linux-stable.git/arch/arm/boot, branch v5.4.48 Linux kernel stable tree ARM: dts: s5pv210: Set keep-power-in-suspend for SDHCI1 on Aries 2020-06-22T07:31:22+00:00 Jonathan Bakker xc-racer2@live.ca 2020-05-01T23:50:05+00:00 1d5144d7dc5db8c57174771945dc1d6c4266e8b2 commit 869d42e6eba821905e1a0950623aadafe1a6e6d3 upstream. SDHCI1 is connected to a BCM4329 WiFi/BT chip which requires power to be kept over suspend. As the surrounding hardware supports this, mark it as such. This fixes WiFi after a suspend/resume cycle. Fixes: 170642468a51 ("ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones") Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 869d42e6eba821905e1a0950623aadafe1a6e6d3 upstream.

SDHCI1 is connected to a BCM4329 WiFi/BT chip which requires
power to be kept over suspend.  As the surrounding hardware supports
this, mark it as such.  This fixes WiFi after a suspend/resume cycle.

Fixes: 170642468a51 ("ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: at91: sama5d2_ptc_ek: fix vbus pin 2020-06-22T07:31:22+00:00 Ludovic Desroches ludovic.desroches@microchip.com 2020-04-01T22:19:47+00:00 727111d44a591bdce3b4dc6e3d32c752e90da757 commit baa998aecb75c04d62be0a4ab6b724af6d73a0f9 upstream. The gpio property for the vbus pin doesn't match the pinctrl and is not correct. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Fixes: 42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board" Cc: stable@vger.kernel.org # 4.19 and later Link: https://lore.kernel.org/r/20200401221947.41502-1-ludovic.desroches@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit baa998aecb75c04d62be0a4ab6b724af6d73a0f9 upstream.

The gpio property for the vbus pin doesn't match the pinctrl and is
not correct.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: 42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board"
Cc: stable@vger.kernel.org # 4.19 and later
Link: https://lore.kernel.org/r/20200401221947.41502-1-ludovic.desroches@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: exynos: Fix GPIO polarity for thr GalaxyS3 CM36651 sensor's bus 2020-06-22T07:31:22+00:00 Marek Szyprowski m.szyprowski@samsung.com 2020-03-26T14:20:37+00:00 1bfcafbb4d1e93a1bb14978dcef84b1179cffe59 commit 8807d356bfea92b0a8f04ce421800ed83400cd22 upstream. GPIO lines for the CM36651 sensor I2C bus use the normal not the inverted polarity. This bug has been there since adding the CM36651 sensor by commit 85cb4e0bd229 ("ARM: dts: add cm36651 light/proximity sensor node for exynos4412-trats2"), but went unnoticed because the "i2c-gpio" driver ignored the GPIO polarity specified in the device-tree. The recent conversion of "i2c-gpio" driver to the new, descriptor based GPIO API, automatically made it the DT-specified polarity aware, what broke the CM36651 sensor operation. Fixes: 85cb4e0bd229 ("ARM: dts: add cm36651 light/proximity sensor node for exynos4412-trats2") CC: stable@vger.kernel.org # 4.16+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8807d356bfea92b0a8f04ce421800ed83400cd22 upstream.

GPIO lines for the CM36651 sensor I2C bus use the normal not the inverted
polarity. This bug has been there since adding the CM36651 sensor by
commit 85cb4e0bd229 ("ARM: dts: add cm36651 light/proximity sensor node
for exynos4412-trats2"), but went unnoticed because the "i2c-gpio"
driver ignored the GPIO polarity specified in the device-tree.

The recent conversion of "i2c-gpio" driver to the new, descriptor based
GPIO API, automatically made it the DT-specified polarity aware, what
broke the CM36651 sensor operation.

