linux-stable.git/arch/arm/boot, branch v3.18.22

ARM: dts: i.MX35: Fix can support.

2015-08-27T17:25:28+00:00

[ Upstream commit e053f96b1a00022b4e2c7ceb7ac0229646626507 ]

Since commit 3d42a379b6fa5b46058e3302b1802b29f64865bb
("can: flexcan: add 2nd clock to support imx53 and newer")
the can driver requires a dt nodes to have a second clock.
Add them to imx35 to fix probing the flex can driver on the
respective platforms.

Signed-off-by: Denis Carikli 
Cc: 
Signed-off-by: Shawn Guo 
Signed-off-by: Sasha Levin

ARM: dts: keystone: fix dt bindings to use post div register for mainpll

2015-08-22T18:05:32+00:00

[ Upstream commit c1bfa985ded82cacdfc6403e78f329c44e35534a ]

All of the keystone devices have a separate register to hold post
divider value for main pll clock. Currently the fixed-postdiv
value used for k2hk/l/e SoCs works by sheer luck as u-boot happens to
use a value of 2 for this. Now that we have fixed this in the pll
clock driver change the dt bindings for the same.

Signed-off-by: Murali Karicheri 
Acked-by: Santosh Shilimkar 
Signed-off-by: Olof Johansson 
Signed-off-by: Sasha Levin

ARM: mvebu: update Ethernet compatible string for Armada XP

2015-07-05T14:12:54+00:00

[ Upstream commit ea3b55fe83b5fcede82d183164b9d6831b26e33b ]

This patch updates the Ethernet DT nodes for Armada XP SoCs with the
compatible string "marvell,armada-xp-neta".

Signed-off-by: Simon Guinot 
Fixes: 77916519cba3 ("arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces")
Cc:  # v3.8+
Acked-by: Gregory CLEMENT 
Reviewed-by: Thomas Petazzoni 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

ARM: at91/dt: sama5d4ek: mci0 uses slot 0

2015-07-04T03:02:23+00:00

[ Upstream commit ea25525ce0d195724fead07fe6562fe478a3bf6f ]

Mci0 uses slot 0 not 1.

Signed-off-by: Ludovic Desroches 
Fixes: 7a4752677c44 ("ARM: at91: dt: add device tree file for SAMA5D4ek board")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolas Ferre 
Signed-off-by: Sasha Levin

ARM: shmobile: r8a7791: Correct SDHI clock labels and output-names

2015-06-28T17:39:14+00:00

[ Upstream commit 2ea0d4ec39ac837e34c07b4783a7c900940e6eaf ]

There appears to have been some inconsistency and confusion here as on
the r8a7790 these clocks are referred to as SD(HI)1 and SD(HI)2 while on
the r8a7791 and r8a7794 they are referred to as SD(HI)2 and SD(HI)3.

Fixes: 59e79895b95892863 ("ARM: shmobile: r8a7791: Add clocks")
Reported-by: Geert Uytterhoeven 
Signed-off-by: Simon Horman 
Acked-by: Geert Uytterhoeven 
Signed-off-by: Sasha Levin

ARM: shmobile: r8a7791: add USBDMAC{0,1} clocks to device tree

2015-06-28T17:39:14+00:00

[ Upstream commit b9473d9f621b68327776b66d4b9a8ba5e0b8b4cb ]

Signed-off-by: Yoshihiro Shimoda 
Acked-by: Geert Uytterhoeven 
Signed-off-by: Simon Horman 
Signed-off-by: Sasha Levin

ARM: dts: imx27: only map 4 Kbyte for fec registers

2015-06-10T17:42:32+00:00

[ Upstream commit a29ef819f3f34f89a1b9b6a939b4c1cdfe1e85ce ]

According to the imx27 documentation, fec has a 4 Kbyte
memory space map. Moreover, the actual 16 Kbyte mapping
overlaps the SCC (Security Controller) memory register
space. So, we reduce the memory register space to 4 Kbyte.

Signed-off-by: Philippe Reynes 
Acked-by: Uwe Kleine-König 
Fixes: 9f0749e3eb88 ("ARM i.MX27: Add devicetree support")
Cc: 
Signed-off-by: Shawn Guo 
Signed-off-by: Sasha Levin

ARM: ux500: Enable GPIO regulator for SD-card for snowball

2015-06-09T17:43:32+00:00

[ Upstream commit 11133db7a836b0cb411faa048f07a38e994d1382 ]

Fixes: c94a4ab7af3f ("ARM: ux500: Disable the MMCI gpio-regulator by default")
Signed-off-by: Ulf Hansson 
Reviewed-by: Bjorn Andersson 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin

ARM: ux500: Enable GPIO regulator for SD-card for HREF boards

2015-06-09T17:43:32+00:00

[ Upstream commit f9a8c3914ba85f19c3360b19612d77c47adb8942 ]

Fixes: c94a4ab7af3f ("ARM: ux500: Disable the MMCI gpio-regulator by default")
Signed-off-by: Ulf Hansson 
Reviewed-by: Bjorn Andersson 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin

ARM: ux500: Move GPIO regulator for SD-card into board DTSs

2015-06-09T17:43:31+00:00

[ Upstream commit 53d2669844263fd5fdc70f0eb6a2eb8a21086d8e ]

The GPIO regulator for the SD-card isn't a ux500 SOC configuration, but
instead it's specific to the board. Move the definition of it, into the
board DTSs.

Fixes: c94a4ab7af3f ("ARM: ux500: Disable the MMCI gpio-regulator by default")
Signed-off-by: Ulf Hansson 
Reviewed-by: Bjorn Andersson 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin