commit 7e9e20b1faab02357501553d7f4e3efec1b4cfd3 upstream.
Resolve a merge conflict with mmc refactoring aaa25a5a33cb ("ARM: dts:
unuse the slot-node and deprecate the supports-highspeed for dw-mmc in
exynos") by dropping the slot@0 nodes, moving its bus-width property to
the mmc node and replacing supports-highspeed with cap-{mmc,sd}-highspeed,
matching exynos5250-snow.
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Fixes: 53dd4138bb0a ("ARM: dts: Add exynos5250-spring device tree")
Signed-off-by: Andreas Faerber <afaerber@suse.de>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a74cd13b807029397f7232449df929bac11fb228 upstream. Fix Dove's register addresses of uart2 and uart3 nodes that seem to be broken since ages due to a copy-and-paste error. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98b80987c940956da48f0c703f60340128bb8521 upstream. After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091) the macb1 interface refuses to work properly because it tries to cling to address 0 which isn't able to communicate in broadcast with the mac anymore. The micrel phy on the board is actually configured to show up at address 1. Adding the phy node and its real address fixes the issue. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allwinner fixes for 4.0 There's a few fixes to merge for 4.0, one to add a select in the machine Kconfig option to fix a potential build failure, and two fixing cpufreq related issues. * tag 'sunxi-fixes-for-4.0' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sunxi: Remove overclocked/overvoltaged OPP ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage Signed-off-by: Olof Johansson <olof@lixom.net>
Fixes for omaps for the -rc cycle: - Fix a device tree based booting vs legacy booting regression for omap3 crypto hardware by adding the missing DMA channels. - Fix /sys/bus/soc/devices/soc0/family for am33xx devices. - Fix two timer issues that can cause hangs if the timer related hwmod data is missing like it often initially is for new SoCs. - Remove pcie hwmods entry from dts as that causes runtime PM to fail for the PHYs. - A paper bag type dts configuration fix for dm816x GPIO interrupts that I just noticed. This is most of the changes diffstat wise, but as it's a basic feature for connecting devices and things work otherwise, it should be fixed. * tag 'fixes-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix gpio interrupts for dm816x ARM: dts: dra7: remove ti,hwmod property from pcie phy ARM: OMAP: dmtimer: disable pm runtime on remove ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure ARM: OMAP2+: Fix socbus family info for AM33xx devices ARM: dts: omap3: Add missing dmas for crypto Signed-off-by: Olof Johansson <olof@lixom.net>
Late fix for v4.0 on the SoCFPGA platform: - Fix interrupt number for SPI1 interface * tag 'socfpga_fix_for_v4.0_2' of git://git.rocketboards.org/linux-socfpga-next: ARM: socfpga: dts: fix spi1 interrupt Signed-off-by: Olof Johansson <olof@lixom.net>
Without proper regulator support for individual boards, it is dangerous to have overclocked/overvoltaged OPPs in the list. Cpufreq will increase the frequency without the accompanying voltage increase, resulting in an unstable system. Remove them for now. We can revisit them with the new version of OPP bindings, which support boost settings and frequency ranges, among other things. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Olimex A10-Lime is known to be unstable when running at 1008MHz. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The socfpga.dtsi currently has the wrong interrupt number set for SPI master 1 Trying to use the master without this change results in the kernel boot process waiting forever for an interrupt that will never occur while attempting to probe any slave devices configured in the device tree as being under SPI master 1. The change works for the Cyclone V, and according to the Arria 5 handbook should be good there too. Signed-off-by: Mark James <maj@jamers.net> Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Commit 7800064ba507 ("ARM: dts: Add basic dm816x device tree
configuration") added basic devices for dm816x, but I was not able
to test the GPIO interrupts earlier until I found some suitable pins
to test with. We can mux the MMC card detect and write protect pins
from SD_SDCD and SD_SDWP mode to use a normal GPIO interrupts that
are also suitable for the MMC subsystem.
This turned out several issues that need to be fixed:
- I set the GPIO type wrong to be compatible with omap3 instead
of omap4. The GPIO controller on dm816x has EOI interrupt
register like omap4 and am335x.
- I got the GPIO interrupt numbers wrong as each bank has two
and we only use one. They need to be set up the same way as
on am335x.
- The gpio banks are missing interrupt controller related
properties.
With these changes the GPIO interrupts can be used with the
MMC card detect pin, so let's wire that up. Let's also mux all
the MMC lines for completeness while at it.
For the first GPIO bank I tested using GPMC lines temporarily
muxed to GPIOs on the dip switch 10.
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>