Fixes: 85cb4e0bd229 ("ARM: dts: add cm36651 light/proximity sensor node for exynos4412-trats2")
CC: stable@vger.kernel.org # 4.16+
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: at91: sama5d2_ptc_ek: fix sdmmc0 node description 2020-06-17T14:40:37+00:00 Ludovic Desroches ludovic.desroches@microchip.com 2020-04-01T22:15:00+00:00 d3c4c5a4d3d86cff53239abe2bc9a0930cc33509 commit a1af7f36c70369b971ee1cf679dd68368dad23f0 upstream. Remove non-removable and mmc-ddr-1_8v properties from the sdmmc0 node which come probably from an unchecked copy/paste. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Fixes:42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board" Cc: stable@vger.kernel.org # 4.19 and later Link: https://lore.kernel.org/r/20200401221504.41196-1-ludovic.desroches@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a1af7f36c70369b971ee1cf679dd68368dad23f0 upstream.

Remove non-removable and mmc-ddr-1_8v properties from the sdmmc0
node which come probably from an unchecked copy/paste.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes:42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board"
Cc: stable@vger.kernel.org # 4.19 and later
Link: https://lore.kernel.org/r/20200401221504.41196-1-ludovic.desroches@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: bcm: HR2: Fix PPI interrupt types 2020-06-03T06:21:20+00:00 Hamish Martin hamish.martin@alliedtelesis.co.nz 2020-05-20T04:30:42+00:00 2de6df8df9bde3fda53083fa9d06b844ffbd60d5 [ Upstream commit be0ec060b54f0481fb95d59086c1484a949c903c ] These error messages are output when booting on a BCM HR2 system: GIC: PPI11 is secure or misconfigured GIC: PPI13 is secure or misconfigured Per ARM documentation these interrupts are triggered on a rising edge. See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1, Section 3.3.8 Interrupt Configuration Registers. The same issue was resolved for NSP systems in commit 5f1aa51c7a1e ("ARM: dts: NSP: Fix PPI interrupt types"). Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit be0ec060b54f0481fb95d59086c1484a949c903c ]

These error messages are output when booting on a BCM HR2 system:
    GIC: PPI11 is secure or misconfigured
    GIC: PPI13 is secure or misconfigured

Per ARM documentation these interrupts are triggered on a rising edge.
See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1,
Section 3.3.8 Interrupt Configuration Registers.

The same issue was resolved for NSP systems in commit 5f1aa51c7a1e
("ARM: dts: NSP: Fix PPI interrupt types").

Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file")
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: bcm2835-rpi-zero-w: Fix led polarity 2020-06-03T06:21:20+00:00 Vincent Stehlé vincent.stehle@laposte.net 2020-04-18T12:35:22+00:00 f8b161c3f3acafd965ba7f1b8c84886e8b5b9ef0 [ Upstream commit 58bb90ab415562eededb932455046924e65df342 ] The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low. This has been verified on a board and somewhat confirmed by both the GPIO name ("STATUS_LED_N") and the reduced schematics [1]. [1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 58bb90ab415562eededb932455046924e65df342 ]

The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low.

This has been verified on a board and somewhat confirmed by both the GPIO
name ("STATUS_LED_N") and the reduced schematics [1].

[1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf

Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts/imx6q-bx50v3: Set display interface clock parents 2020-06-03T06:21:20+00:00 Robert Beckett bob.beckett@collabora.com 2020-05-14T17:02:37+00:00 485bd944e0c6102f1a503754f38fc9ace4daf97d [ Upstream commit 665e7c73a7724a393b4ec92d1ae1e029925ef2b7 ] Avoid LDB and IPU DI clocks both using the same parent. LDB requires pasthrough clock to avoid breaking timing while IPU DI does not. Force IPU DI clocks to use IMX6QDL_CLK_PLL2_PFD0_352M as parent and LDB to use IMX6QDL_CLK_PLL5_VIDEO_DIV. This fixes an issue where attempting atomic modeset while using HDMI and display port at the same time causes LDB clock programming to destroy the programming of HDMI that was done during the same modeset. Cc: stable@vger.kernel.org Signed-off-by: Robert Beckett <bob.beckett@collabora.com> [Use IMX6QDL_CLK_PLL2_PFD0_352M instead of IMX6QDL_CLK_PLL2_PFD2_396M originally chosen by Robert Beckett to avoid affecting eMMC clock by DRM atomic updates] Signed-off-by: Ian Ray <ian.ray@ge.com> [Squash Robert's and Ian's commits for bisectability, update patch description and add stable tag] Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 665e7c73a7724a393b4ec92d1ae1e029925ef2b7 ]

Avoid LDB and IPU DI clocks both using the same parent. LDB requires
pasthrough clock to avoid breaking timing while IPU DI does not.

