linux-stable.git/arch/arm/Kconfig.debug, branch v5.15

ARM: at91: debug: add sama7g5 low level debug uart

2021-07-19T12:32:11+00:00

Add sama7g5 SoC debug uart on Flexcom3. This is the UART that the
ROM bootloader uses.

Signed-off-by: Eugen Hristev 
Signed-off-by: Nicolas Ferre 
Link: https://lore.kernel.org/r/20210409113116.482199-2-eugen.hristev@microchip.com

Merge tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2021-07-10T16:22:44+00:00

Pull ARM SoC updates from Olof Johansson:
 "A few SoC (code) changes have queued up this cycle, mostly for minor
  changes and some refactoring and cleanup of legacy platforms. This
  branch also contains a few of the fixes that weren't sent in by the
  end of the release (all fairly minor).

   - Adding an additional maintainer for the TEE subsystem (Sumit Garg)

   - Quite a significant modernization of the IXP4xx platforms by Linus
     Walleij, revisiting with a new PCI host driver/binding, removing
     legacy mach/* include dependencies and moving platform
     detection/config to drivers/soc. Also some updates/cleanup of
     platform data.

   - Core power domain support for Tegra platforms, and some
     improvements in build test coverage by adding stubs for compile
     test targets.

   - A handful of updates to i.MX platforms, adding legacy (non-PSCI)
     SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform
     data and board fixups for iMX6/7.

  ... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
  Rockchip"

* tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits)
  MAINTAINERS: Add myself as TEE subsystem reviewer
  ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
  hw_random: ixp4xx: Add OF support
  hw_random: ixp4xx: Add DT bindings
  hw_random: ixp4xx: Turn into a module
  hw_random: ixp4xx: Use SPDX license tag
  hw_random: ixp4xx: enable compile-testing
  pata: ixp4xx: split platform data to its own header
  soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
  PCI: ixp4xx: Add a new driver for IXP4xx
  PCI: ixp4xx: Add device tree bindings for IXP4xx
  ARM/ixp4xx: Make NEED_MACH_IO_H optional
  ARM/ixp4xx: Move the virtual IObases
  MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree
  ARM: debug: add UART early console support for MSTAR SoCs
  ARM: dts: ux500: Fix LED probing
  ARM: imx: add smp support for imx7d
  ARM: imx6q: drop of_platform_default_populate() from init_machine
  arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
  soc/tegra: fuse: Fix Tegra234-only builds
  ...

Merge tag 'ixp4xx-arm-soc-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/soc

2021-06-24T01:47:40+00:00

This is a major chunk of IXP4xx modernization:

- Fist we move some registers around to make room for
  the predetermined PCI I/O space.

- Then we add some Kconfig options to make it possible
  to use the old PCI driver in parallell with the new
  shiny one.

- Then we add the new PCI driver and some bindings for
  it.

- On top of this we add an (ages old) patch from Arnd
  that centralize the CPU/SoC detection in drivers/soc
  and make the header a standard Linux header to avoid
  the  business in drivers.

- Then we split out and modernize some platform data
  headers for pata, and hwrandom, and top it up with
  DT bindings and support for hwrandom.

* tag 'ixp4xx-arm-soc-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
  hw_random: ixp4xx: Add OF support
  hw_random: ixp4xx: Add DT bindings
  hw_random: ixp4xx: Turn into a module
  hw_random: ixp4xx: Use SPDX license tag
  hw_random: ixp4xx: enable compile-testing
  pata: ixp4xx: split platform data to its own header
  soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
  PCI: ixp4xx: Add a new driver for IXP4xx
  PCI: ixp4xx: Add device tree bindings for IXP4xx
  ARM/ixp4xx: Make NEED_MACH_IO_H optional
  ARM/ixp4xx: Move the virtual IObases

Link: https://lore.kernel.org/r/CACRpkdbw6HSpp7k6q1FYGmtafLmdAu8bFnpHQOdfBDYYsdLbkw@mail.gmail.com
Signed-off-by: Olof Johansson

ARM/ixp4xx: Move the virtual IObases

2021-06-16T13:14:21+00:00

UART1, UART2 and the expansion bus config registers
are the only registers mapped in a fixed location
when using device tree.

For device tree we also want to get rid of the custom
 for IXP4xx. So we need to undefine
CONFIG_NEED_MACH_IO_H. Doing that activates the fixed
mapping of the PCI IO space to PCI_IO_VIRT_BASE which
is hardcoded to 0xFEE00000 and this would collide with
the old fixed mappings.

