linux-stable.git/arch/arm/boot, branch v5.4.151 Linux kernel stable tree ARM: tegra: tamonten: Fix UART pad setting 2021-09-22T10:26:32+00:00 Andreas Obergschwandtner andreas.obergschwandtner@gmail.com 2021-07-29T14:42:26+00:00 a6b69a76c347c18210c2355ea6e6a3220a24ca49 [ Upstream commit 2270ad2f4e123336af685ecedd1618701cb4ca1e ] This patch fixes the tristate and pullup configuration for UART 1 to 3 on the Tamonten SOM. Signed-off-by: Andreas Obergschwandtner <andreas.obergschwandtner@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2270ad2f4e123336af685ecedd1618701cb4ca1e ]

This patch fixes the tristate and pullup configuration for UART 1 to 3
on the Tamonten SOM.

Signed-off-by: Andreas Obergschwandtner <andreas.obergschwandtner@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: imx53-ppd: Fix ACHC entry 2021-09-22T10:26:31+00:00 Sebastian Reichel sebastian.reichel@collabora.com 2021-08-02T17:23:08+00:00 52f8a30730ee08511af012446cfafb6c9b382cbe [ Upstream commit cd7cd5b716d594e27a933c12f026d4f2426d7bf4 ] PPD has only one ACHC device, which effectively is a Kinetis microcontroller. It has one SPI interface used for normal communication. Additionally it's possible to flash the device firmware using NXP's EzPort protocol by correctly driving a second chip select pin and the device reset pin. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20210802172309.164365-3-sebastian.reichel@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit cd7cd5b716d594e27a933c12f026d4f2426d7bf4 ]

PPD has only one ACHC device, which effectively is a Kinetis
microcontroller. It has one SPI interface used for normal
communication. Additionally it's possible to flash the device
firmware using NXP's EzPort protocol by correctly driving a
second chip select pin and the device reset pin.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210802172309.164365-3-sebastian.reichel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: qcom: apq8064: correct clock names 2021-09-22T10:26:27+00:00 David Heidelberg david@ixit.cz 2021-07-07T13:14:53+00:00 4ee6cc0f52db33c74f3c5344455401db6ea0128c [ Upstream commit 0dc6c59892ead17a9febd11202c9f6794aac1895 ] Since new code doesn't take old clk names in account, it does fixes error: msm_dsi 4700000.mdss_dsi: dev_pm_opp_set_clkname: Couldn't find clock: -2 and following kernel oops introduced by b0530eb1191 ("drm/msm/dpu: Use OPP API to set clk/perf state"). Also removes warning about deprecated clock names. Tested against linux-5.10.y LTS on Nexus 7 2013. Reviewed-by: Brian Masney <masneyb@onstation.org> Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20210707131453.24041-1-david@ixit.cz Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0dc6c59892ead17a9febd11202c9f6794aac1895 ]

Since new code doesn't take old clk names in account, it does fixes
error:

msm_dsi 4700000.mdss_dsi: dev_pm_opp_set_clkname: Couldn't find clock: -2

and following kernel oops introduced by
b0530eb1191 ("drm/msm/dpu: Use OPP API to set clk/perf state").

Also removes warning about deprecated clock names.

Tested against linux-5.10.y LTS on Nexus 7 2013.

Reviewed-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20210707131453.24041-1-david@ixit.cz
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: 9105/1: atags_to_fdt: don't warn about stack size 2021-09-22T10:26:22+00:00 David Heidelberg david@ixit.cz 2021-08-09T18:07:30+00:00 0445da50b727138acf5f483d39a53bd1537ae1ff commit b30d0289de72c62516df03fdad8d53f552c69839 upstream. The merge_fdt_bootargs() function by definition consumes more than 1024 bytes of stack because it has a 1024 byte command line on the stack, meaning that we always get a warning when building this file: arch/arm/boot/compressed/atags_to_fdt.c: In function 'merge_fdt_bootargs': arch/arm/boot/compressed/atags_to_fdt.c:98:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] However, as this is the decompressor and we know that it has a very shallow call chain, and we do not actually risk overflowing the kernel stack at runtime here. This just shuts up the warning by disabling the warning flag for this file. Tested on Nexus 7 2012 builds. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b30d0289de72c62516df03fdad8d53f552c69839 upstream.

The merge_fdt_bootargs() function by definition consumes more than 1024
bytes of stack because it has a 1024 byte command line on the stack,
meaning that we always get a warning when building this file:

arch/arm/boot/compressed/atags_to_fdt.c: In function 'merge_fdt_bootargs':
arch/arm/boot/compressed/atags_to_fdt.c:98:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]

However, as this is the decompressor and we know that it has a very shallow
call chain, and we do not actually risk overflowing the kernel stack
at runtime here.

This just shuts up the warning by disabling the warning flag for this
file.

Tested on Nexus 7 2012 builds.

Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: meson8b: ec100: Fix the pwm regulator supply properties 2021-09-15T07:47:32+00:00 Anand Moon linux.amoon@gmail.com 2021-07-05T11:23:55+00:00 87f817c560e63b4b857281e8e5dd8c6be2eb0f34 [ Upstream commit 72ccc373b064ae3ac0c5b5f2306069b60ca118df ] After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs. Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply instead of dummy regulator. [ 7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree [ 7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed [ 7.117184] VCCK: supplied by regulator-dummy [ 7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT [ 7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled [ 7.118498] VDDEE: will resolve supply early: pwm [ 7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree [ 7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed [ 7.118553] VDDEE: supplied by regulator-dummy [ 7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT Fixes: 087a1d8b4e4c ("ARM: dts: meson8b: ec100: add the VDDEE regulator") Fixes: 3e7db1c1b7a3 ("ARM: dts: meson8b: ec100: improve the description of the regulators") Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210705112358.3554-4-linux.amoon@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 72ccc373b064ae3ac0c5b5f2306069b60ca118df ]

After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs.
Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply
instead of dummy regulator.

[    7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree
[    7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed
[    7.117184] VCCK: supplied by regulator-dummy
[    7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT
[    7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled
[    7.118498] VDDEE: will resolve supply early: pwm
[    7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree
[    7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed
[    7.118553] VDDEE: supplied by regulator-dummy
[    7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT

Fixes: 087a1d8b4e4c ("ARM: dts: meson8b: ec100: add the VDDEE regulator")
Fixes: 3e7db1c1b7a3 ("ARM: dts: meson8b: ec100: improve the description of the regulators")

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210705112358.3554-4-linux.amoon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: meson8b: mxq: Fix the pwm regulator supply properties 2021-09-15T07:47:32+00:00 Anand Moon linux.amoon@gmail.com 2021-07-05T11:23:54+00:00 e55d7cbe1fe2404bdf5c696bb2ec4db4eecebc09 [ Upstream commit 632062e540becbbcb067523ec8bcadb1239d9578 ] After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs. Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply instead of dummy regulator. Add missing pwm-supply for regulator-vcck regulator node. [ 7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree [ 7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed [ 7.117184] VCCK: supplied by regulator-dummy [ 7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT [ 7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled [ 7.118498] VDDEE: will resolve supply early: pwm [ 7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree [ 7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed [ 7.118553] VDDEE: supplied by regulator-dummy [ 7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT Fixes: dee51cd0d2e8 ("ARM: dts: meson8b: mxq: add the VDDEE regulator") Fixes: d94f60e3dfa0 ("ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805") Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210705112358.3554-3-linux.amoon@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 632062e540becbbcb067523ec8bcadb1239d9578 ]

After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs.
Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply
instead of dummy regulator.
Add missing pwm-supply for regulator-vcck regulator node.

[    7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree
[    7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed
[    7.117184] VCCK: supplied by regulator-dummy
[    7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT
[    7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled
[    7.118498] VDDEE: will resolve supply early: pwm
[    7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree
[    7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed
[    7.118553] VDDEE: supplied by regulator-dummy
[    7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT

Fixes: dee51cd0d2e8 ("ARM: dts: meson8b: mxq: add the VDDEE regulator")
Fixes: d94f60e3dfa0 ("ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805")

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210705112358.3554-3-linux.amoon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: meson8b: odroidc1: Fix the pwm regulator supply properties 2021-09-15T07:47:32+00:00 Anand Moon linux.amoon@gmail.com 2021-07-05T11:23:53+00:00 4b0bbc412b510b0668f02f259941468a2e93662f [ Upstream commit 876228e9f935f19c7afc7ba394d17e2ec9143b65 ] After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs. Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply instead of dummy regulator. [ 7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree [ 7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed [ 7.117184] VCCK: supplied by regulator-dummy [ 7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT [ 7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled [ 7.118498] VDDEE: will resolve supply early: pwm [ 7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree [ 7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed [ 7.118553] VDDEE: supplied by regulator-dummy [ 7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT Fixes: 524d96083b66 ("ARM: dts: meson8b: odroidc1: add the CPU voltage regulator") Fixes: 8bdf38be712d ("ARM: dts: meson8b: odroidc1: add the VDDEE regulator") Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> [narmstrong: fixed typo in commit s/observer/observe/] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210705112358.3554-2-linux.amoon@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 876228e9f935f19c7afc7ba394d17e2ec9143b65 ]

After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs.
Changes help link VCCK and VDDEE pwm regulator to 5V regulator supply
instead of dummy regulator.

