linux-stable.git/arch/arm/boot/Makefile, branch linux-4.7.y

Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild

2016-05-27T05:01:22+00:00

Pull kbuild updates from Michal Marek:

 - new option CONFIG_TRIM_UNUSED_KSYMS which does a two-pass build and
   unexports symbols which are not used in the current config [Nicolas
   Pitre]

 - several kbuild rule cleanups [Masahiro Yamada]

 - warning option adjustments for gcov etc [Arnd Bergmann]

 - a few more small fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (31 commits)
  kbuild: move -Wunused-const-variable to W=1 warning level
  kbuild: fix if_change and friends to consider argument order
  kbuild: fix adjust_autoksyms.sh for modules that need only one symbol
  kbuild: fix ksym_dep_filter when multiple EXPORT_SYMBOL() on the same line
  gcov: disable -Wmaybe-uninitialized warning
  gcov: disable tree-loop-im to reduce stack usage
  gcov: disable for COMPILE_TEST
  Kbuild: disable 'maybe-uninitialized' warning for CONFIG_PROFILE_ALL_BRANCHES
  Kbuild: change CC_OPTIMIZE_FOR_SIZE definition
  kbuild: forbid kernel directory to contain spaces and colons
  kbuild: adjust ksym_dep_filter for some cmd_* renames
  kbuild: Fix dependencies for final vmlinux link
  kbuild: better abstract vmlinux sequential prerequisites
  kbuild: fix call to adjust_autoksyms.sh when output directory specified
  kbuild: Get rid of KBUILD_STR
  kbuild: rename cmd_as_s_S to cmd_cpp_s_S
  kbuild: rename cmd_cc_i_c to cmd_cpp_i_c
  kbuild: drop redundant "PHONY += FORCE"
  kbuild: delete unnecessary "@:"
  kbuild: mark help target as PHONY
  ...

kbuild: delete unnecessary "@:"

2016-04-20T08:36:57+00:00

Since commit 2aedcd098a94 ('kbuild: suppress annoying "... is up to
date." message'), $(call if_changed,...) is evaluated to "@:"
when there is nothing to do.

We no longer need to add "@:" after $(call if_changed,...) to
suppress "... is up to date." message.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Michal Marek

ARM: 8557/1: specify install, zinstall, and uinstall as PHONY targets

2016-04-19T18:44:12+00:00

Obviously, these are PHONY targets.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Russell King

ARM: 8529/1: remove 'i' and 'zi' targets

2016-02-16T16:33:41+00:00

These two targets were introduced by commit 13d5fadf45d1 ("[ARM]
Make 'i' and 'zi' targets work") to short-circuit the dependencies
for 'install' and 'zinstall'.

After that, commit 19514fc665ff ('arm, kbuild: make "make install"
not depend on vmlinux') eventually made "(z)install" equivalent to
"(z)i".

It is true that 'i' and 'zi' might be still useful as shorthands
but the original intention had been already lost.

They do not even show up in "make ARCH=arm help", so I hope this
deletion does not have much impact.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Russell King

ARM: 8528/1: drop redundant "PHONY += FORCE"

2016-02-16T16:33:40+00:00

"PHONY += FORCE" is already cared by scripts/Makefile.build,
which this file is included from.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Russell King

kbuild: use relative path to include Makefile

2015-04-02T14:42:08+00:00

The "MAKEFLAGS += --include-dir=$(srctree)" line in the top Makefile
allows us to do this.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Michal Marek

arm, kbuild: make "make install" not depend on vmlinux

2013-10-02T20:30:35+00:00

Install targets (install, zinstall, uinstall) on arm have a dependency
to vmlinux. This may cause parts of the kernel to be rebuilt during
installation. We must avoid this since this may run as root. Install
targets "ABSOLUTELY MUST NOT MODIFY THE SOURCE TREE." as Linus
emphasized this in:

 http://lkml.org/lkml/2013/7/10/600

So on arm and maybe other archs we need the same as for x86:

 1648e4f8 x86, kbuild: make "make install" not depend on vmlinux

This patch fixes this for arm. Dependencies are removed and instead a
check to install.sh is added for the files that are needed.

