linux-stable.git/arch/arm/boot, branch v3.18.91

ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend

2017-12-25T13:20:08+00:00

[ Upstream commit 9bcf53f34a2c1cebc45cc12e273dcd5f51fbc099 ]

mmc2 used for wl12xx was missing the keep-power-in suspend
parameter. As a result the board couldn't reach suspend state.

Signed-off-by: Eyal Reizer 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: ti: fix PCI bus dtc warnings

2017-12-25T13:20:07+00:00

[ Upstream commit 7d79f6098d82f8c09914d7799bc96891ad9c3baf ]

dtc recently added PCI bus checks. Fix these warnings.

Signed-off-by: Rob Herring 
Cc: "Benoît Cousson" 
Cc: Tony Lindgren 
Cc: linux-omap@vger.kernel.org
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Revert "ARM: dts: imx53-qsb-common: fix FEC pinmux config"

2017-11-18T10:06:30+00:00

This reverts commit 2eb85ef18c6570e8a59643cd8d5a66122461b1fc which is
commit 8b649e426336d7d4800ff9c82858328f4215ba01 upstream.

Turns out not to be a good idea in the stable kernels for now as Patrick
writes:
	As discussed for 4.4 stable queue this patch might break
	existing machines, if they use a different pinmux configuration
	with their own bootloader.

Reported-by: Patrick Brünn 
Cc: Shawn Guo 
Cc: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: imx53-qsb-common: fix FEC pinmux config

2017-11-15T09:04:11+00:00

[ Upstream commit 8b649e426336d7d4800ff9c82858328f4215ba01 ]

The pinmux configuration in device tree was different from manual
muxing in /board/freescale/mx53loco/mx53loco.c
All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the
bootloader already did the correct pinmuxing for us.
But recently u-boot is migrating to reuse device tree files from the
kernel tree, so it seems to be better to have the correct pinmuxing in
our files, too.

Signed-off-by: Patrick Bruenn 
Signed-off-by: Shawn Guo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: n900: Mark eMMC slot with no-sdio and no-sd flags

2017-08-11T16:30:12+00:00

[ Upstream commit 4cf48f1d7520a4d325af58eded4d8090e1b40be7 ]

Trying to initialize eMMC slot as SDIO or SD cause failure in n900 port of
qemu. eMMC itself is not detected and is not working.

Real Nokia N900 harware does not have this problem. As eMMC is really not
SDIO or SD based such change is harmless and will fix support for qemu.

Signed-off-by: Pali Rohár 
Acked-by: Pavel Machek 
Signed-off-by: Tony Lindgren 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags

2017-07-05T12:35:14+00:00

commit 0c2bf9f95983fe30aa2f6463cb761cd42c2d521a upstream.

GIC_PPI flags were misconfigured for the timers, resulting in errors
like:
[    0.000000] GIC: PPI11 is secure or misconfigured

Changing them to being edge triggered corrects the issue

Suggested-by: Rafał Miłecki 
Signed-off-by: Jon Mason 
Fixes: d27509f1 ("ARM: BCM5301X: add dts files for BCM4708 SoC")
Signed-off-by: Florian Fainelli 
[AmitP: Resolved minor cherry-pick conflict]
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: at91: sama5d3_xplained: not all ADC channels are available

2017-05-25T12:18:01+00:00

commit d3df1ec06353e51fc44563d2e7e18d42811af290 upstream.

Remove ADC channels that are not available by default on the sama5d3_xplained
board (resistor not populated) in order to not create confusion.

Signed-off-by: Ludovic Desroches 
Acked-by: Nicolas Ferre 
Signed-off-by: Alexandre Belloni 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: at91: sama5d3_xplained: fix ADC vref

2017-05-25T12:18:01+00:00

commit 9cdd31e5913c1f86dce7e201b086155b3f24896b upstream.

The voltage reference for the ADC is not 3V but 3.3V since it is connected to
VDDANA.

Signed-off-by: Ludovic Desroches 
Acked-by: Nicolas Ferre 
Signed-off-by: Alexandre Belloni 
Signed-off-by: Greg Kroah-Hartman

ARM: kirkwood: ib62x0: fix size of u-boot environment partition

2016-10-04T04:53:44+00:00

[ Upstream commit a778937888867aac17a33887d1c429120790fbc2 ]

Commit 148c274ea644 ("ARM: kirkwood: ib62x0: add u-boot environment
partition") split the "u-boot" partition into "u-boot" and "u-boot
environment".  However, instead of the size of the environment, an offset
was given, resulting in overlapping partitions.

Signed-off-by: Simon Baatz 
Fixes: 148c274ea644 ("ARM: kirkwood: ib62x0: add u-boot environment partition")
Cc: Jason Cooper 
Cc: Andrew Lunn 
Cc: Gregory Clement 
Cc: Sebastian Hesselbarth 
Cc: Luka Perkov 
Cc: stable@vger.kernel.org # 3.13+
Reviewed-by: Andrew Lunn 
Signed-off-by: Gregory CLEMENT 
Signed-off-by: Sasha Levin

ARM: dts: sunxi: Add a startup delay for fixed regulator enabled phys

2016-08-22T16:23:04+00:00

[ Upstream commit fc51b632c7b047c25807023b76f3877aed19c770 ]

It seems that recent kernels have a shorter timeout when scanning for
ethernet phys causing us to hit a timeout on boards where the phy's
regulator gets enabled just before scanning, which leads to non working
ethernet.

A 10ms startup delay seems to be enough to fix it, this commit adds a
20ms startup delay just to be safe.

This has been tested on a sun4i-a10-a1000 and sun5i-a10s-wobo-i5 board,
both of which have non-working ethernet on recent kernels without this
fix.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede 
Signed-off-by: Maxime Ripard 
Signed-off-by: Sasha Levin