linux-stable.git/arch/arm/boot, branch v5.4.166 Linux kernel stable tree ARM: dts: BCM5301X: Add interrupt properties to GPIO node 2021-12-01T08:23:31+00:00 Florian Fainelli f.fainelli@gmail.com 2021-10-28T16:46:53+00:00 a848a22e9434f1f463b28423fdbb942d70957a04 [ Upstream commit 40f7342f0587639e5ad625adaa15efdd3cffb18f ] The GPIO controller is also an interrupt controller provider and is currently missing the appropriate 'interrupt-controller' and '#interrupt-cells' properties to denote that. Fixes: fb026d3de33b ("ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 40f7342f0587639e5ad625adaa15efdd3cffb18f ]

The GPIO controller is also an interrupt controller provider and is
currently missing the appropriate 'interrupt-controller' and
'#interrupt-cells' properties to denote that.

Fixes: fb026d3de33b ("ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: BCM5301X: Fix I2C controller interrupt 2021-12-01T08:23:31+00:00 Florian Fainelli f.fainelli@gmail.com 2021-10-27T19:37:29+00:00 03f7379e2c6917fa368d16eb41e432a69aaec170 [ Upstream commit 754c4050a00e802e122690112fc2c3a6abafa7e2 ] The I2C interrupt controller line is off by 32 because the datasheet describes interrupt inputs into the GIC which are for Shared Peripheral Interrupts and are starting at offset 32. The ARM GIC binding expects the SPI interrupts to be numbered from 0 relative to the SPI base. Fixes: bb097e3e0045 ("ARM: dts: BCM5301X: Add I2C support to the DT") Tested-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 754c4050a00e802e122690112fc2c3a6abafa7e2 ]

The I2C interrupt controller line is off by 32 because the datasheet
describes interrupt inputs into the GIC which are for Shared Peripheral
Interrupts and are starting at offset 32. The ARM GIC binding expects
the SPI interrupts to be numbered from 0 relative to the SPI base.

Fixes: bb097e3e0045 ("ARM: dts: BCM5301X: Add I2C support to the DT")
Tested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash 2021-11-26T09:47:16+00:00 Li Yang leoyang.li@nxp.com 2021-10-12T23:58:23+00:00 2f8cda43c41543202a74df51a30f45149180ec86 [ Upstream commit 05e63b48b20fa70726be505a7660d1a07bc1cffb ] We cannot list all the possible chips used in different board revisions, just use the generic "jedec,spi-nor" compatible instead. This also fixes dtbs_check error: ['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long Signed-off-by: Li Yang <leoyang.li@nxp.com> Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 05e63b48b20fa70726be505a7660d1a07bc1cffb ]

We cannot list all the possible chips used in different board revisions,
just use the generic "jedec,spi-nor" compatible instead.  This also
fixes dtbs_check error:
['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: ls1021a: move thermal-zones node out of soc/ 2021-11-26T09:47:15+00:00 Li Yang leoyang.li@nxp.com 2021-10-12T23:58:22+00:00 723c1af01c35f8909c6fc99ad4a5763f17ce792b [ Upstream commit 1ee1500ef717eefb5d9bdaf97905cb81b4e69aa4 ] This fixes dtbs-check error from simple-bus schema: soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... } From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1ee1500ef717eefb5d9bdaf97905cb81b4e69aa4 ]

This fixes dtbs-check error from simple-bus schema:
soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... }
        From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: omap: fix gpmc,mux-add-data type 2021-11-26T09:47:15+00:00 Roger Quadros rogerq@kernel.org 2021-10-07T12:08:30+00:00 e187c2f3f25ebf97191f8393cda9ada39e15b8d9 [ Upstream commit 51b9e22ffd3c4c56cbb7caae9750f70e55ffa603 ] gpmc,mux-add-data is not boolean. Fixes the below errors flagged by dtbs_check. "ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'" Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 51b9e22ffd3c4c56cbb7caae9750f70e55ffa603 ]

gpmc,mux-add-data is not boolean.

Fixes the below errors flagged by dtbs_check.

"ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'"

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: NSP: Fix mpcore, mmc node names 2021-11-26T09:47:14+00:00 Matthew Hagan mnhagan88@gmail.com 2021-08-29T22:37:48+00:00 51c94d6aee59e5b9a096bdd6a6e58a035e7bf8db [ Upstream commit 15a563d008ef9d04df525f0c476cd7d7127bb883 ] Running dtbs_check yielded the issues with bcm-nsp.dtsi. Firstly this patch fixes the following message by appending "-bus" to the mpcore node name: mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Secondly mmc node name. The label name can remain as is. sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$' Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 15a563d008ef9d04df525f0c476cd7d7127bb883 ]

Running dtbs_check yielded the issues with bcm-nsp.dtsi.

