linux-stable.git/arch/arm/boot, branch v5.4.49 Linux kernel stable tree ARM: dts: sun8i-h2-plus-bananapi-m2-zero: Fix led polarity 2020-06-24T15:50:20+00:00 Vincent Stehlé vincent.stehle@laposte.net 2020-04-11T17:48:43+00:00 7acbadd1aa294b422657f90d3349f20c06dae541 [ Upstream commit 34b6826df7462c541752cf8b1de2691b26d78ae0 ] The PWR-LED on the bananapi m2 zero board is on when gpio PL10 is low. This has been verified on a board and in the schematics [1]. [1]: http://wiki.banana-pi.org/Banana_Pi_BPI-M2_ZERO#Documents Fixes: 8b8061fcbfae ("ARM: dts: sun8i: h2+: add support for Banana Pi M2 Zero board") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Maxime Ripard <mripard@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 34b6826df7462c541752cf8b1de2691b26d78ae0 ]

The PWR-LED on the bananapi m2 zero board is on when gpio PL10 is low.
This has been verified on a board and in the schematics [1].

[1]: http://wiki.banana-pi.org/Banana_Pi_BPI-M2_ZERO#Documents

Fixes: 8b8061fcbfae ("ARM: dts: sun8i: h2+: add support for Banana Pi M2 Zero board")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
arm64: dts: fvp/juno: Fix node address fields 2020-06-24T15:50:15+00:00 Andre Przywara andre.przywara@arm.com 2020-05-13T10:29:58+00:00 24911d387b840464356be309a5362bcb322a8302 [ Upstream commit bb5cce12ac717c7462217cd493ed701d12d6dbce ] The Arm Ltd. boards were using an outdated address convention in the DT node names, by separating the high from the low 32-bits of an address by a comma. Remove the comma from the node name suffix to be DT spec compliant. Link: https://lore.kernel.org/r/20200513103016.130417-3-andre.przywara@arm.com Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit bb5cce12ac717c7462217cd493ed701d12d6dbce ]

The Arm Ltd. boards were using an outdated address convention in the DT
node names, by separating the high from the low 32-bits of an address by
a comma.

Remove the comma from the node name suffix to be DT spec compliant.

Link: https://lore.kernel.org/r/20200513103016.130417-3-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: stm32: Add missing ethernet PHY reset on AV96 2020-06-24T15:50:10+00:00 Marek Vasut marex@denx.de 2020-04-22T10:45:58+00:00 bde2d5d443c436a046591521d50441e2d1020150 [ Upstream commit 010ca9fe500bfe365860b50220ff80541c18f0e1 ] Add PHY reset GPIO on AV96 ethernet PHY. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 010ca9fe500bfe365860b50220ff80541c18f0e1 ]

Add PHY reset GPIO on AV96 ethernet PHY.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: renesas: Fix IOMMU device node names 2020-06-24T15:50:09+00:00 Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com 2020-04-21T09:35:56+00:00 8908c555e06e5ccb56869a405d9e22caffad646c [ Upstream commit ae990a1de014396ffc8d0fcc31b6888c9b0ce59a ] Fix IOMMU device node names as "iommu@". Fixes: bbb44da0b595 ("ARM: dts: r8a7743: Add IPMMU DT nodes") Fixes: 0dcba3de5835 ("ARM: dts: r8a7745: Add IPMMU DT nodes") Fixes: 350ae49b97c4 ("ARM: dts: r8a7744: Add IPMMU DT nodes") Fixes: 70496727c082 ("ARM: shmobile: r8a7790: Add IPMMU DT nodes") Fixes: f1951852ed17 ("ARM: shmobile: r8a7791: Add IPMMU DT nodes") Fixes: 098cb3a601e6 ("ARM: shmobile: r8a7793: Add IPMMU nodes") Fixes: 1cb2794f6082 ("ARM: shmobile: r8a7794: Add IPMMU DT nodes") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/1587461756-13317-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ae990a1de014396ffc8d0fcc31b6888c9b0ce59a ]

Fix IOMMU device node names as "iommu@".

