linux-stable.git/arch/arm/boot, branch v4.2.6 Linux kernel stable tree ARM: ux500: modify initial levelshifter status 2015-11-09T22:37:35+00:00 Linus Walleij linus.walleij@linaro.org 2015-10-13T17:46:54+00:00 91295d8f1bd685a07d02d28f9c68944563798c3e commit 83bf6b13834d9c926905e45cdfda23fe218fc598 upstream. commit 1d8aca9df612f5751892fb2642d72536f2f48fd0 "ARM: ux500: fix MMC/SD card regression" fixed broken the level shifter: it should be default ON but became default OFF. Fixes: 1d8aca9df612 "ARM: ux500: fix MMC/SD card regression" Reported-and-tested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 83bf6b13834d9c926905e45cdfda23fe218fc598 upstream.

commit 1d8aca9df612f5751892fb2642d72536f2f48fd0
"ARM: ux500: fix MMC/SD card regression"
fixed broken the level shifter: it should be default ON
but became default OFF.

Fixes: 1d8aca9df612 "ARM: ux500: fix MMC/SD card regression"
Reported-and-tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: am57xx-beagle-x15: set VDD_SD to always-on 2015-11-09T22:37:35+00:00 Tomi Valkeinen tomi.valkeinen@ti.com 2015-09-25T13:02:03+00:00 c729a88ec197a135d1d5d9632d790f9a8672caaa commit 7e381ec6a36aa44f15fc1a76e6efb9e2cd942e61 upstream. LDO1 regulator (VDD_SD) is connected to SoC's vddshv8. vddshv8 needs to be kept always powered (see commit 5a0f93c6576a ("ARM: dts: Add am57xx-beagle-x15"), but at the moment VDD_SD is enabled/disabled depending on whether an SD card is inserted or not. This patch sets LDO1 regulator to always-on. This patch has a side effect of fixing another issue, HDMI DDC not working when SD card is not inserted: Why this happens is that the tpd12s015 (HDMI level shifter/ESD protection chip) has LS_OE GPIO input, which needs to be enabled for the HDMI DDC to work. LS_OE comes from gpio6_28. The pin that provides gpio6_28 is powered by vddshv8, and vddshv8 comes from VDD_SD. So when SD card is not inserted, VDD_SD is disabled, and LS_OE stays off. The proper fix for the HDMI DDC issue would be to maybe have the pinctrl framework manage the pin specific power. Apparently this fixes also a third issue (copy paste from Kishon's patch): ldo1_reg in addition to being connected to the io lines is also connected to the card detect line. On card removal, omap_hsmmc driver does a regulator_disable causing card detect line to be pulled down. This raises a card insertion interrupt and once the MMC core detects there is no card inserted, it does a regulator disable which again raises a card insertion interrupt. This happens in a loop causing infinite MMC interrupts. Fixes: 5a0f93c6576a ("ARM: dts: Add am57xx-beagle-x15") Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by: Louis McCarthy <compeoree@gmail.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7e381ec6a36aa44f15fc1a76e6efb9e2cd942e61 upstream.

LDO1 regulator (VDD_SD) is connected to SoC's vddshv8. vddshv8 needs to
be kept always powered (see commit 5a0f93c6576a ("ARM: dts: Add
am57xx-beagle-x15"), but at the moment VDD_SD is enabled/disabled
depending on whether an SD card is inserted or not.

This patch sets LDO1 regulator to always-on.

This patch has a side effect of fixing another issue, HDMI DDC not
working when SD card is not inserted:

Why this happens is that the tpd12s015 (HDMI level shifter/ESD
protection chip) has LS_OE GPIO input, which needs to be enabled for the
HDMI DDC to work. LS_OE comes from gpio6_28. The pin that provides
gpio6_28 is powered by vddshv8, and vddshv8 comes from VDD_SD.

So when SD card is not inserted, VDD_SD is disabled, and LS_OE stays
off.

The proper fix for the HDMI DDC issue would be to maybe have the pinctrl
framework manage the pin specific power.

Apparently this fixes also a third issue (copy paste from Kishon's
patch):

ldo1_reg in addition to being connected to the io lines is also
connected to the card detect line. On card removal, omap_hsmmc
driver does a regulator_disable causing card detect line to be
pulled down. This raises a card insertion interrupt and once the
MMC core detects there is no card inserted, it does a
regulator disable which again raises a card insertion interrupt.
This happens in a loop causing infinite MMC interrupts.

