHY on the Bananapi M1+ has the RX and TX delays
enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: 04c85ecad32a ("ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board")
Signed-off-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Signed-off-by: Maxime Ripard &lt;maxime@cerno.tech&gt;
Acked-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Link: https://lore.kernel.org/r/20201024162515.30032-4-wens@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: dts: sun7i: cubietruck: Enable RGMII RX/TX delay on Ethernet PHY</title>
<updated>2020-11-24T12:29:03+00:00</updated>
<author>
<name>Chen-Yu Tsai</name>
<email>wens@csie.org</email>
</author>
<published>2020-10-24T16:25:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=303691562f8f16aed15d6142de8ecfd4382d7d08'/>
<id>303691562f8f16aed15d6142de8ecfd4382d7d08</id>
<content type='text'>
[ Upstream commit 353c3de1303fc93032164402c0eb8550ecd6f154 ]

The Ethernet PHY on the Cubietruck has the RX and TX delays
enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: 67073d97672d ("ARM: dts: sun7i: cubietruck: Enable the GMAC")
Signed-off-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Signed-off-by: Maxime Ripard &lt;maxime@cerno.tech&gt;
Tested-by: Emilio López &lt;emilio@elopez.com.ar&gt;
Reviewed-by: Emilio López &lt;emilio@elopez.com.ar&gt;
Link: https://lore.kernel.org/r/20201024162515.30032-3-wens@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 353c3de1303fc93032164402c0eb8550ecd6f154 ]

The Ethernet PHY on the Cubietruck has the RX and TX delays
enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: 67073d97672d ("ARM: dts: sun7i: cubietruck: Enable the GMAC")
Signed-off-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Signed-off-by: Maxime Ripard &lt;maxime@cerno.tech&gt;
Tested-by: Emilio López &lt;emilio@elopez.com.ar&gt;
Reviewed-by: Emilio López &lt;emilio@elopez.com.ar&gt;
Link: https://lore.kernel.org/r/20201024162515.30032-3-wens@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHY</title>
<updated>2020-11-24T12:29:02+00:00</updated>
<author>
<name>Chen-Yu Tsai</name>
<email>wens@csie.org</email>
</author>
<published>2020-10-24T16:25:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b55bc15117d6674044facc5c4a8018976597316f'/>
<id>b55bc15117d6674044facc5c4a8018976597316f</id>
<content type='text'>
[ Upstream commit e76724153f5b4539802cc21b2c6131058668a1c6 ]

The Ethernet PHY on the A31 Hummingbird has the RX and TX delays
enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: c220aec2bb79 ("ARM: dts: sun6i: Add Merrii A31 Hummingbird support")
Signed-off-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Signed-off-by: Maxime Ripard &lt;maxime@cerno.tech&gt;
Acked-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Link: https://lore.kernel.org/r/20201024162515.30032-2-wens@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit e76724153f5b4539802cc21b2c6131058668a1c6 ]

The Ethernet PHY on the A31 Hummingbird has the RX and TX delays
enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins.

Fix the phy-mode description to correct reflect this so that the
implementation doesn't reconfigure the delays incorrectly. This
happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
rx/tx delay config").

Fixes: c220aec2bb79 ("ARM: dts: sun6i: Add Merrii A31 Hummingbird support")
Signed-off-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Signed-off-by: Maxime Ripard &lt;maxime@cerno.tech&gt;
Acked-by: Jernej Skrabec &lt;jernej.skrabec@siol.net&gt;
Link: https://lore.kernel.org/r/20201024162515.30032-2-wens@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
