linux-stable.git/arch/arm/boot, branch v4.4.18

ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys

2016-07-27T16:47:39+00:00

commit 929e604efa3dc0522214e0dc18984be23993e9f0 upstream.

When the support for the Marvell crypto engine was added in the Device
Tree of the various Armada 385 Device Tree files in commit
d716f2e837ac6 ("ARM: mvebu: define crypto SRAM ranges for all armada-38x
boards"), a typo was made in the MBus window attributes for the Armada
385 Linksys board: 0x09/0x05 are used instead of 0x19/0x15. This commit
fixes this typo, which makes the CESA engines operational on Armada 385
Linksys boards.

Reported-by: Terry Stockert 
Cc: Terry Stockert 
Cc: Imre Kaloz 
Cc: Boris Brezillon 
Fixes: d716f2e837ac6 ("ARM: mvebu: define crypto SRAM ranges for all armada-38x boards")
Signed-off-by: Thomas Petazzoni 
Signed-off-by: Gregory CLEMENT 
Signed-off-by: Greg Kroah-Hartman

ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13

2016-07-27T16:47:38+00:00

commit 5fc39d347267bd029fcc9099c70e2fe2d53130e9 upstream.

The sun4i-timer driver registers its sched_clock only if the machine is
compatible with "allwinner,sun5i-a13", "allwinner,sun5i-a10s" or
"allwinner,sun4i-a10".
Add the missing "allwinner,sun5i-a13" string to the machine compatible.

Signed-off-by: Boris Brezillon 
Fixes: 465a225fb2af ("ARM: sun5i: Add C.H.I.P DTS")
Signed-off-by: Maxime Ripard 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: exynos: Add interrupt line to MAX8997 PMIC on exynos4210-trats

2016-06-08T01:14:32+00:00

commit 330d12764e15f6e3e94ff34cda29db96d2589c24 upstream.

MAX8997 PMIC requires interrupt and fails probing without it.

Signed-off-by: Marek Szyprowski 
Fixes: d105f0b1215d ("ARM: dts: Add basic dts file for Samsung Trats board")
[k.kozlowski: Write commit message, add CC-stable]
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: at91: fix typo in sama5d2 PIN_PD24 description

2016-06-08T01:14:32+00:00

commit b1f3a3b03eb5f61b4051e2da9aa15653e705e111 upstream.

Fix a typo on PIN_PD24 for UTXD2 and FLEXCOM4_IO3 which were
wrongly linked to PIN_PD23).

Signed-off-by: Florian Vallee 
Fixes: 7f16cb676c00 ("ARM: at91/dt: add sama5d2 pinmux")
[nicolas.ferre@atmel.com: add commit message, changed subject]
Signed-off-by: Nicolas Ferre 
Signed-off-by: Greg Kroah-Hartman

ARM: mvebu: fix GPIO config on the Linksys boards

2016-06-08T01:14:32+00:00

commit 9800917cf92f5b5fe5cae706cb70db8d014f663c upstream.

Some of the GPIO configs were wrong in the submitted DTS files,
this patch fixes all affected boards.

Signed-off-by: Imre Kaloz 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Gregory CLEMENT

ARM: dts: at91: sam9x5: Fix the memory range assigned to the PMC

2016-05-19T00:06:49+00:00

commit aab0a4c83ceb344d2327194bf354820e50607af6 upstream.

The memory range assigned to the PMC (Power Management Controller) was
not including the PMC_PCR register which are used to control peripheral
clocks.

This was working fine thanks to the page granularity of ioremap(), but
started to fail when we switched to syscon/regmap, because regmap is
making sure that all accesses are falling into the reserved range.

Signed-off-by: Boris Brezillon 
Reported-by: Richard Genoud 
Tested-by: Richard Genoud 
Fixes: 863a81c3be1d ("clk: at91: make use of syscon to share PMC registers in several drivers")
Signed-off-by: Nicolas Ferre 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: pxa: fix dma engine node to pxa3xx-nand

2016-05-04T21:48:53+00:00

commit 07c6b2d01d351f0512ed7145625265e435ab3240 upstream.

Since the switch from mmp_pdma to pxa_dma driver for pxa architectures,
the pxa_dma requires 2 arguments, namely the requestor line and the
requested priority.

Fix the only left device node which was still passing only one argument,
making the pxa3xx-nand driver misbehave in a device-tree configuration,
ie. failing all data transfers.

Fixes: c943646d1f49 ("ARM: dts: pxa: add dma engine node to pxa3xx-nand")
Signed-off-by: Robert Jarzmik 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: armada-375: use armada-370-sata for SATA

2016-05-04T21:48:53+00:00

commit b3a7f31eb7375633cd6a742f19488fc5a4208b36 upstream.

The Armada 375 has the same SATA IP as Armada 370 and Armada XP, which
requires the PHY speed to be set in the LP_PHY_CTL register for SATA
hotplug to work.

Therefore, this commit updates the compatible string used to describe
the SATA IP in Armada 375 from marvell,orion-sata to
marvell,armada-370-sata.

Fixes: 4de59085091f753d08c8429d756b46756ab94665 ("ARM: mvebu: add Device Tree description of the Armada 375 SoC")
Signed-off-by: Lior Amsalem 
Signed-off-by: Thomas Petazzoni 
Reviewed-by: Andrew Lunn 
Signed-off-by: Gregory CLEMENT 
Signed-off-by: Greg Kroah-Hartman

ARM: mvebu: Correct unit address for linksys

2016-05-04T21:48:40+00:00

commit 199831c77c50e6913e893b6bc268ba9f4a9a2bf8 upstream.

The USB2 port for Armada 38x is defined to be at 58000, not at
50000.

Fixes: 2d0a7addbd10 ("ARM: Kirkwood: Add support for many Synology NAS devices")
Signed-off-by: Patrick Uiterwijk 
Acked-by: Imre Kaloz 
Signed-off-by: Gregory CLEMENT 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: AM43x-epos: Fix clk parent for synctimer

2016-05-04T21:48:40+00:00

commit cfe1580a6415bc37fd62d79eb8102a618f7650b2 upstream.

commit 55ee7017ee31 ("arm: omap2: board-generic: use omap4_local_timer_init
for AM437x") makes synctimer32k as the clocksource on AM43xx. By default
the synctimer32k is clocked by 32K RTC OSC on AM43xx. But this 32K RTC OSC
is not available on epos boards which makes it fail to boot.

Synctimer32k can also be clocked by a peripheral PLL, so making this as
clock parent for synctimer3k on epos boards.

Fixes: 55ee7017ee31 ("arm: omap2: board-generic: use omap4_local_timer_init for AM437x")
Reported-by: Nishanth Menon 
Signed-off-by: Lokesh Vutla 
Signed-off-by: Tony Lindgren 
Signed-off-by: Greg Kroah-Hartman