Pull ARM SoC platform updates from Olof Johansson:
 "New and/or improved SoC support for this release:

  Marvell Berlin:
     - Enable standard DT-based cpufreq
     - Add CPU hotplug support

  Freescale:
     - Ethernet init for i.MX7D
     - Suspend/resume support for i.MX6UL

  Allwinner:
     - Support for R8 chipset (used on NTC's $9 C.H.I.P board)

  Mediatek:
     - SMP support for some platforms

  Uniphier:
     - L2 support
     - Cleaned up SMP support, etc.

  plus a handful of other patches around above functionality, and a few
  other smaller changes"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  ARM: uniphier: rework SMP operations to use trampoline code
  ARM: uniphier: add outer cache support
  Documentation: EXYNOS: Update bootloader interface on exynos542x
  ARM: mvebu: add broken-idle option
  ARM: orion5x: use mac_pton() helper
  ARM: at91: pm: at91_pm_suspend_in_sram() must be 8-byte aligned
  ARM: sunxi: Add R8 support
  ARM: digicolor: select pinctrl/gpio driver
  arm: berlin: add CPU hotplug support
  arm: berlin: use non-self-cleared reset register to reset cpu
  ARM: mediatek: add smp bringup code
  ARM: mediatek: enable gpt6 on boot up to make arch timer working
  soc: mediatek: Fix random hang up issue while kernel init
  soc: ti: qmss: make acc queue support optional in the driver
  soc: ti: add firmware file name as part of the driver
  Documentation: dt: soc: Add description for knav qmss driver
  ARM: S3C64XX: Use PWM lookup table for mach-smartq
  ARM: S3C64XX: Use PWM lookup table for mach-hmt
  ARM: S3C64XX: Use PWM lookup table for mach-crag6410
  ARM: S3C64XX: Use PWM lookup table for smdk6410
  ...

Instead of having to add a new configuration option each time support for
new SoC is added, use CONFIG_DEBUG_UART_PHYS. For now,
CONFIG_DEBUG_UART_VIRT is automatically computed.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

With Bock-W, the last legacy platform has been removed.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The i.MX SoC changes for 4.3:
 - Add i.MX6 Ultralite SoC support, which is the newest addition to
   i.MX6 family.  It integrates a single Cortex-A7 core and a power
   management module that reduces the complexity of external power
   supply and simplifies power sequencing.
 - Change SNVS RTC driver to use syscon interface for register access,
   and add SNVS power key driver support.
 - Add a second clock for mxc rtc driver, and support device tree probe
   for the driver.
 - Add FEC MAC reference clock and phy fixup initialization for i.MX6UL
   platform.

* tag 'imx-soc-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  rtc: snvs: select option REGMAP_MMIO
  ARM: imx6ul: add fec MAC refrence clock and phy fixup init
  ARM: imx6ul: add fec bits to GPR syscon definition
  rtc: mxc: add support of device tree
  dt-binding: document the binding for mxc rtc
  rtc: mxc: use a second rtc clock
  input: snvs_pwrkey: use "wakeup-source" as deivce tree property name
  Document: devicetree: input: imx: i.mx snvs power device tree bindings
  input: keyboard: imx: add snvs power key driver
  Document: dt: fsl: snvs: change support syscon
  rtc: snvs: use syscon to access register
  ARM: imx: add low-level debug support for i.mx6ul
  ARM: imx: add i.mx6ul msl support

Signed-off-by: Olof Johansson <olof@lixom.net>

Add Kconfig entries, header file changes and addition to the documentation.
The early debug infrastructure is also added for easy development.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Enable low-level debug support for i.MX6UL by adding the
debug port definitions for the SoC.

Singed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

randconfig testing reveals that DEBUG_SET_MODULE_RONX needs to depend on
MMU otherwise these build errors are observed:

kernel/built-in.o: In function `set_section_ro_nx':
kernel/module.c:1738: undefined reference to `set_memory_nx'
kernel/built-in.o: In function `set_page_attributes':
kernel/module.c:1709: undefined reference to `set_memory_ro'

This is because the pageattr functions are not built for !MMU configs as
they don't have page tables.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Pull ARM updates from Russell King:
 "Bigger items included in this update are:

   - A series of updates from Arnd for ARM randconfig build failures
   - Updates from Dmitry for StrongARM SA-1100 to move IRQ handling to
     drivers/irqchip/
   - Move ARMs SP804 timer to drivers/clocksource/
   - Perf updates from Mark Rutland in preparation to move the ARM perf
     code into drivers/ so it can be shared with ARM64.
   - MCPM updates from Nicolas
   - Add support for taking platform serial number from DT
   - Re-implement Keystone2 physical address space switch to conform to
     architecture requirements
   - Clean up ARMv7 LPAE code, which goes in hand with the Keystone2
     changes.
   - L2C cleanups to avoid unlocking caches if we're prevented by the
     secure support to unlock.
   - Avoid cleaning a potentially dirty cache containing stale data on
     CPU initialisation
   - Add ARM-only entry point for secondary startup (for machines that
     can only call into a Thumb kernel in ARM mode).  Same thing is also
     done for the resume entry point.
   - Provide arch_irqs_disabled via asm-generic
   - Enlarge ARMv7M vector table
   - Always use BFD linker for VDSO, as gold doesn't accept some of the
     options we need.
   - Fix an incorrect BSYM (for Thumb symbols) usage, and convert all
     BSYM compiler macros to a "badr" (for branch address).
   - Shut up compiler warnings provoked by our cmpxchg() implementation.
   - Ensure bad xchg sizes fail to link"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (75 commits)
  ARM: Fix build if CLKDEV_LOOKUP is not configured
  ARM: fix new BSYM() usage introduced via for-arm-soc branch
  ARM: 8383/1: nommu: avoid deprecated source register on mov
  ARM: 8391/1: l2c: add options to overwrite prefetching behavior
  ARM: 8390/1: irqflags: Get arch_irqs_disabled from asm-generic
  ARM: 8387/1: arm/mm/dma-mapping.c: Add arm_coherent_dma_mmap
  ARM: 8388/1: tcm: Don't crash when TCM banks are protected by TrustZone
  ARM: 8384/1: VDSO: force use of BFD linker
  ARM: 8385/1: VDSO: group link options
  ARM: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations
  ARM: remove __bad_xchg definition
  ARM: 8369/1: ARMv7M: define size of vector table for Vybrid
  ARM: 8382/1: clocksource: make ARM_TIMER_SP804 depend on GENERIC_SCHED_CLOCK
  ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksource
  ARM: 8365/1: introduce sp804_timer_disable and remove arm_timer.h inclusion
  ARM: 8364/1: fix BE32 module loading
  ARM: 8360/1: add secondary_startup_arm prototype in header file
  ARM: 8359/1: correct secondary_startup_arm mode
  ARM: proc-v7: sanitise and document registers around errata
  ARM: proc-v7: clean up MIDR access
  ...

The i.MX SoC updates for 4.2:
 - Add new SoC i.MX7D support, which integrates two Cortex-A7 and one
   Cortex-M4 cores.
 - Support suspend from IRAM on i.MX53, so that DDR pins can be set to
   high impedance for more power saving during suspend.
 - Move i.MX clock drivers from arch/arm/mach-imx to drivers/clk/imx.
 - Move i.MX GPT timer driver from arch/arm/mach-imx into
   drivers/clocksource.
 - A couple of clock driver update for VF610 and i.MX6Q.
 - A few random code correction and improvement.

* tag 'imx-soc-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (44 commits)
  ARM: imx: imx7d requires anatop
  clocksource: timer-imx-gpt: remove include of <asm/mach/time.h>
  ARM: imx: move timer driver into drivers/clocksource
  ARM: imx: remove platform headers from timer driver
  ARM: imx: provide gpt device specific irq functions
  ARM: imx: get rid of variable timer_base
  ARM: imx: define gpt register offset per device type
  ARM: imx: move clock event variables into imx_timer
  ARM: imx: set up .set_next_event hook via imx_gpt_data
  ARM: imx: setup tctl register in device specific function
  ARM: imx: initialize gpt device type for DT boot
  ARM: imx: define an enum for gpt timer device type
  ARM: imx: move timer resources into a structure
  ARM: imx: use relaxed IO accessor in timer driver
  ARM: imx: make imx51/3 suspend optional
  ARM: clk-imx6q: refine sata's parent
  ARM: imx: clk-v610: Add clock for I2C2 and I2C3
  ARM: mach-imx: iomux-imx31: Use DECLARE_BITMAP
  ARM: imx: add imx7d clk tree support
  ARM: clk: imx: update pllv3 to support imx7
  ...

 Conflicts:
	arch/arm/mach-imx/Kconfig