[    7.117140] pwm-regulator regulator-vcck: Looking up pwm-supply from device tree
[    7.117153] pwm-regulator regulator-vcck: Looking up pwm-supply property in node /regulator-vcck failed
[    7.117184] VCCK: supplied by regulator-dummy
[    7.117194] regulator-dummy: could not add device link regulator.8: -ENOENT
[    7.117266] VCCK: 860 <--> 1140 mV at 986 mV, enabled
[    7.118498] VDDEE: will resolve supply early: pwm
[    7.118515] pwm-regulator regulator-vddee: Looking up pwm-supply from device tree
[    7.118526] pwm-regulator regulator-vddee: Looking up pwm-supply property in node /regulator-vddee failed
[    7.118553] VDDEE: supplied by regulator-dummy
[    7.118563] regulator-dummy: could not add device link regulator.9: -ENOENT

Fixes: 524d96083b66 ("ARM: dts: meson8b: odroidc1: add the CPU voltage regulator")
Fixes: 8bdf38be712d ("ARM: dts: meson8b: odroidc1: add the VDDEE regulator")

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[narmstrong: fixed typo in commit s/observer/observe/]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210705112358.3554-2-linux.amoon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: meson8: Use a higher default GPU clock frequency 2021-09-15T07:47:32+00:00 Martin Blumenstingl martin.blumenstingl@googlemail.com 2021-07-11T21:40:23+00:00 f7058060c01bd3a48ded0300b0f6398e70e1017d [ Upstream commit 44cf630bcb8c5ec78125805c9447dd5766792224 ] We are seeing "imprecise external abort (0x1406)" errors during boot (which then cause the whole board to hang) on Meson8 (but not Meson8m2). These are observed while trying to access the GPU's registers when the MALI clock is running at it's default setting of 24MHz. The 3.10 vendor kernel uses 318.75MHz as "default" GPU frequency. Using that makes the "imprecise external aborts" go away. Add the assigned-clocks and assigned-clock-rates properties to also bump the MALI clock to 318.75MHz before accessing any of it's registers. Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU") Reported-by: Demetris Ierokipides <ierokipides.dem@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210711214023.2163565-1-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 44cf630bcb8c5ec78125805c9447dd5766792224 ]

We are seeing "imprecise external abort (0x1406)" errors during boot
(which then cause the whole board to hang) on Meson8 (but not Meson8m2).
These are observed while trying to access the GPU's registers when the
MALI clock is running at it's default setting of 24MHz. The 3.10 vendor
kernel uses 318.75MHz as "default" GPU frequency. Using that makes the
"imprecise external aborts" go away.
Add the assigned-clocks and assigned-clock-rates properties to also bump
the MALI clock to 318.75MHz before accessing any of it's registers.

Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
Reported-by: Demetris Ierokipides <ierokipides.dem@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210711214023.2163565-1-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: aspeed-g6: Fix HVI3C function-group in pinctrl dtsi 2021-09-15T07:47:30+00:00 Dylan Hung dylan_hung@aspeedtech.com 2020-10-29T06:27:23+00:00 6c106c73208a9ac6a4e4e8a63f21c5447f13e817 [ Upstream commit 8c295b7f3d01359ff4336fcb6e406e6ed37957d6 ] The HVI3C shall be a group of I3C function, not an independent function. Correct the function name from "HVI3C" to "I3C". Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Fixes: f510f04c8c83 ("ARM: dts: aspeed: Add AST2600 pinmux nodes") Link: https://lore.kernel.org/r/20201029062723.20798-1-dylan_hung@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8c295b7f3d01359ff4336fcb6e406e6ed37957d6 ]

The HVI3C shall be a group of I3C function, not an independent function.
Correct the function name from "HVI3C" to "I3C".

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Fixes: f510f04c8c83 ("ARM: dts: aspeed: Add AST2600 pinmux nodes")
Link: https://lore.kernel.org/r/20201029062723.20798-1-dylan_hung@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ARM: dts: nomadik: Fix up interrupt controller node names 2021-08-26T12:36:14+00:00 Sudeep Holla sudeep.holla@arm.com 2021-06-26T00:01:03+00:00 be7043679967516f41c576f36f9fafeffd737484 [ Upstream commit 47091f473b364c98207c4def197a0ae386fc9af1 ] Once the new schema interrupt-controller/arm,vic.yaml is added, we get the below warnings: arch/arm/boot/dts/ste-nomadik-nhk15.dt.yaml: intc@10140000: $nodename:0: 'intc@10140000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Fix the node names for the interrupt controller to conform to the standard node name interrupt-controller@.. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210617210825.3064367-2-sudeep.holla@arm.com Link: https://lore.kernel.org/r/20210626000103.830184-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 47091f473b364c98207c4def197a0ae386fc9af1 ]

Once the new schema interrupt-controller/arm,vic.yaml is added, we get
the below warnings:

	arch/arm/boot/dts/ste-nomadik-nhk15.dt.yaml:
	intc@10140000: $nodename:0: 'intc@10140000' does not match
	'^interrupt-controller(@[0-9a-f,]+)*$'

Fix the node names for the interrupt controller to conform
to the standard node name interrupt-controller@..

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210617210825.3064367-2-sudeep.holla@arm.com
Link: https://lore.kernel.org/r/20210626000103.830184-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>