Force IPU DI clocks to use IMX6QDL_CLK_PLL2_PFD0_352M as parent
and LDB to use IMX6QDL_CLK_PLL5_VIDEO_DIV.

This fixes an issue where attempting atomic modeset while using
HDMI and display port at the same time causes LDB clock programming
to destroy the programming of HDMI that was done during the same
modeset.

Cc: stable@vger.kernel.org
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
[Use IMX6QDL_CLK_PLL2_PFD0_352M instead of IMX6QDL_CLK_PLL2_PFD2_396M
 originally chosen by Robert Beckett to avoid affecting eMMC clock
 by DRM atomic updates]
Signed-off-by: Ian Ray <ian.ray@ge.com>
[Squash Robert's and Ian's commits for bisectability, update patch
 description and add stable tag]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: 8970/1: decompressor: increase tag size 2020-06-03T06:21:18+00:00 Łukasz Stelmach l.stelmach@samsung.com 2020-04-27T19:36:11+00:00 f175897a960e4e6763efd96e7fa639fc09b1738b [ Upstream commit 2c962369d72f286659e6446919f88d69b943cb4d ] The size field of the tag header structure is supposed to be set to the size of a tag structure including the header. Fixes: c772568788b5f0 ("ARM: add additional table to compressed kernel") Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2c962369d72f286659e6446919f88d69b943cb4d ]

The size field of the tag header structure is supposed to be set to the
size of a tag structure including the header.

Fixes: c772568788b5f0 ("ARM: add additional table to compressed kernel")
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsi 2020-06-03T06:21:08+00:00 Johan Jonker jbx6244@gmail.com 2020-04-24T12:39:23+00:00 6ff411af068c78daa77951a0a34a3634adf5aa97 [ Upstream commit 855bdca1781c79eb661f89c8944c4a719ce720e8 ] A test with the command below gives these errors: arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-0: '#address-cells' is a required property arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-1: '#address-cells' is a required property arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-0: '#address-cells' is a required property arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-1: '#address-cells' is a required property The $nodename pattern for spi nodes is "^spi(@.*|-[0-9a-f])*$". To prevent warnings rename 'spi-0' and 'spi-1' pinctrl sub nodenames to 'spi0' and 'spi1' in 'rk322x.dtsi'. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/spi-controller.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200424123923.8192-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 855bdca1781c79eb661f89c8944c4a719ce720e8 ]

A test with the command below gives these errors:

arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-0:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-1:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-0:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-1:
'#address-cells' is a required property

The $nodename pattern for spi nodes is
"^spi(@.*|-[0-9a-f])*$". To prevent warnings rename
'spi-0' and 'spi-1' pinctrl sub nodenames to
'spi0' and 'spi1' in 'rk322x.dtsi'.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/spi-controller.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200424123923.8192-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: rockchip: swap clock-names of gpu nodes 2020-06-03T06:21:08+00:00 Johan Jonker jbx6244@gmail.com 2020-04-25T19:25:00+00:00 881dc2e22fb9896a4c21de11f27b1c78dd80cc51 [ Upstream commit b14f3898d2c25a9b47a61fb879d0b1f3af92c59b ] Dts files with Rockchip 'gpu' nodes were manually verified. In order to automate this process arm,mali-utgard.txt has been converted to yaml. In the new setup dtbs_check with arm,mali-utgard.yaml expects clock-names values in the same order, so fix that. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200425192500.1808-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b14f3898d2c25a9b47a61fb879d0b1f3af92c59b ]

Dts files with Rockchip 'gpu' nodes were manually verified.
In order to automate this process arm,mali-utgard.txt
has been converted to yaml. In the new setup dtbs_check with
arm,mali-utgard.yaml expects clock-names values
in the same order, so fix that.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200425192500.1808-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>