This issue was uncovered by this build error where the -j option is
used in conjunction with install targets:

 $ make 
 $ make  zinstall
 ...
   DEPMOD
 Usage: .../scripts/depmod.sh /sbin/depmod 

(INSTALL_MOD_PATH and INSTALL_PATH variables set, so no root perms
required in this case.)

The problem is that zinstall on arm due to its dependency to vmlinux
does a prepare/prepare3 and finally does a forced rewrite of
kernel.release even if it exists already.

Rebuilding kernel.release removes it first and then recreates it. This
might race with another parallel make job running depmod.

So this patch should fix this one too.

Also quoting $(KERNELRELEASE) arg for install.sh as this messes
argument order in case it is empty (which is the case if the kernel
was not built yet).

Signed-off-by: Robert Richter 
Signed-off-by: Robert Richter 
Acked-by: Michal Marek .
Acked-by: Linus Torvalds 
Signed-off-by: "Yann E. MORIN" 
Signed-off-by: Michal Marek

ARM: dts: remove generated .dtb files on clean

2013-03-05T01:15:35+00:00

commit 5f300acd8ae9f3d4585154370012ffc5c665330f
(ARM: 7152/1: distclean: Remove generated .dtb files)
ensured that dtbs were cleaned up when they were in
arch/arm/boot.
However, with the following commit:
commit 499cd8298628eeabf0eb5eb6525d4faa0eec80d8
(ARM: dt: change .dtb build rules to build in dts directory)

make clean now leaves dtbs in arch/arm/boot/dts/
untouched. Include dts directory so that clean-files rule
from arch/arm/boot/dts/Makefile is invoked when make
clean is done.

Cc: Dirk Behme 
CC: Grant Likely 

Signed-off-by: Nishanth Menon 
Signed-off-by: Olof Johansson

ARM: 7656/1: uImage: Error out on build of multiplatform without LOADADDR

2013-02-23T14:06:27+00:00

On multiplatform kernels, $MACHINE will be empty so there will be no
default LOADADDR. Fail to build the uImage target unless one is provided by the
developer at build time.

Signed-off-by: Olof Johansson 
Acked-by: Nicolas Pitre 
Signed-off-by: Russell King

Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6

2012-12-11T19:30:41+00:00

Pull device tree changes from Grant Likely:
 "Here are the DT changes I've got queued up for v3.8.  As described
  below, there are a lot of bug fixes here and documentation updates but
  nothing major:

  Bug fixes, little cleanups, and documentation changes.  The most
  invasive thing here touches a bunch of the arch directories to use a
  common build rule for .dtb files.  There are no major changes to
  functionality here other than a few new helper functions."

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6: (34 commits)
  arm64: Fix the dtbs target building
  mtd: nand: davinci: fix the binding documentation
  rtc: rtc-mv: Add the device tree binding documentation
  devicetree/bindings: Move gpio-leds binding into leds directory
  of/vendor-prefixes: add Imagination Technologies
  microblaze: use new common dtc rule
  c6x: use new common dtc rule
  openrisc: use new common dtc rule
  arm64: Add dtbs target for building all the enabled dtb files
  arm64: use new common dtc rule
  ARM: dt: change .dtb build rules to build in dts directory
  kbuild: centralize .dts->.dtb rule
  Fix build when CONFIG_W1_MASTER_GPIO=m b exporting "allnodes"
  of/spi: Honour "status=disabled" property of device
  of_mdio: Honour "status=disabled" property of device
  of_i2c: Honour "status=disabled" property of device
  powerpc: Fix fallout from device_node->name constification
  of: add 'const' for of_parse_phandle parameter *np
  Documentation: correct of_platform_populate() argument list
  script: dtc: clean generated files
  ...