linux-stable.git/arch/arm/boot, branch linux-5.17.y

ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1

2022-06-14T16:41:17+00:00

[ Upstream commit 4d338ee40ba89e508c5d3e1b4af956af7cb5e12e ]

Since mac0/1 and mac2/3 are physically located on different die,
they have different properties by nature, which is mac0/1 has smaller delay step.

The property 'phy-mode' on ast2600 mac0 and mac1 is recommended to set to 'rgmii-rxid'
which enables the RX interface delay from the PHY chip.
Refer page 45 of SDK User Guide v08.00
https://github.com/AspeedTech-BMC/openbmc/releases/download/v08.00/SDK_User_Guide_v08.00.pdf

Fixes: 2ca5646b5c2f ("ARM: dts: aspeed: Add AST2600 and EVB")
Signed-off-by: Howard Chiu 
Link: https://lore.kernel.org/r/SG2PR06MB23152A548AAE81140B57DD69E6E09@SG2PR06MB2315.apcprd06.prod.outlook.com
Signed-off-by: Joel Stanley 
Signed-off-by: Sasha Levin

ARM: dts: s5pv210: Remove spi-cs-high on panel in Aries

2022-06-09T08:26:29+00:00

commit 096f58507374e1293a9e9cff8a1ccd5f37780a20 upstream.

Since commit 766c6b63aa04 ("spi: fix client driver breakages when using
GPIO descriptors"), the panel has been blank due to an inverted CS GPIO.
In order to correct this, drop the spi-cs-high from the panel SPI device.

Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors")
Cc: 
Signed-off-by: Jonathan Bakker 
Link: https://lore.kernel.org/r/CY4PR04MB05670C771062570E911AF3B4CB1C9@CY4PR04MB0567.namprd04.prod.outlook.com
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: at91: sama7g5: remove interrupt-parent from gic node

2022-06-09T08:26:07+00:00

[ Upstream commit b7e86ef7afd128577ff7bb0db0ae82d27d7ed7ad ]

interrupt-parent is not to be used as a boolean property.
It is already present in the DT in the proper way it's supposed to be used:
interrupt-parent = <&gic>;

This is also reported by dtbs_check:
arch/arm/boot/dts/at91-sama7g5ek.dtb: interrupt-controller@e8c11000: interrupt-parent: True is not of type 'array'
	From schema: /.local/lib/python3.8/site-packages/dtschema/schemas/interrupts.yaml

Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Eugen Hristev 
Reviewed-by: Claudiu Beznea 
Signed-off-by: Claudiu Beznea 
Link: https://lore.kernel.org/r/20220503133127.64320-1-eugen.hristev@microchip.com
Signed-off-by: Nicolas Ferre 
Signed-off-by: Sasha Levin

ARM: dts: bcm2835-rpi-b: Fix GPIO line names

2022-06-09T08:26:02+00:00

[ Upstream commit 97bd8659c1c46c23e4daea7e040befca30939950 ]

Recently this has been fixed in the vendor tree, so upstream this.

Fixes: 731b26a6ac17 ("ARM: bcm2835: Add names for the Raspberry Pi GPIO lines")
Signed-off-by: Phil Elwell 
Signed-off-by: Stefan Wahren 
Signed-off-by: Florian Fainelli 
Signed-off-by: Sasha Levin

ARM: dts: bcm2837-rpi-3-b-plus: Fix GPIO line name of power LED

2022-06-09T08:26:02+00:00

[ Upstream commit 57f718aa4b93392fb1a8c0a874ab882b9e18136a ]

The red LED on the Raspberry Pi 3 B Plus is the power LED.
So fix the GPIO line name accordingly.

Fixes: 71c0cd2283f2 ("ARM: dts: bcm2837: Add Raspberry Pi 3 B+")
Signed-off-by: Phil Elwell 
Signed-off-by: Stefan Wahren 
Signed-off-by: Florian Fainelli 
Signed-off-by: Sasha Levin

ARM: dts: bcm2837-rpi-cm3-io3: Fix GPIO line names for SMPS I2C

2022-06-09T08:26:01+00:00

[ Upstream commit 9fd26fd02749ec964eb0d588a3bab9e09bf77927 ]

The GPIOs 46 & 47 are already used for a I2C interface to a SMPS.
So fix the GPIO line names accordingly.

Fixes: a54fe8a6cf66 ("ARM: dts: add Raspberry Pi Compute Module 3 and IO board")
Signed-off-by: Phil Elwell 
Signed-off-by: Stefan Wahren 
Signed-off-by: Florian Fainelli 
Signed-off-by: Sasha Levin

ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT

2022-06-09T08:26:01+00:00

[ Upstream commit 2c663e5e5bbf2a5b85e0f76ccb69663f583c3e33 ]

The GPIOs 30 to 39 are connected to the Cypress CYW43438 (Wifi/BT).
So fix the GPIO line names accordingly.

Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Signed-off-by: Phil Elwell 
Signed-off-by: Stefan Wahren 
Signed-off-by: Florian Fainelli 
Signed-off-by: Sasha Levin

ARM: dts: qcom: sdx55: remove wrong unit address from RPMH RSC clocks

2022-06-09T08:26:01+00:00

[ Upstream commit 97c246c825f73a018169834e56ffa9a89dea37a9 ]

The clock controller of RPMH RSC does not have 'reg' property, so should
not have unit address.

Fixes: bae2f5979c6e ("ARM: dts: qcom: Add SDX65 platform and MTP board support")
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20220411085935.130072-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin

ARM: dts: stm32: Fix PHY post-reset delay on Avenger96

2022-06-09T08:26:01+00:00

[ Upstream commit ef2d90708883f4025a801feb0ba8411a7a4387e1 ]

Per KSZ9031RNX PHY datasheet FIGURE 7-5: POWER-UP/POWER-DOWN/RESET TIMING
Note 2: After the de-assertion of reset, wait a minimum of 100 μs before
starting programming on the MIIM (MDC/MDIO) interface.

Add 1ms post-reset delay to guarantee this figure.

Fixes: 010ca9fe500bf ("ARM: dts: stm32: Add missing ethernet PHY reset on AV96")
Signed-off-by: Marek Vasut 
Cc: Alexandre Torgue 
Cc: Patrice Chotard 
Cc: Patrick Delaunay 
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue 
Signed-off-by: Sasha Levin

ARM: dts: imx6dl-colibri: Fix I2C pinmuxing

2022-06-09T08:26:01+00:00

[ Upstream commit 5f5c579a34a87117c20b411df583ae816c1ec84f ]

Fix names of extra pingroup node and property for gpio bus recovery.
Without the change i2c2 is not functional.

Fixes: 56f0df6b6b58 ("ARM: dts: imx*(colibri|apalis): add missing recovery modes to i2c")
Signed-off-by: Max Krummenacher 
Signed-off-by: Shawn Guo 
Signed-off-by: Sasha Levin