linux-stable.git/arch/arm/boot, branch v3.18.28 Linux kernel stable tree ARM: nomadik: set up MCDATDIR2 2016-02-15T20:42:40+00:00 Linus Walleij linus.walleij@linaro.org 2014-09-27T13:45:02+00:00 ccd187166380814719e4a0b4a8c64722a9566361 [ Upstream commit 43c4034963d6e838d971cbe59bfe84ae6e8370e6 ] This extra data line for high-speed MMC transfers was unrouted, set it up properly in the dtsi file. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> 
[ Upstream commit 43c4034963d6e838d971cbe59bfe84ae6e8370e6 ]

This extra data line for high-speed MMC transfers was unrouted,
set it up properly in the dtsi file.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
ARM: dts: at91: sama5d4: fix instance id of DBGU 2016-02-15T20:42:35+00:00 Mohamed Jamsheeth Hajanajubudeen mohamedjamsheeth.hajanajubudeen@atmel.com 2015-12-11T11:36:26+00:00 c8a18e001503246af09bc1ef8cbabe0ce2c60faa [ Upstream commit 929e883f2bfdf68d4bd3aec43912e956417005c7 ] Change instance id of DBGU to 45. Signed-off-by: Mohamed Jamsheeth Hajanajubudeen <mohamedjamsheeth.hajanajubudeen@atmel.com> Fixes: 7c661394c56c ("ARM: at91: dt: add device tree file for SAMA5D4 SoC") Cc: stable@vger.kernel.org # 3.18+ Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> 
[ Upstream commit 929e883f2bfdf68d4bd3aec43912e956417005c7 ]

Change instance id of DBGU to 45.

Signed-off-by: Mohamed Jamsheeth Hajanajubudeen <mohamedjamsheeth.hajanajubudeen@atmel.com>
Fixes: 7c661394c56c ("ARM: at91: dt: add device tree file for SAMA5D4 SoC")
Cc: stable@vger.kernel.org   # 3.18+
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
dts: imx25: fix sd card gpio polarity specified in device tree 2015-10-28T02:13:59+00:00 Dong Aisheng aisheng.dong@freescale.com 2015-07-22T12:53:03+00:00 dd1cb4f71ac173f0f3d0fd172d4a58f3aa23bb8b [ Upstream commit cf75eb15be2bdd054a76aeef6458beaa4a6ab770 ] cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios should be changed to GPIO_ACTIVE_HIGH. Otherwise, the SD may not work properly due to wrong polarity inversion specified in DT after switch to common parsing function mmc_of_parse(). Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> 
[ Upstream commit cf75eb15be2bdd054a76aeef6458beaa4a6ab770 ]

cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
dts: imx53: fix sd card gpio polarity specified in device tree 2015-10-28T02:13:58+00:00 Dong Aisheng aisheng.dong@freescale.com 2015-07-22T12:53:01+00:00 b2a9883c2f4079aca2a887cd76d87703fe387b60 [ Upstream commit 94d76946859b4bcfa0da373357f14feda2af0622 ] cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios should be changed to GPIO_ACTIVE_HIGH. Otherwise, the SD may not work properly due to wrong polarity inversion specified in DT after switch to common parsing function mmc_of_parse(). Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> 
[ Upstream commit 94d76946859b4bcfa0da373357f14feda2af0622 ]

cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
dts: imx51: fix sd card gpio polarity specified in device tree 2015-10-28T02:13:57+00:00 Dong Aisheng aisheng.dong@freescale.com 2015-07-22T12:53:00+00:00 8f29da13f064a6a0c8b07beaf9d1b0c980feb3f6 [ Upstream commit aca45c0e95dad1c4ba4d38da192756b0e10cbbbd ] cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios should be changed to GPIO_ACTIVE_HIGH. Otherwise, the SD may not work properly due to wrong polarity inversion specified in DT after switch to common parsing function mmc_of_parse(). Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> 
[ Upstream commit aca45c0e95dad1c4ba4d38da192756b0e10cbbbd ]

cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
ARM: dts: fix usb pin control for imx-rex dts 2015-10-28T02:13:04+00:00 Felipe F. Tonello eu@felipetonello.com 2015-09-16T17:40:32+00:00 3f052171735fc50371f5bd8beacbb5e44b9cb9da [ Upstream commit 0af822110871400908d5b6f83a8908c45f881d8f ] This fixes a duplicated pin control causing this error: imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_GPIO_1 already requested by regulators:regulator@2; cannot claim for 2184000.usb imx6q-pinctrl 20e0000.iomuxc: pin-137 (2184000.usb) status -22 imx6q-pinctrl 20e0000.iomuxc: could not request pin 137 (MX6Q_PAD_GPIO_1) from group usbotggrp on device 20e0000.iomuxc imx_usb 2184000.usb: Error applying setting, reverse things back imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D31 already requested by regulators:regulator@1; cannot claim for 2184200.usb imx6q-pinctrl 20e0000.iomuxc: pin-52 (2184200.usb) status -22 imx6q-pinctrl 20e0000.iomuxc: could not request pin 52 (MX6Q_PAD_EIM_D31) from group usbh1grp on device 20e0000.iomuxc imx_usb 2184200.usb: Error applying setting, reverse things back Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Fixes: e2047e33f2bd ("ARM: dts: add initial Rex Pro board support") Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> 
[ Upstream commit 0af822110871400908d5b6f83a8908c45f881d8f ]