Fixes: 5a0f93c6576a ("ARM: dts: Add am57xx-beagle-x15")
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Louis McCarthy <compeoree@gmail.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: imx7d: Fix UART2 base address 2015-11-09T22:37:35+00:00 Fabio Estevam fabio.estevam@freescale.com 2015-09-24T19:18:12+00:00 ec5eb41be2f1183357ef23fbf268b7b203da02b8 commit 178b2d09afc05a46f68b190c6594f3a429bc2385 upstream. The UART2 memory space starts at address 0x30890000 (UART2_URXD). Fix it so that UART2 can be used. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Fixes: 949673450291 ("ARM: dts: add imx7d soc dtsi file") Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 178b2d09afc05a46f68b190c6594f3a429bc2385 upstream.

The UART2 memory space starts at address 0x30890000 (UART2_URXD).

Fix it so that UART2 can be used.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fixes: 949673450291 ("ARM: dts: add imx7d soc dtsi file")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: Fix audio card detection on Peach boards 2015-11-09T22:37:35+00:00 Alim Akhtar alim.akhtar@samsung.com 2015-10-12T19:32:53+00:00 64563f7547b4bb79153a3b43506d3351d9956f83 commit b8bb9baad27e455c467e8fac47eebadbe765c18f upstream. Since commit 2fad972d45c4 ("ARM: dts: Add mclk entry for Peach boards"), sound card detection is broken on peach boards and gives below errors: [ 3.630457] max98090 7-0010: MAX98091 REVID=0x51 [ 3.634233] max98090 7-0010: use default 2.8v micbias [ 3.640985] snow-audio sound: HiFi <-> 3830000.i2s mapping ok [ 3.645307] max98090 7-0010: Invalid master clock frequency [ 3.650824] snow-audio sound: ASoC: Peach-Pi-I2S-MAX98091 late_probe() failed: -22 [ 3.658914] snow-audio sound: snd_soc_register_card failed (-22) [ 3.664366] snow-audio: probe of sound failed with error -22 This patch adds missing assigned-clocks and assigned-clock-parents for pmu_system_controller node which is used as "mclk" for audio codec. Fixes: 2fad972d45c4 ("ARM: dts: Add mclk entry for Peach boards") Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b8bb9baad27e455c467e8fac47eebadbe765c18f upstream.

Since commit 2fad972d45c4 ("ARM: dts: Add mclk entry for Peach boards"),
sound card detection is broken on peach boards and gives below errors:

[    3.630457] max98090 7-0010: MAX98091 REVID=0x51
[    3.634233] max98090 7-0010: use default 2.8v micbias
[    3.640985] snow-audio sound: HiFi <-> 3830000.i2s mapping ok
[    3.645307] max98090 7-0010: Invalid master clock frequency
[    3.650824] snow-audio sound: ASoC: Peach-Pi-I2S-MAX98091 late_probe() failed: -22
[    3.658914] snow-audio sound: snd_soc_register_card failed (-22)
[    3.664366] snow-audio: probe of sound failed with error -22

This patch adds missing assigned-clocks and assigned-clock-parents for
pmu_system_controller node which is used as "mclk" for audio codec.

Fixes: 2fad972d45c4 ("ARM: dts: Add mclk entry for Peach boards")
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: berlin: change BG2Q's USB PHY compatible 2015-11-09T22:37:35+00:00 Thomas Hebb tommyhebb@gmail.com 2015-10-01T19:00:00+00:00 c5e282280f0cb12bdee0d0c78455a73c4e12995b commit 1f744fd317dc55cadd7132c57c499e3117aea01d upstream. Currently, BG2Q shares a compatible with BG2. This is incorrect, since BG2 and BG2Q use different USB PLL dividers. In reality, BG2Q shares a divider with BG2CD. Change BG2Q's USB PHY compatible string to reflect that. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1f744fd317dc55cadd7132c57c499e3117aea01d upstream.

Currently, BG2Q shares a compatible with BG2. This is incorrect, since
BG2 and BG2Q use different USB PLL dividers. In reality, BG2Q shares a
divider with BG2CD. Change BG2Q's USB PHY compatible string to reflect
that.

Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: mvebu: correct a385-db-ap compatible string 2015-11-09T22:37:35+00:00 Marcin Wojtas mw@semihalf.com 2015-10-15T01:17:08+00:00 589414cc5f2a62734217d1dd840cb1866e0dc8fc commit db347f1a5304d68c68c52f19971924b1e5842f3c upstream. This commit enables standby support on Armada 385 DB-AP board, because the PM initalization routine requires "marvell,armada380" compatible string for all Armada 38x-based platforms. Beside the compatible "marvell,armada38x" was wrong and should be fixed in the stable kernels too. [gregory.clement@free-electrons.com: add information, about the fixes] Fixes: e5ee12817e9ea ("ARM: mvebu: Add Armada 385 Access Point Development Board support") Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit db347f1a5304d68c68c52f19971924b1e5842f3c upstream.

This commit enables standby support on Armada 385 DB-AP board, because
the PM initalization routine requires "marvell,armada380" compatible
string for all Armada 38x-based platforms.

Beside the compatible "marvell,armada38x" was wrong and should be fixed
in the stable kernels too.

[gregory.clement@free-electrons.com: add information, about the fixes]
Fixes: e5ee12817e9ea ("ARM: mvebu: Add Armada 385 Access Point
Development Board support")
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: fix usb pin control for imx-rex dts 2015-10-22T21:49:17+00:00 Felipe F. Tonello eu@felipetonello.com 2015-09-16T17:40:32+00:00 47365d694f3bc4da33923aca12836b378caf4017 commit 0af822110871400908d5b6f83a8908c45f881d8f upstream. This fixes a duplicated pin control causing this error: imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_GPIO_1 already requested by regulators:regulator@2; cannot claim for 2184000.usb imx6q-pinctrl 20e0000.iomuxc: pin-137 (2184000.usb) status -22 imx6q-pinctrl 20e0000.iomuxc: could not request pin 137 (MX6Q_PAD_GPIO_1) from group usbotggrp on device 20e0000.iomuxc imx_usb 2184000.usb: Error applying setting, reverse things back imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D31 already requested by regulators:regulator@1; cannot claim for 2184200.usb imx6q-pinctrl 20e0000.iomuxc: pin-52 (2184200.usb) status -22 imx6q-pinctrl 20e0000.iomuxc: could not request pin 52 (MX6Q_PAD_EIM_D31) from group usbh1grp on device 20e0000.iomuxc imx_usb 2184200.usb: Error applying setting, reverse things back Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Fixes: e2047e33f2bd ("ARM: dts: add initial Rex Pro board support") Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 0af822110871400908d5b6f83a8908c45f881d8f upstream.

This fixes a duplicated pin control causing this error:

imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_GPIO_1 already
requested by regulators:regulator@2; cannot claim for 2184000.usb
imx6q-pinctrl 20e0000.iomuxc: pin-137 (2184000.usb) status -22
imx6q-pinctrl 20e0000.iomuxc: could not request pin 137
(MX6Q_PAD_GPIO_1) from group usbotggrp  on device 20e0000.iomuxc
imx_usb 2184000.usb: Error applying setting, reverse things
back
imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D31 already
requested by regulators:regulator@1; cannot claim for 2184200.usb
imx6q-pinctrl 20e0000.iomuxc: pin-52 (2184200.usb) status -22
imx6q-pinctrl 20e0000.iomuxc: could not request pin 52 (MX6Q_PAD_EIM_D31)
from group usbh1grp  on device 20e0000.iomuxc
imx_usb 2184200.usb: Error applying setting, reverse things
back

Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Fixes: e2047e33f2bd ("ARM: dts: add initial Rex Pro board support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: Fix wrong clock binding for sysmmu_fimd1_1 on exynos5420 2015-10-22T21:49:17+00:00 Joonyoung Shim jy0922.shim@samsung.com 2015-09-23T07:41:55+00:00 c6c5b607f5c297cdd48fc45415895f55459944af commit c7d2ecd9f64c351cb4d551f1f472d0fc09c3cae8 upstream. The sysmmu_fimd1_1 should bind the clock CLK_SMMU_FIMD1M1, not the clock CLK_SMMU_FIMD1M0. CLK_SMMU_FIMD1M0 is a clock for the sysmmu_fimd1_0. This wrong clock binding causes the problem that is blocked in iommu_map function when IOMMU is enabled and exynos-drm driver tries to allocate buffer via DMA mapping API on Odroid-XU3 board. Fixes: b70045167815 ("ARM: dts: add sysmmu nodes for exynos5420") Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c7d2ecd9f64c351cb4d551f1f472d0fc09c3cae8 upstream.