Fixes: bbb44da0b595 ("ARM: dts: r8a7743: Add IPMMU DT nodes")
Fixes: 0dcba3de5835 ("ARM: dts: r8a7745: Add IPMMU DT nodes")
Fixes: 350ae49b97c4 ("ARM: dts: r8a7744: Add IPMMU DT nodes")
Fixes: 70496727c082 ("ARM: shmobile: r8a7790: Add IPMMU DT nodes")
Fixes: f1951852ed17 ("ARM: shmobile: r8a7791: Add IPMMU DT nodes")
Fixes: 098cb3a601e6 ("ARM: shmobile: r8a7793: Add IPMMU nodes")
Fixes: 1cb2794f6082 ("ARM: shmobile: r8a7794: Add IPMMU DT nodes")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/1587461756-13317-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: s5pv210: Set keep-power-in-suspend for SDHCI1 on Aries 2020-06-22T07:31:22+00:00 Jonathan Bakker xc-racer2@live.ca 2020-05-01T23:50:05+00:00 1d5144d7dc5db8c57174771945dc1d6c4266e8b2 commit 869d42e6eba821905e1a0950623aadafe1a6e6d3 upstream. SDHCI1 is connected to a BCM4329 WiFi/BT chip which requires power to be kept over suspend. As the surrounding hardware supports this, mark it as such. This fixes WiFi after a suspend/resume cycle. Fixes: 170642468a51 ("ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones") Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 869d42e6eba821905e1a0950623aadafe1a6e6d3 upstream.

SDHCI1 is connected to a BCM4329 WiFi/BT chip which requires
power to be kept over suspend.  As the surrounding hardware supports
this, mark it as such.  This fixes WiFi after a suspend/resume cycle.

Fixes: 170642468a51 ("ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: at91: sama5d2_ptc_ek: fix vbus pin 2020-06-22T07:31:22+00:00 Ludovic Desroches ludovic.desroches@microchip.com 2020-04-01T22:19:47+00:00 727111d44a591bdce3b4dc6e3d32c752e90da757 commit baa998aecb75c04d62be0a4ab6b724af6d73a0f9 upstream. The gpio property for the vbus pin doesn't match the pinctrl and is not correct. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Fixes: 42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board" Cc: stable@vger.kernel.org # 4.19 and later Link: https://lore.kernel.org/r/20200401221947.41502-1-ludovic.desroches@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit baa998aecb75c04d62be0a4ab6b724af6d73a0f9 upstream.

The gpio property for the vbus pin doesn't match the pinctrl and is
not correct.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: 42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board"
Cc: stable@vger.kernel.org # 4.19 and later
Link: https://lore.kernel.org/r/20200401221947.41502-1-ludovic.desroches@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: exynos: Fix GPIO polarity for thr GalaxyS3 CM36651 sensor's bus 2020-06-22T07:31:22+00:00 Marek Szyprowski m.szyprowski@samsung.com 2020-03-26T14:20:37+00:00 1bfcafbb4d1e93a1bb14978dcef84b1179cffe59 commit 8807d356bfea92b0a8f04ce421800ed83400cd22 upstream. GPIO lines for the CM36651 sensor I2C bus use the normal not the inverted polarity. This bug has been there since adding the CM36651 sensor by commit 85cb4e0bd229 ("ARM: dts: add cm36651 light/proximity sensor node for exynos4412-trats2"), but went unnoticed because the "i2c-gpio" driver ignored the GPIO polarity specified in the device-tree. The recent conversion of "i2c-gpio" driver to the new, descriptor based GPIO API, automatically made it the DT-specified polarity aware, what broke the CM36651 sensor operation. Fixes: 85cb4e0bd229 ("ARM: dts: add cm36651 light/proximity sensor node for exynos4412-trats2") CC: stable@vger.kernel.org # 4.16+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8807d356bfea92b0a8f04ce421800ed83400cd22 upstream.

GPIO lines for the CM36651 sensor I2C bus use the normal not the inverted
polarity. This bug has been there since adding the CM36651 sensor by
commit 85cb4e0bd229 ("ARM: dts: add cm36651 light/proximity sensor node
for exynos4412-trats2"), but went unnoticed because the "i2c-gpio"
driver ignored the GPIO polarity specified in the device-tree.

The recent conversion of "i2c-gpio" driver to the new, descriptor based
GPIO API, automatically made it the DT-specified polarity aware, what
broke the CM36651 sensor operation.

Fixes: 85cb4e0bd229 ("ARM: dts: add cm36651 light/proximity sensor node for exynos4412-trats2")
CC: stable@vger.kernel.org # 4.16+
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description 2020-06-17T14:40:37+00:00 Ludovic Desroches ludovic.desroches@microchip.com 2020-04-01T22:15:00+00:00 d3c4c5a4d3d86cff53239abe2bc9a0930cc33509 commit a1af7f36c70369b971ee1cf679dd68368dad23f0 upstream. Remove non-removable and mmc-ddr-1_8v properties from the sdmmc0 node which come probably from an unchecked copy/paste. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Fixes:42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board" Cc: stable@vger.kernel.org # 4.19 and later Link: https://lore.kernel.org/r/20200401221504.41196-1-ludovic.desroches@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a1af7f36c70369b971ee1cf679dd68368dad23f0 upstream.

Remove non-removable and mmc-ddr-1_8v properties from the sdmmc0
node which come probably from an unchecked copy/paste.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes:42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board"
Cc: stable@vger.kernel.org # 4.19 and later
Link: https://lore.kernel.org/r/20200401221504.41196-1-ludovic.desroches@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: bcm: HR2: Fix PPI interrupt types 2020-06-03T06:21:20+00:00 Hamish Martin hamish.martin@alliedtelesis.co.nz 2020-05-20T04:30:42+00:00 2de6df8df9bde3fda53083fa9d06b844ffbd60d5 [ Upstream commit be0ec060b54f0481fb95d59086c1484a949c903c ] These error messages are output when booting on a BCM HR2 system: GIC: PPI11 is secure or misconfigured GIC: PPI13 is secure or misconfigured Per ARM documentation these interrupts are triggered on a rising edge. See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1, Section 3.3.8 Interrupt Configuration Registers. The same issue was resolved for NSP systems in commit 5f1aa51c7a1e ("ARM: dts: NSP: Fix PPI interrupt types"). Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit be0ec060b54f0481fb95d59086c1484a949c903c ]

These error messages are output when booting on a BCM HR2 system:
    GIC: PPI11 is secure or misconfigured
    GIC: PPI13 is secure or misconfigured

Per ARM documentation these interrupts are triggered on a rising edge.
See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1,
Section 3.3.8 Interrupt Configuration Registers.

The same issue was resolved for NSP systems in commit 5f1aa51c7a1e
("ARM: dts: NSP: Fix PPI interrupt types").

Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file")
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: bcm2835-rpi-zero-w: Fix led polarity 2020-06-03T06:21:20+00:00 Vincent Stehlé vincent.stehle@laposte.net 2020-04-18T12:35:22+00:00 f8b161c3f3acafd965ba7f1b8c84886e8b5b9ef0 [ Upstream commit 58bb90ab415562eededb932455046924e65df342 ] The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low. This has been verified on a board and somewhat confirmed by both the GPIO name ("STATUS_LED_N") and the reduced schematics [1]. [1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 58bb90ab415562eededb932455046924e65df342 ]

The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low.

This has been verified on a board and somewhat confirmed by both the GPIO
name ("STATUS_LED_N") and the reduced schematics [1].

[1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf

Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>