Move the fixed virtual IO base address from 0xFEF00000
to 0xFEC00000 in order to avoid the collision.

For the OF-only boot path let's even cut the reliance
on  and just hardcode the one single virtbase
we need apart from the UART, which is hardcoded in
Kconfig.debug.

Cc: Arnd Bergmann 
Cc: Imre Kaloz 
Cc: Krzysztof Halasa 
Cc: Zoltan HERPAI 
Cc: Raylynn Knight 
Signed-off-by: Linus Walleij

ARM: debug: add UART early console support for MSTAR SoCs

2021-06-15T15:29:15+00:00

This adds the debug_ll uart for the PM UART found on armv7-based MStar
SoCs.

Signed-off-by: Romain Perier 
Acked-by: Daniel Palmer 
Reviewed-by: Linus Walleij 
Tested-by: Mohammed Billoo 
Signed-off-by: Daniel Palmer 
Signed-off-by: Olof Johansson

ARM: 9070/1: Make UNWINDER_ARM depend on ld.bfd or ld.lld 11.0.0+

2021-06-07T11:56:19+00:00

When linking aspeed_g5_defconfig with ld.lld 10.0.1, the following error
occurs:

ld.lld: error: .tmp_vmlinux.kallsyms1:(.ARM.exidx+0x34D98): relocation
R_ARM_PREL31 out of range: 2135538592 is not in [-1073741824,
1073741823]

This was resolved in ld.lld 11.0.0 but the minimum supported version of
ld.lld for the kernel is 10.0.1. Prevent CONFIG_UNWINDER_ARM from being
selected in this case so that the problematic sections cannot be
created.

Link: https://github.com/ClangBuiltLinux/linux/issues/732
Link: https://github.com/llvm/llvm-project/commit/48aebfc908ba7b9372aaa478a9c200789491096e

Suggested-by: Nick Desaulniers 
Signed-off-by: Nathan Chancellor 
Reviewed-by: Nick Desaulniers 
Signed-off-by: Russell King

ARM: socfpga: introduce common ARCH_INTEL_SOCFPGA

2021-03-23T16:03:35+00:00

Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only
one for both of them.  This the common practice for other platforms.
Additionally, the ARCH_SOCFPGA is too generic as SoCFPGA designs come
from multiple vendors.

Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Dinh Nguyen

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

2021-02-22T22:27:07+00:00

Pull ARM updates from Russell King:

 - Generalise byte swapping assembly

 - Update debug addresses for STI

 - Validate start of physical memory with DTB

 - Do not clear SCTLR.nTLSMD in decompressor

 - amba/locomo/sa1111 devices remove method return type is void

 - address markers for KASAN in page table dump

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled
  ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void
  amba: Make use of bus_type functions
  amba: Make the remove callback return void
  vfio: platform: simplify device removal
  amba: reorder functions
  amba: Fix resource leak for drivers without .remove
  ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header
  ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions
  ARM: 9051/1: vdso: remove unneded extra-y addition
  ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible
  ARM: 9049/1: locomo: make locomo bus's remove callback return void
  ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void
  ARM: 9047/1: smp: remove unused variable
  ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores
  ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB
  ARM: 9042/1: debug: no uncompress debugging while semihosting
  ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support
  ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART
  ARM: 9039/1: assembler: generalize byte swapping macro into rev_l

ARM: 9042/1: debug: no uncompress debugging while semihosting

2021-02-01T19:42:10+00:00

The build robots have discovered that uncompress debugging
and semihosting does not play well together.

This is due to many factors but in general semihosting
debug needs to be rewritten to work the same way as any
LL_DEBUG, e.g. with a header in
arch/arm/include/debug/semihosting.S
This is a long term solution and needs testing on real
hardware and/or software models using semihosting.

For now disable uncompress debugging under semihosting.

Link: https://lore.kernel.org/linux-arm-kernel/CAK8P3a2MyLnULmUr4zgzkiWPiYfp+Xs8ruz9_q-PugVf_9DCCw@mail.gmail.com/
Reported-by: kernel test robot 
Reported-by: Alexandre Belloni 
Suggested-by: Arnd Bergmann 
Signed-off-by: Linus Walleij 
Signed-off-by: Russell King

ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support

2021-02-01T19:41:32+00:00

Add the entry for the STiH418 SBC UART0 low level uart.

Signed-off-by: Alain Volmat 
Reviewed-by: Linus Walleij 
Signed-off-by: Russell King