The sysmmu_fimd1_1 should bind the clock CLK_SMMU_FIMD1M1, not the clock
CLK_SMMU_FIMD1M0. CLK_SMMU_FIMD1M0 is a clock for the sysmmu_fimd1_0.

This wrong clock binding causes the problem that is blocked in iommu_map
function when IOMMU is enabled and exynos-drm driver tries to allocate
buffer via DMA mapping API on Odroid-XU3 board.

Fixes: b70045167815 ("ARM: dts: add sysmmu nodes for exynos5420")
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: sunxi: Raise minimum CPU voltage for sun7i-a20 to meet SoC specifications 2015-10-22T21:49:17+00:00 Timo Sigurdsson public_timo.s@silentcreek.de 2015-08-04T21:08:01+00:00 7bff4cf150f415aaa5587c1f0d9b8b6f9b3011e2 commit eaeef1ad9b6ea6df1d1220c254d9563da60cb9d1 upstream. sun7i-a20.dtsi contains a cpufreq operating point at 0.9 volts. The minimum CPU voltage for the Allwinner A20 SoC, however, is 1.0 volts. Thus, raise the voltage for the lowest operating point to 1.0 volts in order to stay within the SoC specifications. It is an undervolted setting that isn't stable across all SoCs and boards out there. Fixes: d96b7161916f ("ARM: dts: sun7i: Add cpu clock reference and operating points to dtsi") Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de> Acked-by: Iain Paton <ipaton0@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit eaeef1ad9b6ea6df1d1220c254d9563da60cb9d1 upstream.

sun7i-a20.dtsi contains a cpufreq operating point at 0.9 volts. The minimum
CPU voltage for the Allwinner A20 SoC, however, is 1.0 volts. Thus, raise
the voltage for the lowest operating point to 1.0 volts in order to stay
within the SoC specifications. It is an undervolted setting that isn't
stable across all SoCs and boards out there.

Fixes: d96b7161916f ("ARM: dts: sun7i: Add cpu clock reference and operating points to dtsi")
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
Acked-by: Iain Paton <ipaton0@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ARM: dts: omap3-beagle: make i2c3, ddc and tfp410 gpio work again 2015-10-22T21:49:16+00:00 Carl Frederik Werner frederik@cfbw.eu 2015-09-02T01:07:57+00:00 bb12eb239fcc1167735fb124a6778a4c15384682 commit 3a2fa775bd1d0579113666c1a2e37654a34018a0 upstream. Let's fix pinmux address of gpio 170 used by tfp410 powerdown-gpio. According to the OMAP35x Technical Reference Manual CONTROL_PADCONF_I2C3_SDA[15:0] 0x480021C4 mode0: i2c3_sda CONTROL_PADCONF_I2C3_SDA[31:16] 0x480021C4 mode4: gpio_170 the pinmux address of gpio 170 must be 0x480021C6. The former wrong address broke i2c3 (used by hdmi ddc), resulting in kernel message: omap_i2c 48060000.i2c: controller timed out Fixes: 8cecf52befd7 ("ARM: omap3-beagle.dts: add display information") Signed-off-by: Carl Frederik Werner <frederik@cfbw.eu> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3a2fa775bd1d0579113666c1a2e37654a34018a0 upstream.

Let's fix pinmux address of gpio 170 used by tfp410 powerdown-gpio.

According to the OMAP35x Technical Reference Manual
  CONTROL_PADCONF_I2C3_SDA[15:0]  0x480021C4 mode0: i2c3_sda
  CONTROL_PADCONF_I2C3_SDA[31:16] 0x480021C4 mode4: gpio_170
the pinmux address of gpio 170 must be 0x480021C6.

The former wrong address broke i2c3 (used by hdmi ddc), resulting in
kernel message:
  omap_i2c 48060000.i2c: controller timed out

Fixes: 8cecf52befd7 ("ARM: omap3-beagle.dts: add display information")
Signed-off-by: Carl Frederik Werner <frederik@cfbw.eu>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>