linux-stable.git/arch/arm/Kconfig.debug, branch v4.19.321

ARM: fix function graph tracer and unwinder dependencies

2022-10-26T11:19:16+00:00

commit 503621628b32782a07b2318e4112bd4372aa3401 upstream.

Naresh Kamboju recently reported that the function-graph tracer crashes
on ARM. The function-graph tracer assumes that the kernel is built with
frame pointers.

We explicitly disabled the function-graph tracer when building Thumb2,
since the Thumb2 ABI doesn't have frame pointers.

We recently changed the way the unwinder method was selected, which
seems to have made it more likely that we can end up with the function-
graph tracer enabled but without the kernel built with frame pointers.

Fix up the function graph tracer dependencies so the option is not
available when we have no possibility of having frame pointers, and
adjust the dependencies on the unwinder option to hide the non-frame
pointer unwinder options if the function-graph tracer is enabled.

Reviewed-by: Masami Hiramatsu 
Tested-by: Masami Hiramatsu 
Signed-off-by: Russell King 
Signed-off-by: Sebastian Andrzej Siewior 
Reported-by: Danilo Cezar Zanella 
Signed-off-by: Greg Kroah-Hartman

ARM: 8800/1: use choice for kernel unwinders

2021-12-22T08:19:03+00:00

commit f9b58e8c7d031b0daa5c9a9ee27f5a4028ba53ac upstream.

While in theory multiple unwinders could be compiled in, it does
not make sense in practise. Use a choice to make the unwinder
selection mutually exclusive and mandatory.

Already before this commit it has not been possible to deselect
FRAME_POINTER. Remove the obsolete comment.

Furthermore, to produce a meaningful backtrace with FRAME_POINTER
enabled the kernel needs a specific function prologue:
    mov    ip, sp
    stmfd    sp!, {fp, ip, lr, pc}
    sub    fp, ip, #4

To get to the required prologue gcc uses apcs and no-sched-prolog.
This compiler options are not available on clang, and clang is not
able to generate the required prologue. Make the FRAME_POINTER
config symbol depending on !clang.

Suggested-by: Arnd Bergmann 
Signed-off-by: Stefan Agner 
Reviewed-by: Arnd Bergmann 
Signed-off-by: Russell King 
Signed-off-by: Anders Roxell 
Signed-off-by: Greg Kroah-Hartman

ARM: debug: enable UART1 for socfpga Cyclone5

2019-12-13T07:52:08+00:00

[ Upstream commit f6628486c8489e91c513b62608f89ccdb745600d ]

Cyclone5 and Arria10 doesn't have the same memory map for UART1.

Split the SOCFPGA_UART1 into 2 options to allow debugging on UART1 for Cyclone5.

Signed-off-by: Clément Péron 
Signed-off-by: Dinh Nguyen 
Signed-off-by: Sasha Levin

ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed

2019-12-05T08:19:49+00:00

[ Upstream commit 7c41ea57beb2aee96fa63091a457b1a2826f3c42 ]

If debugging on i.MX is enabled DEBUG_IMX_UART_PORT defines which UART
is used for the debug output. If however debugging is off don't only
hide the then unused config item but drop it completely by using a
dependency instead of a conditional prompt.

This fixes DEBUG_IMX_UART_PORT being present in the kernel config even
if DEBUG_LL is disabled.

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Shawn Guo 
Signed-off-by: Sasha Levin

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2018-08-23T20:44:43+00:00

Pull ARM 32-bit SoC platform updates from Olof Johansson:
 "Most of the SoC updates in this cycle are cleanups and moves to more
  modern infrastructure:

   - Davinci was moved to common clock framework

   - OMAP1-based Amstrad E3 "Superphone" saw a bunch of cleanups to the
     keyboard interface (bitbanged AT keyboard via GPIO).

   - Removal of some stale code for Renesas platforms

   - Power management improvements for i.MX6LL"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (112 commits)
  ARM: uniphier: select RESET_CONTROLLER
  arm64: uniphier: select RESET_CONTROLLER
  ARM: uniphier: remove empty Makefile
  ARM: exynos: Clear global variable on init error path
  ARM: exynos: Remove outdated maintainer information
  ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
  ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill
  soc: r9a06g032: don't build SMP files for non-SMP config
  ARM: shmobile: Add the R9A06G032 SMP enabler driver
  ARM: at91: pm: configure wakeup sources for ULP1 mode
  ARM: at91: pm: add PMC fast startup registers defines
  ARM: at91: pm: Add ULP1 mode support
  ARM: at91: pm: Use ULP0 naming instead of slow clock
  ARM: hisi: handle of_iomap and fix missing of_node_put
  ARM: hisi: check of_iomap and fix missing of_node_put
  ARM: hisi: fix error handling and missing of_node_put
  ARM: mx5: Set the DBGEN bit in ARM_GPC register
  ARM: imx51: Configure M4IF to avoid visual artifacts
  ARM: imx: call imx6sx_cpuidle_init() conditionally for 6sll
  ARM: imx: fix i.MX6SLL build
  ...

Kconfig: consolidate the "Kernel hacking" menu

2018-08-01T23:06:48+00:00

Move the source of lib/Kconfig.debug and arch/$(ARCH)/Kconfig.debug to
the top-level Kconfig.  For two architectures that means moving their
arch-specific symbols in that menu into a new arch Kconfig.debug file,
and for a few more creating a dummy file so that we can include it
unconditionally.

Also move the actual 'Kernel hacking' menu to lib/Kconfig.debug, where
it belongs.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Masahiro Yamada

ARM: debug: fix BCM2836 order entry

2018-06-18T16:30:14+00:00

Entries are sorted by their address value, except the BCM2836/KONA
which are not in the proper order.

Signed-off-by: Clément Peron 
Signed-off-by: Florian Fainelli

ARM: debug: Add iProc UART3 debug addresses

2018-06-18T16:30:13+00:00

Broadcom iProc SoCs typically use the UART3 for debug/console, provide a
known good location for that.

Signed-off-by: Clément Peron 
Signed-off-by: Florian Fainelli

ARM: debug-ll: Add support for r8a77470

2018-04-16T14:01:25+00:00

Enable low-level debugging support for RZ/G1C (r8a77470). RZ/G1C uses
SCIF1 for the debug console.

Signed-off-by: Biju Das 
Reviewed-by: Fabrizio Castro 
Reviewed-by: Geert Uytterhoeven 
Signed-off-by: Simon Horman

ARM: 8747/1: make CONFIG_DEBUG_WX depend on MMU

2018-03-24T14:27:48+00:00

Without CONFIG_MMU, this results in a build failure:

./arch/arm/include/asm/memory.h:92:23: error: initializer element is not constant
 #define VECTORS_BASE  vectors_base
arch/arm/mm/dump.c:32:4: note: in expansion of macro 'VECTORS_BASE'
  { VECTORS_BASE, "Vectors" },

arch/arm/mm/dump.c:71:11: error: 'L_PTE_USER' undeclared here (not in a function); did you mean 'VTIME_USER'?
   .mask = L_PTE_USER,
           ^~~~~~~~~~

Obviously the feature only makes sense with an MMU, so let's add the
dependency here.

Fixes: a8e53c151fe7 ("ARM: 8737/1: mm: dump: add checking for writable and executable")
Acked-by: Laura Abbott 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Russell King