linux-stable.git/arch/arm/boot, branch v4.8.2

ARM: dts: MSM8660 remove flags from SPMI/MPP IRQs

2016-10-16T16:03:40+00:00

commit dcf5907e0e09a160a57160729f920add5df8e358 upstream.

The Qualcomm SPMI GPIO and MPP lines are problematic: the
are fetched from the main MFD driver with platform_get_irq()
which means that at this point they will all be assigned the
flags set up for the interrupts in the device tree.

That is problematic since these are flagged as rising edge
and an this point the interrupt descriptor is assigned a
rising edge, while the only thing the GPIO/MPP drivers really
do is issue irq_get_irqchip_state() on the line to read it
out and to provide a .to_irq() helper for *other* IRQ
consumers.

If another device tree node tries to flag the same IRQ
for use as something else than rising edge, the kernel
irqdomain core will protest like this:

  type mismatch, failed to map hwirq-NN for !

Which is what happens when the device tree defines two
contradictory flags for the same interrupt line.

To work around this and alleviate the problem, assign 0
as flag for the interrupts taken by the PM GPIO and MPP
drivers. This will lead to the flag being unset, and a
second consumer requesting rising, falling, both or level
interrupts will be respected. This is what the qcom-pm*.dtsi
files already do.

Switched to using the symbolic name IRQ_TYPE_NONE so that
we get this more readable.

This misconfiguration was caused by a copy/pasting the
APQ8064 set-up, the latter has been fixed in a separate
patch.

Tested with one of the SPMI GPIOs: after this I can
successfully request one of these GPIOs as falling edge
from the device tree.

Fixes: 0840ea9e4457 ("ARM: dts: add GPIO and MPP to MSM8660 PMIC")
Cc: Srinivas Kandagatla 
Cc: Stephen Boyd 
Cc: Björn Andersson 
Cc: Ivan T. Ivanov 
Cc: John Stultz 
Cc: Andy Gross 
Signed-off-by: Linus Walleij 
Signed-off-by: Andy Gross 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: MSM8064 remove flags from SPMI/MPP IRQs

2016-10-16T16:03:40+00:00

commit ca88696e8b73a9fa2b1de445747e9235c3a7bd50 upstream.

The Qualcomm PMIC GPIO and MPP lines are problematic: the
are fetched from the main MFD driver with platform_get_irq()
which means that at this point they will all be assigned the
flags set up for the interrupts in the device tree.

That is problematic since these are flagged as rising edge
and an this point the interrupt descriptor is assigned a
rising edge, while the only thing the GPIO/MPP drivers really
do is issue irq_get_irqchip_state() on the line to read it
out and to provide a .to_irq() helper for *other* IRQ
consumers.

If another device tree node tries to flag the same IRQ
for use as something else than rising edge, the kernel
irqdomain core will protest like this:

  type mismatch, failed to map hwirq-NN for !

Which is what happens when the device tree defines two
contradictory flags for the same interrupt line.

To work around this and alleviate the problem, assign 0
as flag for the interrupts taken by the PM GPIO and MPP
drivers. This will lead to the flag being unset, and a
second consumer requesting rising, falling, both or level
interrupts will be respected. This is what the qcom-pm*.dtsi
files already do.

Switched to using the symbolic name IRQ_TYPE_NONE so that
we get this more readable.

Fixes: bce360469676 ("ARM: dts: apq8064: add pm8921 mpp support")
Fixes: 874443fe9e33 ("ARM: dts: apq8064: Add pm8921 mfd and its gpio node")
Cc: Srinivas Kandagatla 
Cc: Stephen Boyd 
Cc: Björn Andersson 
Cc: Ivan T. Ivanov 
Cc: John Stultz 
Cc: Andy Gross 
Signed-off-by: Linus Walleij 
Signed-off-by: Andy Gross 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: mvebu: armada-390: add missing compatibility string and bracket

2016-10-16T16:03:40+00:00

commit 061492cfad9f11dbc32df741a7164f307b69b6e6 upstream.

The armada-390.dtsi was broken since the first patch which adds Device Tree
files for Armada 39x SoC was introduced.