Firstly this patch fixes the following message by appending "-bus" to
the mpcore node name:
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Secondly mmc node name. The label name can remain as is.
sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$'

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: stm32: fix SAI sub nodes register range 2021-11-17T08:48:43+00:00 Olivier Moysan olivier.moysan@foss.st.com 2021-09-24T16:02:21+00:00 baf5c1225eb202ceea25a587dfdc75f7f7de71a0 [ Upstream commit 6f87a74d31277f0896dcf8c0850ec14bde03c423 ] The STM32 SAI subblocks registers offsets are in the range 0x0004 (SAIx_CR1) to 0x0020 (SAIx_DR). The corresponding range length is 0x20 instead of 0x1c. Change reg property accordingly. Fixes: 5afd65c3a060 ("ARM: dts: stm32: add sai support on stm32mp157c") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6f87a74d31277f0896dcf8c0850ec14bde03c423 ]

The STM32 SAI subblocks registers offsets are in the range
0x0004 (SAIx_CR1) to 0x0020 (SAIx_DR).
The corresponding range length is 0x20 instead of 0x1c.
Change reg property accordingly.

Fixes: 5afd65c3a060 ("ARM: dts: stm32: add sai support on stm32mp157c")

Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
arm: dts: omap3-gta04a4: accelerometer irq fix 2021-11-17T08:48:42+00:00 Andreas Kemnade andreas@kemnade.info 2021-10-01T07:34:15+00:00 543d85602f9c0ee1e2260e217bb6c132a955cce7 [ Upstream commit 884ea75d79a36faf3731ad9d6b9c29f58697638d ] Fix typo in pinctrl. It did only work because the bootloader seems to have initialized it. Fixes: ee327111953b ("ARM: dts: omap3-gta04: Define and use bma180 irq pin") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 884ea75d79a36faf3731ad9d6b9c29f58697638d ]

Fix typo in pinctrl. It did only work because the bootloader
seems to have initialized it.

Fixes: ee327111953b ("ARM: dts: omap3-gta04: Define and use bma180 irq pin")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: at91: tse850: the emac<->phy interface is rmii 2021-11-17T08:48:41+00:00 Peter Rosin peda@axentia.se 2021-09-20T20:37:38+00:00 dd49dee254dbb1dffa1c22c20668a4751f0a6908 [ Upstream commit dcdbc335a91a26e022a803e1a6b837266989c032 ] This went unnoticed until commit 7897b071ac3b ("net: macb: convert to phylink") which tickled the problem. The sama5d3 emac has never been capable of rgmii, and it all just happened to work before that commit. Fixes: 21dd0ece34c2 ("ARM: dts: at91: add devicetree for the Axentia TSE-850") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/ea781f5e-422f-6cbf-3cf4-d5a7bac9392d@axentia.se Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit dcdbc335a91a26e022a803e1a6b837266989c032 ]

This went unnoticed until commit 7897b071ac3b ("net: macb: convert
to phylink") which tickled the problem. The sama5d3 emac has never
been capable of rgmii, and it all just happened to work before that
commit.

Fixes: 21dd0ece34c2 ("ARM: dts: at91: add devicetree for the Axentia TSE-850")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/ea781f5e-422f-6cbf-3cf4-d5a7bac9392d@axentia.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHY 2021-11-17T08:48:41+00:00 Marijn Suijten marijn.suijten@somainline.org 2021-08-30T17:57:39+00:00 50eca29537b0712eafe9282ac2f7a61f4de5a220 [ Upstream commit 8ccecf6c710b8c048eecc65709640642e5357d6e ] According to YAML validation, and for a future patchset putting this xo_board reference clock to use as VCO reference parent, add the missing clock to dsi_phy0. Fixes: 5a9fc531f6ec ("ARM: dts: msm8974: add display support") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210830175739.143401-1-marijn.suijten@somainline.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8ccecf6c710b8c048eecc65709640642e5357d6e ]

According to YAML validation, and for a future patchset putting this
xo_board reference clock to use as VCO reference parent, add the missing
clock to dsi_phy0.

Fixes: 5a9fc531f6ec ("ARM: dts: msm8974: add display support")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210830175739.143401-1-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>