linux-stable.git/arch/arm/boot, branch v4.9.76 Linux kernel stable tree ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend 2017-12-25T13:23:42+00:00 Reizer, Eyal eyalr@ti.com 2017-03-26T08:53:10+00:00 e0d13153057e3c9782e5f0ebb87ddd502ca58d94 [ Upstream commit 9bcf53f34a2c1cebc45cc12e273dcd5f51fbc099 ] mmc2 used for wl12xx was missing the keep-power-in suspend parameter. As a result the board couldn't reach suspend state. Signed-off-by: Eyal Reizer <eyalr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 9bcf53f34a2c1cebc45cc12e273dcd5f51fbc099 ]

mmc2 used for wl12xx was missing the keep-power-in suspend
parameter. As a result the board couldn't reach suspend state.

Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: ti: fix PCI bus dtc warnings 2017-12-25T13:23:40+00:00 Rob Herring robh@kernel.org 2017-03-22T02:03:01+00:00 5700ffc4accb9df36999fdf4cef5778160f34236 [ Upstream commit 7d79f6098d82f8c09914d7799bc96891ad9c3baf ] dtc recently added PCI bus checks. Fix these warnings. Signed-off-by: Rob Herring <robh@kernel.org> Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 7d79f6098d82f8c09914d7799bc96891ad9c3baf ]

dtc recently added PCI bus checks. Fix these warnings.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: omap3: logicpd-torpedo-37xx-devkit: Fix MMC1 cd-gpio 2017-12-05T10:24:31+00:00 Adam Ford aford173@gmail.com 2017-08-17T11:01:28+00:00 29bd7003134a3220119e7a75c4b06ac567f966e7 commit b7ace5ed8867ca54503727988adec6b20af54eeb upstream. Fixes commit 687c27676151 ("ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit") This patch corrects an issue where the cd-gpios was improperly setup using IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b7ace5ed8867ca54503727988adec6b20af54eeb upstream.

Fixes commit 687c27676151 ("ARM: dts: Add minimal support for LogicPD
Torpedo DM3730 devkit")

This patch corrects an issue where the cd-gpios was improperly setup
using IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: LogicPD Torpedo: Fix camera pin mux 2017-12-05T10:24:31+00:00 Adam Ford aford173@gmail.com 2017-05-11T17:21:19+00:00 64e916dea413f16e1a49ef3241f9a3435ca713d5 commit 56322e123235370f1449c7444e311cce857d12f5 upstream. Fix commit 05c4ffc3a266 ("ARM: dts: LogicPD Torpedo: Add MT9P031 Support") In the previous commit, I indicated that the only testing was done by showing the camera showed up when probing. This patch fixes an incorrect pin muxing on cam_d0, cam_d1 and cam_d2. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 56322e123235370f1449c7444e311cce857d12f5 upstream.

Fix commit 05c4ffc3a266 ("ARM: dts: LogicPD Torpedo: Add MT9P031 Support")
In the previous commit, I indicated that the only testing was done by
showing the camera showed up when probing.  This patch fixes an incorrect
pin muxing on cam_d0, cam_d1 and cam_d2.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: omap5-uevm: Allow bootloader to configure USB Ethernet MAC 2017-11-21T08:23:22+00:00 Tony Lindgren tony@atomide.com 2017-01-05T16:37:02+00:00 15a65b946c611fd1d57e9965964158b57b7a3209 [ Upstream commit e13a22a406f20322651b8c0847f4210bdef246d1 ] Note that with 9730 the wiring is different compared to 9514 found on beagleboard xm for example. On beagleboard xm we have: /sys/bus/usb/devices/1-2 hub /sys/bus/usb/devices/1-2.1 9514 While on omap5-uevm we have: /sys/bus/usb/devices/1-2 hub /sys/bus/usb/devices/1-3 9730 Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit e13a22a406f20322651b8c0847f4210bdef246d1 ]

Note that with 9730 the wiring is different compared to 9514 found on
beagleboard xm for example.