Signed-off-by: Grzegorz Jaszczyk 
Acked-by: Gregory CLEMENT 
Fixes 538da83 ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board")
Signed-off-by: Greg Kroah-Hartman 

Signed-off-by: Gregory CLEMENT

Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

2016-10-02T22:23:00+00:00

Pull ARM fixes from Russell King:
 "Three relatively small fixes for ARM:

   - Roger noticed that dma_max_pfn() was calculating the upper limit
     wrongly, by adding the PFN offset of memory twice.

   - A fix from Robin to correct parsing of MPIDR values when the
     address size is larger than one BE32 unit.

   - A fix from Srinivas to ensure that we do not rely on the boot
     loader (or previous Linux kernel) setting the translation table
     base register a certain way in the decompressor, which can lead to
     crashes"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7
  ARM: 8617/1: dma: fix dma_max_pfn()
  ARM: 8616/1: dt: Respect property size when parsing CPUs

ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7

2016-10-02T19:05:14+00:00

If the bootloader uses the long descriptor format and jumps to
kernel decompressor code, TTBCR may not be in a right state.
Before enabling the MMU, it is required to clear the TTBCR.PD0
field to use TTBR0 for translation table walks.

The commit dbece45894d3a ("ARM: 7501/1: decompressor:
reset ttbcr for VMSA ARMv7 cores") does the reset of TTBCR.N, but
doesn't consider all the bits for the size of TTBCR.N.

Clear TTBCR.PD0 field and reset all the three bits of TTBCR.N to
indicate the use of TTBR0 and the correct base address width.

Fixes: dbece45894d3 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores")
Acked-by: Robin Murphy 
Signed-off-by: Srinivas Ramana 
Signed-off-by: Russell King

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-09-16T19:15:41+00:00

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are a couple of bugfixes for v4.8-rc.

  Most of them have actually been around for a while this time but for
  some reason didn't get applied early on.  The shmobile regulator fix
  is the only one that isn't completely obvious.

  Device tree changes:
   - archtimer interrupts must be level triggered (multiple platforms)
   - fix for USB and MMC clocks on STiH410
   - fix split DT repository in case of raspberry-pi 3
   - a new use of skeleton.dtsi on arm64 has crept in after that was
     removed.

  defconfig updates:
   - xilinx vdma has a new Kconfig symbol name
   - keystone requires CONFIG_NOP_USB_XCEIV since v4.8-rc1

  Code fixes:
   - fix regulator quirk on shmobile
   - suspend-to-ram regression on EXYNOS

  Maintainer updates:
   - Javier Martinez Canillas is now a reviewer for Samsung EXYNOS"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: keystone: defconfig: Fix USB configuration
  arm64: dts: Fix broken architected timer interrupt trigger
  ARM: multi_v7_defconfig: update XILINX_VDMA
  ARM64: dts: bcm: Use a symlink to R-Pi dtsi files from arch=arm
  ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi
  ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCI
  ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB)
  ARM: shmobile: fix regulator quirk for Gen2
  ARM: EXYNOS: Clear OF_POPULATED flag from PMU node in IRQ init callback
  MAINTAINERS: Add myself as reviewer for Samsung Exynos support

Merge tag 'sti-dt-fixes-for-v4.8-rcs' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into fixes

2016-09-09T15:58:40+00:00

Pull "Handle STiH410 interconnect clock required for EHCI/OHCI and SDHCI" from Patrice Chotard:

With the introduction of critical-clock support in v4.8, our developers'
default configuration is to run with 'clk_ignore_unused' removed.  This
patch-set ensures they can achieve successful boot when a) booting from
an SD Card and when b) booting using USB->Eth adaptors for NFS booting.

* tag 'sti-dt-fixes-for-v4.8-rcs' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
  ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCI
  ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB)

ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi

2016-09-09T15:46:18+00:00

This file is included from DTS files under arch/arm64 too (via
broadcom/bcm2837-rpi-3-b.dts and broadcom/bcm2837.dtsi). There is a desire
not to have skeleton.dtsi for ARM64. See commit 3ebee5a2e141 ("arm64: dts:
kill skeleton.dtsi") for rationale for its removal.

As well as the addition of #*-cells also requires adding the device_type to
the rpi memory node explicitly.

