linux-stable.git/arch/arm/boot, branch v4.4.19

ARM: dts: sunxi: Add a startup delay for fixed regulator enabled phys

2016-08-20T16:09:22+00:00

commit fc51b632c7b047c25807023b76f3877aed19c770 upstream.

It seems that recent kernels have a shorter timeout when scanning for
ethernet phys causing us to hit a timeout on boards where the phy's
regulator gets enabled just before scanning, which leads to non working
ethernet.

A 10ms startup delay seems to be enough to fix it, this commit adds a
20ms startup delay just to be safe.

This has been tested on a sun4i-a10-a1000 and sun5i-a10s-wobo-i5 board,
both of which have non-working ethernet on recent kernels without this
fix.

Signed-off-by: Hans de Goede 
Signed-off-by: Maxime Ripard 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys

2016-07-27T16:47:39+00:00

commit 929e604efa3dc0522214e0dc18984be23993e9f0 upstream.

When the support for the Marvell crypto engine was added in the Device
Tree of the various Armada 385 Device Tree files in commit
d716f2e837ac6 ("ARM: mvebu: define crypto SRAM ranges for all armada-38x
boards"), a typo was made in the MBus window attributes for the Armada
385 Linksys board: 0x09/0x05 are used instead of 0x19/0x15. This commit
fixes this typo, which makes the CESA engines operational on Armada 385
Linksys boards.

Reported-by: Terry Stockert 
Cc: Terry Stockert 
Cc: Imre Kaloz 
Cc: Boris Brezillon 
Fixes: d716f2e837ac6 ("ARM: mvebu: define crypto SRAM ranges for all armada-38x boards")
Signed-off-by: Thomas Petazzoni 
Signed-off-by: Gregory CLEMENT 
Signed-off-by: Greg Kroah-Hartman

ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13

2016-07-27T16:47:38+00:00

commit 5fc39d347267bd029fcc9099c70e2fe2d53130e9 upstream.

The sun4i-timer driver registers its sched_clock only if the machine is
compatible with "allwinner,sun5i-a13", "allwinner,sun5i-a10s" or
"allwinner,sun4i-a10".
Add the missing "allwinner,sun5i-a13" string to the machine compatible.

Signed-off-by: Boris Brezillon 
Fixes: 465a225fb2af ("ARM: sun5i: Add C.H.I.P DTS")
Signed-off-by: Maxime Ripard 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: exynos: Add interrupt line to MAX8997 PMIC on exynos4210-trats

2016-06-08T01:14:32+00:00

commit 330d12764e15f6e3e94ff34cda29db96d2589c24 upstream.

MAX8997 PMIC requires interrupt and fails probing without it.

Signed-off-by: Marek Szyprowski 
Fixes: d105f0b1215d ("ARM: dts: Add basic dts file for Samsung Trats board")
[k.kozlowski: Write commit message, add CC-stable]
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: at91: fix typo in sama5d2 PIN_PD24 description

2016-06-08T01:14:32+00:00

commit b1f3a3b03eb5f61b4051e2da9aa15653e705e111 upstream.

Fix a typo on PIN_PD24 for UTXD2 and FLEXCOM4_IO3 which were
wrongly linked to PIN_PD23).

Signed-off-by: Florian Vallee 
Fixes: 7f16cb676c00 ("ARM: at91/dt: add sama5d2 pinmux")
[nicolas.ferre@atmel.com: add commit message, changed subject]
Signed-off-by: Nicolas Ferre 
Signed-off-by: Greg Kroah-Hartman

ARM: mvebu: fix GPIO config on the Linksys boards

2016-06-08T01:14:32+00:00

commit 9800917cf92f5b5fe5cae706cb70db8d014f663c upstream.

Some of the GPIO configs were wrong in the submitted DTS files,
this patch fixes all affected boards.

Signed-off-by: Imre Kaloz 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Gregory CLEMENT

ARM: dts: at91: sam9x5: Fix the memory range assigned to the PMC

2016-05-19T00:06:49+00:00

commit aab0a4c83ceb344d2327194bf354820e50607af6 upstream.

The memory range assigned to the PMC (Power Management Controller) was
not including the PMC_PCR register which are used to control peripheral
clocks.

This was working fine thanks to the page granularity of ioremap(), but
started to fail when we switched to syscon/regmap, because regmap is
making sure that all accesses are falling into the reserved range.

Signed-off-by: Boris Brezillon 
Reported-by: Richard Genoud 
Tested-by: Richard Genoud 
Fixes: 863a81c3be1d ("clk: at91: make use of syscon to share PMC registers in several drivers")
Signed-off-by: Nicolas Ferre 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: pxa: fix dma engine node to pxa3xx-nand

2016-05-04T21:48:53+00:00

commit 07c6b2d01d351f0512ed7145625265e435ab3240 upstream.

Since the switch from mmp_pdma to pxa_dma driver for pxa architectures,
the pxa_dma requires 2 arguments, namely the requestor line and the
requested priority.

Fix the only left device node which was still passing only one argument,
making the pxa3xx-nand driver misbehave in a device-tree configuration,
ie. failing all data transfers.

Fixes: c943646d1f49 ("ARM: dts: pxa: add dma engine node to pxa3xx-nand")
Signed-off-by: Robert Jarzmik 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: armada-375: use armada-370-sata for SATA

2016-05-04T21:48:53+00:00

commit b3a7f31eb7375633cd6a742f19488fc5a4208b36 upstream.

The Armada 375 has the same SATA IP as Armada 370 and Armada XP, which
requires the PHY speed to be set in the LP_PHY_CTL register for SATA
hotplug to work.

Therefore, this commit updates the compatible string used to describe
the SATA IP in Armada 375 from marvell,orion-sata to
marvell,armada-370-sata.

Fixes: 4de59085091f753d08c8429d756b46756ab94665 ("ARM: mvebu: add Device Tree description of the Armada 375 SoC")
Signed-off-by: Lior Amsalem 
Signed-off-by: Thomas Petazzoni 
Reviewed-by: Andrew Lunn 
Signed-off-by: Gregory CLEMENT 
Signed-off-by: Greg Kroah-Hartman

ARM: mvebu: Correct unit address for linksys

2016-05-04T21:48:40+00:00

commit 199831c77c50e6913e893b6bc268ba9f4a9a2bf8 upstream.

The USB2 port for Armada 38x is defined to be at 58000, not at
50000.

Fixes: 2d0a7addbd10 ("ARM: Kirkwood: Add support for many Synology NAS devices")
Signed-off-by: Patrick Uiterwijk 
Acked-by: Imre Kaloz 
Signed-off-by: Gregory CLEMENT 
Signed-off-by: Greg Kroah-Hartman