On beagleboard xm we have:

/sys/bus/usb/devices/1-2	hub
/sys/bus/usb/devices/1-2.1	9514

While on omap5-uevm we have:

/sys/bus/usb/devices/1-2	hub
/sys/bus/usb/devices/1-3	9730

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: Fix am335x and dm814x scm syscon to probe children 2017-11-21T08:23:22+00:00 Tony Lindgren tony@atomide.com 2017-01-05T19:10:40+00:00 db458f6e6110a3d568bfdf1ff350e0fe55a84170 [ Upstream commit 1aa09df0854efe16b7a80358a18f0a0bebafd246 ] Without these changes children of the scn syscon won't probe. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 1aa09df0854efe16b7a80358a18f0a0bebafd246 ]

Without these changes children of the scn syscon
won't probe.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: Fix compatible for ti81xx uarts for 8250 2017-11-21T08:23:22+00:00 Tony Lindgren tony@atomide.com 2017-01-05T19:17:30+00:00 f022fa1b61e5b769dd9409e92fa3ef34ae5914ad [ Upstream commit f62280efe8934a1275fd148ef302d1afec8cd3df ] When using 8250_omap driver, we need to specify the right compatible value for the UART to work on dm814x and dm816x. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit f62280efe8934a1275fd148ef302d1afec8cd3df ]

When using 8250_omap driver, we need to specify the right
compatible value for the UART to work on dm814x and dm816x.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "ARM: dts: imx53-qsb-common: fix FEC pinmux config" 2017-11-18T10:22:24+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2017-11-16T13:29:13+00:00 fd1ca9fea458ca5a846aa6e5f2203e7091be6107 This reverts commit 62b9fa2c436ffd9b87e6ed81df7f86c29fee092b which is commit 8b649e426336d7d4800ff9c82858328f4215ba01 upstream. Turns out not to be a good idea in the stable kernels for now as Patrick writes: As discussed for 4.4 stable queue this patch might break existing machines, if they use a different pinmux configuration with their own bootloader. Reported-by: Patrick Brünn <P.Bruenn@beckhoff.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This reverts commit 62b9fa2c436ffd9b87e6ed81df7f86c29fee092b which is
commit 8b649e426336d7d4800ff9c82858328f4215ba01 upstream.

Turns out not to be a good idea in the stable kernels for now as Patrick
writes:
	As discussed for 4.4 stable queue this patch might break
	existing machines, if they use a different pinmux configuration
	with their own bootloader.

Reported-by: Patrick Brünn <P.Bruenn@beckhoff.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: STiH410-family: fix wrong parent clock frequency 2017-11-15T14:53:16+00:00 Patrice Chotard patrice.chotard@st.com 2017-01-06T13:30:21+00:00 e793ad50d151c482b38e4e8851ff66c2a86e089b [ Upstream commit b9ec866d223f38eb0bf2a7c836e10031ee17f7af ] The clock parent was lower than child clock which is not correct. In some use case, it leads to division by zero. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit b9ec866d223f38eb0bf2a7c836e10031ee17f7af ]

The clock parent was lower than child clock which is not correct.
In some use case, it leads to division by zero.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: imx53-qsb-common: fix FEC pinmux config 2017-11-15T14:53:12+00:00 Patrick Bruenn p.bruenn@beckhoff.com 2017-01-25T05:25:48+00:00 62b9fa2c436ffd9b87e6ed81df7f86c29fee092b [ Upstream commit 8b649e426336d7d4800ff9c82858328f4215ba01 ] The pinmux configuration in device tree was different from manual muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the bootloader already did the correct pinmuxing for us. But recently u-boot is migrating to reuse device tree files from the kernel tree, so it seems to be better to have the correct pinmuxing in our files, too. Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 8b649e426336d7d4800ff9c82858328f4215ba01 ]

The pinmux configuration in device tree was different from manual
muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c
All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the
bootloader already did the correct pinmuxing for us.
But recently u-boot is migrating to reuse device tree files from the
kernel tree, so it seems to be better to have the correct pinmuxing in
our files, too.

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>