This fixes a duplicated pin control causing this error:

imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_GPIO_1 already
requested by regulators:regulator@2; cannot claim for 2184000.usb
imx6q-pinctrl 20e0000.iomuxc: pin-137 (2184000.usb) status -22
imx6q-pinctrl 20e0000.iomuxc: could not request pin 137
(MX6Q_PAD_GPIO_1) from group usbotggrp  on device 20e0000.iomuxc
imx_usb 2184000.usb: Error applying setting, reverse things
back
imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D31 already
requested by regulators:regulator@1; cannot claim for 2184200.usb
imx6q-pinctrl 20e0000.iomuxc: pin-52 (2184200.usb) status -22
imx6q-pinctrl 20e0000.iomuxc: could not request pin 52 (MX6Q_PAD_EIM_D31)
from group usbh1grp  on device 20e0000.iomuxc
imx_usb 2184200.usb: Error applying setting, reverse things
back

Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Fixes: e2047e33f2bd ("ARM: dts: add initial Rex Pro board support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
ARM: dts: omap3-beagle: make i2c3, ddc and tfp410 gpio work again 2015-10-28T02:13:04+00:00 Carl Frederik Werner frederik@cfbw.eu 2015-09-02T01:07:57+00:00 f2895fb34aa0c955bf2590c8d36e22ec9fb0c043 [ Upstream commit 3a2fa775bd1d0579113666c1a2e37654a34018a0 ] Let's fix pinmux address of gpio 170 used by tfp410 powerdown-gpio. According to the OMAP35x Technical Reference Manual CONTROL_PADCONF_I2C3_SDA[15:0] 0x480021C4 mode0: i2c3_sda CONTROL_PADCONF_I2C3_SDA[31:16] 0x480021C4 mode4: gpio_170 the pinmux address of gpio 170 must be 0x480021C6. The former wrong address broke i2c3 (used by hdmi ddc), resulting in kernel message: omap_i2c 48060000.i2c: controller timed out Fixes: 8cecf52befd7 ("ARM: omap3-beagle.dts: add display information") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Carl Frederik Werner <frederik@cfbw.eu> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> 
[ Upstream commit 3a2fa775bd1d0579113666c1a2e37654a34018a0 ]

Let's fix pinmux address of gpio 170 used by tfp410 powerdown-gpio.

According to the OMAP35x Technical Reference Manual
  CONTROL_PADCONF_I2C3_SDA[15:0]  0x480021C4 mode0: i2c3_sda
  CONTROL_PADCONF_I2C3_SDA[31:16] 0x480021C4 mode4: gpio_170
the pinmux address of gpio 170 must be 0x480021C6.

The former wrong address broke i2c3 (used by hdmi ddc), resulting in
kernel message:
  omap_i2c 48060000.i2c: controller timed out

Fixes: 8cecf52befd7 ("ARM: omap3-beagle.dts: add display information")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Carl Frederik Werner <frederik@cfbw.eu>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets 2015-10-28T02:13:03+00:00 Grazvydas Ignotas notasas@gmail.com 2015-09-15T22:34:31+00:00 5dbe39d03864ebee88fa608d523c572dda91a9d6 [ Upstream commit 1dbdad75074d16c3e3005180f81a01cdc04a7872 ] The i2c5 pinctrl offsets are wrong. If the bootloader doesn't set the pins up, communication with tca6424a doesn't work (controller timeouts) and it is not possible to enable HDMI. Fixes: 9be495c42609 ("ARM: dts: omap5-evm: Add I2c pinctrl data") Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> 
[ Upstream commit 1dbdad75074d16c3e3005180f81a01cdc04a7872 ]

The i2c5 pinctrl offsets are wrong. If the bootloader doesn't set the
pins up, communication with tca6424a doesn't work (controller timeouts)
and it is not possible to enable HDMI.

Fixes: 9be495c42609 ("ARM: dts: omap5-evm: Add I2c pinctrl data")
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
ARM: dts: i.MX35: Fix can support. 2015-08-27T17:25:28+00:00 Denis Carikli denis@eukrea.com 2015-07-23T08:31:12+00:00 bcde729a9b3d09940941fa04c415cd7ac3b6f0b0 [ Upstream commit e053f96b1a00022b4e2c7ceb7ac0229646626507 ] Since commit 3d42a379b6fa5b46058e3302b1802b29f64865bb ("can: flexcan: add 2nd clock to support imx53 and newer") the can driver requires a dt nodes to have a second clock. Add them to imx35 to fix probing the flex can driver on the respective platforms. Signed-off-by: Denis Carikli <denis@eukrea.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> 
[ Upstream commit e053f96b1a00022b4e2c7ceb7ac0229646626507 ]

Since commit 3d42a379b6fa5b46058e3302b1802b29f64865bb
("can: flexcan: add 2nd clock to support imx53 and newer")
the can driver requires a dt nodes to have a second clock.
Add them to imx35 to fix probing the flex can driver on the
respective platforms.

Signed-off-by: Denis Carikli <denis@eukrea.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
ARM: dts: keystone: fix dt bindings to use post div register for mainpll 2015-08-22T18:05:32+00:00 Murali Karicheri m-karicheri2@ti.com 2015-05-29T16:04:13+00:00 582ce3de1705e5f91abde79431ae3cb9ddc7985d [ Upstream commit c1bfa985ded82cacdfc6403e78f329c44e35534a ] All of the keystone devices have a separate register to hold post divider value for main pll clock. Currently the fixed-postdiv value used for k2hk/l/e SoCs works by sheer luck as u-boot happens to use a value of 2 for this. Now that we have fixed this in the pll clock driver change the dt bindings for the same. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> 
[ Upstream commit c1bfa985ded82cacdfc6403e78f329c44e35534a ]

All of the keystone devices have a separate register to hold post
divider value for main pll clock. Currently the fixed-postdiv
value used for k2hk/l/e SoCs works by sheer luck as u-boot happens to
use a value of 2 for this. Now that we have fixed this in the pll
clock driver change the dt bindings for the same.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>