Note that this change results in the removal of an empty /aliases node from
bcm2835-rpi-a.dtb and bcm2835-rpi-a-plus.dtb. I have no hardware to check
if this is a problem or not.

It also results in some reordering of the nodes in the DTBs (the /aliases
and /memory nodes come later). This isn't supposed to matter but, again,
I've no hardware to check if it is true in this particular case.

Signed-off-by: Ian Campbell 
Acked-by: Mark Rutland 
Tested-by: Stefan Wahren 
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Mark Rutland 
Cc: Rob Herring 
Cc: Frank Rowand 
Cc: Eric Anholt 
Cc: Stephen Warren 
Cc: Lee Jones 
Cc: Gerd Hoffmann 
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rpi-kernel@lists.infradead.org
Cc: arm@kernel.org
Signed-off-by: Arnd Bergmann

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-09-08T19:05:15+00:00

Pull ARM SoC fixes from Olof Johansson:
 "This is a slightly larger batch of fixes that we've been sitting on a
  few -rcs.  Most of them are simple oneliners, but there are two sets
  that are slightly larger and worth pointing out:

   - A set of patches to OMAP to deal with hwmod for RTC on am33xx
     (beaglebone SoC, among others).  It's the only clock that ever has
     a valid offset of 0, so a new flag needed introduction once this
     problem was discovered.

   - A collection of CCI fixes for performance counters discovered once
     people started using it on X-Gene CPUs"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
  arm-cci: pmu: Fix typo in event name
  Revert "ARM: tegra: fix erroneous address in dts"
  ARM: dts: imx6qdl: Fix SPDIF regression
  ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx
  ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name
  ARM: dts: kirkwood: Fix PCIe label on OpenRD
  ARM: kirkwood: ib62x0: fix size of u-boot environment partition
  bus: arm-ccn: make event groups reliable
  bus: arm-ccn: fix hrtimer registration
  bus: arm-ccn: fix PMU interrupt flags
  ARM: tegra: Correct polarity for Tegra114 PMIC interrupt
  MAINTAINERS: add tree entry for ARM/UniPhier architecture
  ARM: sun5i: Fix typo in trip point temperature
  MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski
  ARM: imx6ul: populates platform device at .init_machine
  bus: arm-ccn: Add missing event attribute exclusions for host/guest
  bus: arm-ccn: Correct required arguments for XP PMU events
  bus: arm-ccn: Fix XP watchpoint settings bitmask
  bus: arm-ccn: Do not attempt to configure XPs for cycle counter
  bus: arm-ccn: Fix PMU handling of MN
  ...

ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCI

2016-09-08T13:51:12+00:00

The STiH4{07,10} platform contains some interconnect clocks which are used
by various IPs.  If these clocks aren't handled correctly by ST's SDHCI
driver MMC will break and the following output can be observed:

[   13.916949] mmc0: Timeout waiting for hardware interrupt.
[   13.922349] sdhci: =========== REGISTER DUMP (mmc0)===========
[   13.928175] sdhci: Sys addr: 0x00000000 | Version:  0x00001002
[   13.933999] sdhci: Blk size: 0x00007040 | Blk cnt:  0x00000001
[   13.939825] sdhci: Argument: 0x00fffff0 | Trn mode: 0x00000013
[   13.945650] sdhci: Present:  0x1fff0206 | Host ctl: 0x00000011
[   13.951475] sdhci: Power:    0x0000000f | Blk gap:  0x00000080
[   13.957300] sdhci: Wake-up:  0x00000000 | Clock:    0x00003f07
[   13.963126] sdhci: Timeout:  0x00000004 | Int stat: 0x00000000
[   13.968952] sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[   13.974777] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[   13.980602] sdhci: Caps:     0x21ed3281 | Caps_1:   0x00000000
[   13.986428] sdhci: Cmd:      0x0000063a | Max curr: 0x00000000
[   13.992252] sdhci: Host ctl2: 0x00000000
[   13.996166] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7c048200
[   14.001990] sdhci: ===========================================
[   14.009802] mmc0: Got data interrupt 0x02000000 even though no data operation was in progress.

Cc: stable@vger.kernel.org
Tested-by: Peter Griffin 
Signed-off-by: Lee Jones 
Acked-by: Patrice Chotard