linux-stable.git/arch/arm/boot, branch v4.4.136

arm: dts: socfpga: fix GIC PPI warning

2018-05-30T05:49:11+00:00

[ Upstream commit 6d97d5aba08b26108f95dc9fb7bbe4d9436c769c ]

Fixes the warning "GIC: PPI13 is secure or misconfigured" by
changing the interrupt type from level_low to edge_raising

Signed-off-by: Philipp Puschmann 
Signed-off-by: Dinh Nguyen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Revert "ARM: dts: imx6qdl-wandboard: Fix audio channel swap"

2018-05-26T06:48:50+00:00

This reverts commit 9de3a3bfed892608dc30a6bc3fd8bdbeae5b51a5 which was
commit 79935915300c5eb88a0e94fa9148a7505c14a02a upstream.

As Ben points out:
	This depends on:

	commit 570c70a60f53ca737ead4e5966c446bf0d39fac9
	Author: Fabio Estevam 
	Date:   Wed Apr 5 11:32:34 2017 -0300

	    ASoC: sgtl5000: Allow LRCLK pad drive strength to be changed

which did not show up until 4.13, so this makes no sense to have in this
stable branch.

Reported-by: Ben Hutchings 
Cc: Fabio Estevam 
Cc: Shawn Guo 
Cc: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: at91: sama5d4: fix pinctrl compatible string

2018-04-24T07:32:05+00:00

commit 9a06757dcc8509c162ac00488c8c82fc98e04227 upstream.

The compatible string is incorrect. Add atmel,sama5d3-pinctrl since
it's the appropriate compatible string. Remove the
atmel,at91rm9200-pinctrl compatible string, this fallback is
useless, there are too many changes.

Signed-off-by: Santiago Esteban 
Signed-off-by: Ludovic Desroches 
Cc: stable@vger.kernel.org #v3.18
Signed-off-by: Alexandre Belloni 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: at91: at91sam9g25: fix mux-mask pinctrl property

2018-04-24T07:32:05+00:00

commit e8fd0adf105e132fd84545997bbef3d5edc2c9c1 upstream.

There are only 19 PIOB pins having primary names PB0-PB18. Not all of them
have a 'C' function. So the pinctrl property mask ends up being the same as the
other SoC of the at91sam9x5 series.

Reported-by: Marek Sieranski 
Signed-off-by: Nicolas Ferre 
Cc:  # v3.8+
Signed-off-by: Alexandre Belloni 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: ls1021a: add "fsl,ls1021a-esdhc" compatible string to esdhc node

2018-04-13T17:50:12+00:00

[ Upstream commit d5c7b4d5ac2237a6da7ced3adfe6b8bf769f8cc6 ]

Commit a22950c888e3 (mmc: sdhci-of-esdhc: add quirk
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL for ls1021a) added logic to the driver to
enable the broken timeout val quirk for ls1021a, but did not add the
corresponding compatible string to the device tree, so it didn't really
have any effect. Fix that.

Signed-off-by: Rasmus Villemoes 
Signed-off-by: Shawn Guo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: imx6qdl-wandboard: Fix audio channel swap

2018-04-13T17:50:06+00:00

[ Upstream commit 79935915300c5eb88a0e94fa9148a7505c14a02a ]

When running a stress playback/stop loop test on a mx6wandboard channel
swaps can be noticed randomly.

Increasing the SGTL5000 LRCLK pad strength to its maximum value fixes
the issue, so add the 'lrclk-strength' property to avoid the audio
channel swaps.

Signed-off-by: Fabio Estevam 
Signed-off-by: Shawn Guo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin

2018-04-13T17:50:05+00:00

[ Upstream commit 2fe4bff3516924a37e083e3211364abe59db1161 ]

Currently the following errors are seen:

[   14.015056] mc13xxx 0-0008: Failed to read IRQ status: -6
[   27.321093] mc13xxx 0-0008: Failed to read IRQ status: -6
[   27.411681] mc13xxx 0-0008: Failed to read IRQ status: -6
[   27.456281] mc13xxx 0-0008: Failed to read IRQ status: -6
[   30.527106] mc13xxx 0-0008: Failed to read IRQ status: -6
[   36.596900] mc13xxx 0-0008: Failed to read IRQ status: -6

Also when reading the interrupts via 'cat /proc/interrupts' the
PMIC GPIO interrupt counter does not stop increasing.

The reason for the storm of interrupts is that the PUS field of
register IOMUXC_SW_PAD_CTL_PAD_CSI0_DAT5 is currently configured as:
10 : 100k pullup

and the PMIC interrupt is being registered as IRQ_TYPE_LEVEL_HIGH type,
which is the correct type as per the MC34708 datasheet.

Use the default power on value for the IOMUX, which sets PUS field as:
00: 360k pull down

This prevents the spurious PMIC interrupts from happening.

Commit e1ffceb078c6 ("ARM: imx53: qsrb: fix PMIC interrupt level")
correctly described the irq type as IRQ_TYPE_LEVEL_HIGH, but
missed to update the IOMUX of the PMIC GPIO as pull down.

Fixes: e1ffceb078c6 ("ARM: imx53: qsrb: fix PMIC interrupt level")
Signed-off-by: Fabio Estevam 
Signed-off-by: Shawn Guo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Revert "ARM: dts: omap3-n900: Fix the audio CODEC's reset pin"

2018-04-08T09:52:02+00:00

This reverts commit ffa0a8252863189f0bc92d46c34588df3699f8f8 which was
commit 7be4b5dc7ffa9499ac6ef33a5ffa9ff43f9b7057 upstream.

It requires a driver that was not merged until 4.16, so remove it from
this stable tree as it is pointless.

Reported-by: Ben Hutchings 
Cc: Andrew F. Davis 
Cc: Tony Lindgren 
Cc: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Revert "ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin"

2018-04-08T09:52:01+00:00

This reverts commit 59df934af72fe74a64be6a0d8dba21375a5482bc which was
comit e153db03c6b7a035c797bcdf35262586f003ee93 upstream.

It requires a driver that was not merged until 4.16, so remove it from
this stable tree as it is pointless.

Reported-by: Ben Hutchings 
Cc: Andrew F. Davis 
Cc: Tony Lindgren 
Cc: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: am57xx-beagle-x15-common: Add overide powerhold property

2018-04-08T09:52:01+00:00

commit 1f166499ce006b3770a3166122eda64e160736ab upstream.

The PMICs have POWERHOLD set by default which prevents PMIC shutdown
even on DEV_CTRL On bit set to 0 as the Powerhold has higher priority.
So to enable pmic power off this property lets one over ride the default
value and enable pmic power off.

Signed-off-by: Keerthy 
Signed-off-by: Tony Lindgren 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman